Inside The World’s Biggest Crane Ship Ever Built

Explore - Places
9 followers
Aug 3, 2025
This is the secret piece of equipment that helps get fuel into all your vehicles worldwide.
And no, it's not a boat, a pipeline, or something in a factory.
Rather, they are known in the industry as semi-submersible crane vessels, or SSCVs.
These floating behemoths are what enable oil and natural gas companies to assemble their
offshore oil platforms. In addition to this, these monster cranes help build
offshore wind farms, lay underwater pipes, and so much more.
One of the largest cranes in the world still in service today is the Saipem 7000.
Construction began in 1985 by Italian firm Fincantieri-Cantieri at their Montfalcone
yard in Trieste, and the massive vessel was the first of its kind in Europe.
Due to its ginormous size, the vessel had to be made in the largest dry dock in the country,
normally reserved for warships for the Italian Navy.
After two years of work, the ship launched in 1987 for the first time, and it was massive.
Weighing in at 117,812 tons, the Saipem 7000 is the third largest by weight.
For its dimensions, it is 594 feet long, 261 feet wide, and its upper platform is 525 feet high.
The normal draft, or how low the vessel sits in the water when transiting, is 10.5 meters.
However, this draft increases to 27.5 meters when the Saipem 7000 ballasts down.
When any vessel ballasts down, the crew intentionally floods what are called
ballast tanks with seawater. Ships can do this for a variety of reasons, but in the case of SSCVs,
the crane ships do this to stabilize the unit when conducting heavy lift or deep sea operations,
and anchoring the vessel to the seafloor is not possible.
As for the Saipem 7000, the crane ship has a grand total of 40 ballast tanks with 81,000
cubic meters of water capacity. 14 of these ballast tanks are rapid ballast tanks with
a capacity of 26,000 cubic meters. Why one would need to use the rapid versus the normal ballast
tanks is a matter of convenience since if the lift is not as heavy, there's no need to fill
all the ballast tanks, which could take hours depending on the pump rate.
Powering the massive crane are 12 diesel generators capable of an output of 70,000
kilowatts of energy. These generators provide power to 12 AZI thruster engines. On the Saipem
7000, there are four thrusters on the bow, four on the stern, and one each on every port and
starboard quarter of the crane. When cruising from one destination to another, the Saipem 7000
can reach max speeds of 9.5 knots. However, only the aft AZI thrusters are needed when transiting.
But why? Because maintaining station during deep sea lift operations is paramount for the safety
of the crew and equipment. SSCVs and other deep sea vessels are equipped with technology called
Dynamic positioning has been around for decades, but its modern version is a far cry from what
first came out in the 1960s. Today, DP technology, as it is known, uses a variety of sensors and
equipment such as laser ring gyros and sensors that measure wind and current speed. Computer
algorithms then take this data and use it to give commands to the AZI thrusters to help maintain the
station during deep sea operations. But getting back to the Saipem 7000, the proverbial star of
the show is its lift capacity. The two primary cranes are port and starboard bow-mounted amhoist
heavy lift cranes. Each crane has a capacity of 7,000 tons, with a combined lift capacity of 14,000
tons for the vessel. These cranes can extend a maximum of 45 meters from the vessel and maintain
a 6,000 ton load each while doing so. They can also lower up to 450 meters below the waterline
to retrieve or place objects. In addition to these primary cranes, the Saipem 7000 has two
auxiliary cranes. The larger auxiliary crane is rated for 2,500 tons and another for 900 tons.
These smaller cranes are used for lighter lifts where it's not necessary to ballast or operate
the larger amhoist cranes. But while this crane might seem large, there is another one that takes
some of these impressive stats and blows them out of the water. The SSCV Fjalf is the second largest
SSCV by weight in the world. Completed in 1985 by the Japanese firm Mitsu Engineering and Shipbuilding
for McDermott International, it was bought by Dutch shipping company Harima Marine Contractors in
1997 as its flagship underwater crane vessel, and it truly earned that spot. Coming in at 136,709
tons, the Fjalf is about 25,000 tons heavier than the Saipem. As far as dimensions, it's about 606
feet long, 264 feet wide, and 312 feet high. The transit draft is 11.9 meters and the vessel can
ballast down to a lift draft of 31.6 meters. Twelve diesel engines with a similar AZ thruster
are powering this monster set up similar as the Saipem 7000. However, unlike the Saipem,
the Fjalf can only travel a max speed of 7 knots while transiting, which could indicate that the
power output or thrusters of the Saipem are more powerful. However, the lift capacity on the Fjalf
is better. The primary cranes on the SSC Fjalf are two port and starboard bow cranes, each with a
lift capacity of 7,100 tons. While the Fjalf has a combined total of 200 more tons of lift than
the Saipem 7000, its primary cranes can only safely extend to 31.2 meters, about 14 meters
less than the Saipem. However, it can extend its cranes much deeper. The Fjalf's auxiliary
cranes have a maximum depth of 850 meters at 900 tons of lift capacity. In addition to this crane,
Fjalf has another auxiliary crane with a lift capacity of just 200 tons but can extend up to
433 feet from the vessel. But cranes are not the only things Fjalf has on board. Besides housing
736 workers, the Fjalf is also equipped with a fully stocked helicopter pad and saturation
diving chamber. Because extensive underwater work is required, this chamber is crucial to ensuring
the safety of divers who might spend weeks at a time under the sea. As far as some noteworthy
projects are concerned, the SSCV has held two previous world records. One of these was for an
11,883 ton lift for Shell's Shearwater platforms, which was the heaviest lift on record for a time.
In addition, the Fjalf also set a world record for the heaviest lift in the Gulf of Mexico
when it installed a 7,810 ton spar for a new BP oil rig in 2004. However, since those lifts,
Saipem's 7,000 beat those records in the coming years with lifts that were several thousand tons
heavier, including the Sabratha deck lift at 12,150 tons. Because of this, though the Fjalf
might be slightly larger, it was later beaten out by the Saipem 7,000 for some of its records.
But this neck-and-neck competition would all change with the creation of the world's largest SSCV.
Named after Odin's eight-legged horse, the SSCV Sleipnir is the world's largest SSCV by a long
shot. Completed in 2019 by Singapore-based marine builder Semcorp Marine, the massive
vessel was so large that it had to first be assembled in China with each piece brought
on a Roro cargo ship meant for carrying cars and assembled in Singapore. When the ship was
finally delivered to Harima Marine, it was and remains today an engineering marvel. Weighing in
at 273,700 tons, it is over double the weight of the SSCV Fjalf. The SSCV Sleipnir is 660 feet long,
306 feet wide, and 720 feet tall. With a transit draft of 12 meters, the Sleipnir can ballast down
to 39 meters when working. Powering this massive beast requires a lot of power, and its 12 generators
can produce almost 100,000 megawatts of power. These generators help power the eight AZ thrusters
on the bow and stern, propelling this beast 10 knots from point to point. As an interesting aside,
because of Harima's dedication to being a carbon-neutral company, the Sleipnir can be powered
by fuel, liquefied natural gas, or LNG. However, LNG as a power source is certainly unique, and the
Sleipnir can store so much of it that the crane can operate for a month, 24 hours a day, without
needing a refuel. But what about its lift capacity? The prime movers of the Sleipnir are its two
cranes, each having a lift capacity of 10,000 tons. Unlike the previous two cranes, the Sleipnir
can maintain this weight up to 48 meters out from the vessel. Beyond 48 meters, the crane can
maintain a 7,000-ton lift capacity on each crane up to a 62-meter radius and a 4,000-ton capacity
at 82 meters from the craft. All told, the Sleipnir can extend its primary cranes up to 129 meters
from the vessel. In addition to its primary lift capacity swinging outward, the deep-sea lift of
the two previous cranes cannot even compare. With a lift capacity of 1,000 tons at 1,000 meters below
sea level, 76 tons at 1,500 meters, and an astounding 240 tons at 3,000 meters below the
surface of the water, the Sleipnir can reach places no other crane has done before. And the
hardware used to accomplish these feats are massive. 1,100 ultra-large bolts weighing 88 pounds
each hold these huge cranes in place. The crane's 30-meter-wide bearings, the largest such components
in the world, help them rotate. In addition to these huge cranes, the SSCV Sleipnir comes standard
with a helipad, living accommodations for 400 workers, and a revolutionary dynamic positioning
system that can keep the crane within one square meter of its intended position. With all this
amazing capability, the SSCV Sleipnir has been busy at work since its launch in 2019 and has
already set a world record. In 2019, within the first six months of launch, the Sleipnir was
helping Israel develop its Leviathan natural gas field in the eastern Mediterranean. On that balmy
September evening, the Sleipnir made history when it lifted the 15,200-ton platform deck onto the
spar of the Leviathan oil platform. Since then, the Sleipnir and the other two cranes, for that matter,
have been busy working in the North Sea, helping countries like Germany, the UK, and Denmark
maintain oil and natural gas platforms, install wind farms, and complete many other projects.
What the future holds for the Sleipnir and its sister cranes is virtually limitless,
thanks to their amazing lift capacity, which helps keep the world's energy market moving. Bye for now!
