How to make a Mini Christmas Tree - No floral foam needed

Flower Arranging Art Short Videos
7 followers
In today's video I'm going to show you how to create one of these modern Christmas trees
using just foliage.
If this is something that you would like to learn, keep watching today's tutorial.
So welcome back to another of one of my Christmas videos.
Now today I'm going to make a sort of topiary tree style arrangement.
This is a great one for those of you that can forage for greenery or that can buy greenery
from your florist shop.
Probably not a good one for those of you who can't get hold of any greenery at all.
But I'm really going to be using all the offcuts of foliage that have come from the wreath
making classes.
So here in the studio I do wreath making classes leading up to Christmas and we quite often
get left with lots of short pieces of greenery like this.
And this design is a great way of using up short bits of foliage.
So if you're part of a flower club or you want to do a fundraising event and you can
get hold of lots of bits of greenery, then this is a really good one to have.
Back last year I did a topiary tree here in the studio with my students.
This is the base that's been left from it.
So there is an old piece of floral foam on the top.
You don't necessarily need the foam.
You can use moss instead or you could use any type of cone or scrunched up newspaper.
You don't necessarily have to have water for this design because all of the evergreen foliage
will last without water.
The main reason for using this structure is because it's already prepared here in the
studio and we made these last year for classes.
So at the bottom there is postcrete, which is like a type of concrete that you can buy
in a DIY store that's holding a branch that has just been foraged for or is left from
some work we've done here in the studio.
And the reason that I didn't set it into a pot, a decorative pot, is so that I can swap
the containers around.
So if I just get this out of the bottom.
So it's basically sitting in just an ordinary plastic flower pot and that means that I can
move it from different containers.
When we did it here in the studio, we had a circular ball on the top, which would have
been your very traditional topiary tree.
This time I'm going to use moss to cover that.
And if you don't have a pre-made structure like this, any type of twig, branch, bamboo,
cane, anything that you have in the house, it doesn't have to be straight, it can be
gnarly and twisty.
If you're in the UK at the moment, we've just had lots of storms, so you might have
bits of branches laying around in the garden.
Set it in some postcrete or another piece of floral foam and then we're going to mould
on the top some moss.
So you can reuse an old piece of foam or you can just form yourself a circle or a cylinder
shape using some moss.
Now I've got, this is plate moss and you can always tell when it's plate moss because
when you pick it up, it all stays together.
But you might have the ordinary sphagnum moss, which is normally not quite as lush green
as this.
Oh, I don't want that bit because that's literally the soil underneath.
And I'm going to use some German pins just to secure that onto the ball.
Now you don't really have to do this.
If you can't get hold of moss, then you can skip this method or skip this part of the
demonstration.
But by adding the moss, it gives me a lovely surface colour to show through all the greenery
and it looks quite natural and far nicer than that block of foam.
For those of you who don't use floral foam, then what you want to do is just scrunch your
moss up into a ball, mould it around the stick and you'll have a mechanic to work with.
You could use one of those polystyrene cones and you could just mould some cardboard into
a shape.
But what we're looking for is just something to anchor the greenery to.
I'm going to be using the German pins throughout the demonstration, but you could use some
wire, which I'll explain as we're going along.
But I'm using the German pins pushed into the moss to hold it to the foam.
I'm not too concerned about the underside because you're not going to see that, but
I do want the sides completely covered.
What I will also do towards the end is put some moss in the base as well.
Don't panic if you don't have a piece of oasis on a stick like this.
Just mould some moss.
It could be a big bundle of conifer.
You just need something to give it a nice colour on the top.
Then I'm just going to squish it together so that we've got something to anchor my greenery
to.
And what I'm aiming to do is have a Christmas tree shape rather than a round ball.
But you could easily make a round ball as well, like a topiary tree.
So I'm going to look first of all for some longer pieces of greenery.
This one is cedar.
It's absolutely gorgeous, very textural, a lovely grey tone.
If you were using foam, then you can insert this into the foam.
But the idea with this one is that we just anchor into the sides different types of greenery
to create that Christmas tree effect.
And I'm going to vary the different textures.
You can add in two or three pieces at a time if you want some bulky weight.
But what we're looking for is that pointed Christmas tree effect.
Now here in the UK, we use a massive amount of floral foam
compared to a lot of the European cities.
So I just wanted to show you an alternative and to show you how you can not use floral foam.
And also if you're thinking about using moss, you can insert the ends of the foliage
straight into the moss a little bit like we do when we're doing Christmas wreaths.
But that's a bit more time consuming for a video.
So that's why I've gone with this method where I'm inserting them in.
And I don't know if I will show you the full video or whether we'll zoom on a little bit
so you can see how it comes together.
But this is a more natural style, something that you see more in places like Sweden,
Denmark, Holland and Finland and that type of thing.
So that is the base of the tree.
I know I've only done half of it, but that gives you a rough idea of what I'm trying to achieve.
If you've got thin types of greenery like the conifer, so this is just ordinary Leylandia,
I would probably suggest bunching a few pieces together.
If you've done Christmas wreath classes and you're used to placing greenery into little
bunches before you put it onto your wreath, then you could do that method here as well.
Now I've gone around one layer with that method.
Now I am standing really quite close to it, so I don't know what the overall shape is looking like.
But we've got that lovely base structure to my Christmas tree.
And now I just need to keep working towards the top.
And before I go any further, I'm going to change from using the German pins.
I'm going to use real wire instead.
And that will give you two different ways of creating this look.
But you want to make sure that you really push the German pins in so that nothing falls out.
And then I'll use a real wire.
So this is the 56 gauge real wire that you would usually use for wreath making.
I'm just going to take this around once and then pull it nice and tight.
And if you were using the moss ball and you didn't have the foam underneath,
you could use just the real wire, pull it nice and tight to create that ball structure
before you even start.
Now the difference with the real wire is that you have to make quite big bunches.
So the different types of greenery can pack together in bunches like this.
So that when you go around with the real wire, you're covering a much bigger area.
If you add one piece at a time, it'll take you forever.
And you'll have a lot of real wire on the top there,
add an extra weight, bulkiness to your design.
Conifer Arizona, which is this one here, this nice light fluffy grey one on the outside.
And I've also got some Nordman pine, which is like your Christmas tree.
And then this one, this more elongated one is needle pine.
And I am working on this one without my glasses on.
There is a funny story to go with my glasses.
I came to work this morning without my glasses, but I've always got a spare pair in work.
Found my spare pair in work and then went off and did a few jobs,
came back and couldn't find where my spare pair of glasses were.
I think I've dropped them in the rubbish bin or the compost bin.
I can't find them anywhere.
So I've lost two pairs of glasses today.
And then I had to pop off to what we call the pound shop here in the UK,
which does sell cheap spare glasses.
So I do have these very bizarre glasses to wear this afternoon.
And I'll be very grateful when I get home tonight
and I will be able to put my proper glasses on and I will be able to see far more clearly.
So the outline shape of this is probably not brilliant.
It is meant to be quite rustic and quite natural, very organic.
And I'm using up all those shorter bits of greenery that can sometimes get wasted.
If you do lots of wreath making classes like I do,
then we always get left with all these bits of greenery.
It doesn't matter how we try to control how much greenery people use.
There are always lots of small bits which you can't throw away because they're there
because I've paid a lot of money for them.
We have to be able to reuse them and recycle them.
Now, I quite like that messy look.
I don't want to have it really perfectly matching on either side.
I want something that's quite loose.
But if you take more time on creating yours,
the same foliages, you will get a much neater look.
Now I'm almost on the final layer.
I've just started a little section here for you to see how it's going.
Sometimes when we make topiary trees,
we add a piece of pine in the middle to give us this point.
But I want mine to come down more like a Douglas fir would be
rather than a round ball or a cone-shaped tree.
So what I'm going to do for the finished layer
is place lots of small pieces grouped together on top.
I've got rid of the real wire now and I'm just using the German pins.
But this is going to really nicely sit on the top there.
I missed that one.
And give me that nice finished shape that I'm looking for.
So the longer branches you've got are going to come towards the bottom.
If you haven't got ones that are quite as long as I'm using,
then you're just going to get a neater tree
and it won't be quite so raggedy on the end as the one I've got.
So I've pretty much gone all the way around.
Let's just get one more piece of the German pin in there.
I definitely think I need to add a longer bit in there just to get it more circular.
If we look at it from that side, I think it's a bit of a better shape.
I'm going to finish off this design with lots of greenery held together in a bunch.
I'm going to wrap it with my real wire,
which has suddenly decided to disappear from in front of me.
Here it is.
I'm going to use the real wire to wrap around the top really, really tightly.
I'm going to make sure that all the stems are at the same position
and I'm going to go round nice and tightly.
This is going to be covered at the end with a bow
or a star or some type of Christmas decoration.
Then I'm going to spread it out.
That is literally just going to sit on the top of the tree like that.
It covers all the moss but it gives me a nice shape and a good finish to the tree.
Before I finish, I've got these snow-covered branches
that you might have seen me use in some previous videos.
These have come in from the suppliers
but you could easily do this with the snow that comes from the craft shops.
I'm going to add that on around the outside.
When I finish the tree, you've got some white pieces, some white snowy branches,
just like my tree has been covered in snow.
Hopefully, they're a fairly similar size.
What I've done is I've fanned them out around the outside.
I'm going to wrap my real wire around again and close up.
You do have that ugly real wire showing
but a cone or a little natural star on there is really going to help cover it.
Then I can pop it back on top.
It's almost like a little hat sitting on the top.
I can fan that out.
That comes all the way around
and we've got a fairly even coverage of the white branches.
That's pretty much the finished tree.
I think from that angle, it works better for the camera.
I've made a very simple bow just to hang on the top of the tree.
Before I do that, I'm going to just neatly cover off the top part of the tree
so that we can't see too much of that wire on the top.
Then I can finish off with a very trendy velvet bow
that's going to sit just there on the top of the tree.
How you decorate your tree is entirely up to you.
You can have some Christmas lights on there or some oranges and apple slices.
That is my very natural and fairly organic Christmas tree.
I'll also finish the bottom off by adding in some of the moss.
You could add some foam in the bottom there and put some flowers in as well
but I'm thinking that the green moss there is going to look lovely and fresh at the bottom.
I'm not going to add any excessive decoration on there.
I'm not going to add anything that's artificial or synthetic.
You could quite easily decorate the stem of the topiary tree
with some of the matching ribbon from the top
but I'm going to leave it just as it is.
Something different as we lead up to Christmas 2024.
I hope you've thoroughly enjoyed that.
Don't forget to stay to the end because you'll see close-ups of the finished design.
Only 30% of the viewers are subscribed to the channel
so you really do need to hit that subscribe button.
It's very easy to do, doesn't cost you anything and it does help the channel grow.
So stay to the end, hit that subscribe button,
like and share and comment in the box below.
Let me know what you would see for 2025
and I look forward to seeing you for another video very soon.
Bye for now.
