Need a better way to show off your small items at craft shows? We built the ultimate Rotating Pegboard Display Rack—and it might just be our most versatile laser-cut creation yet! 🧰🎨
In this episode, we challenged ourselves to level up our craft booth again—this time with vertical space in mind. Using only Adobe Illustrator and LightBurn, we designed a modular pegboard-style rack that rotates, breaks down flat, and holds everything from ornaments and keychains to magnets, stickers, patches, and more!
💡 Don’t know CAD? No problem. We designed the entire thing in Illustrator with laser crafters in mind! Whether you’re using a xTool, Glowforge, OMTech, or Aeon, this is a must-see build for anyone prepping for markets, pop-ups, or vendor events.
✨ In This Video:
Design & prototype process (no 3D modeling required!)
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
We've been challenged to take our craft
booth up a level. What do we mean by
that? We'll show you right now.
[Music]
>> What is up? Welcome back. Do you like to
do it build it or make it?
>> So do we.
>> Last week we leveled up our game with
this craft booth hanging tent sign. This
week we're taking it to another level.
>> Mhm. We're going to use our vertical
space and we're going to go vertical
with a twist.
>> On last week's patron call, we were
talking about the master tier file drop,
which is ornaments. And someone asked
about a rotating ornament display. Now,
that is something I've been wanting is a
display rack for more than just
ornaments. I don't know any 3D modeling
software. I don't know any CAD software.
So, I'm going to see if I can do this
just using Illustrator and LightBurn. I
don't know.
Step one, we're going to gather all of
our requirements. Before I start doing
any design work, I need to know exactly
what this thing is supposed to do. I
know two things. It needs to hang
ornaments and rotate.
I have a lazy Susan.
>> That's all he's excited about. This has
been hanging around for a couple of
years now. So, he's super stoked.
>> And it's been out all week. There's been
a lot of DJing and scratching happening.
>> You know, there has.
>> It's been It's been a traveling DJ.
>> All right, let's talk about what I want
my requirements to be. I want this to do
more than just ornaments. Now, this is
the perfect time of year to start
thinking about your craft booth as we
enter the holiday season, but I want
this to be an allseason type thing. And
I wanted to do more than ornaments
because now that we have these UV
printers, I want it to hold stickers. I
wanted to hold magnets. Are you
listening? Because this is for you.
>> Stickers, magnets. I wanted to hold
keychains. Uh I wanted to hang. I needed
to have shelves. And I need to be able
to move it around. Part of the problem
with our craft booth displays is there's
not a hole right in the center. And
sometimes I want to hang stuff right in
the center. So for this we are
definitely want I definitely want it to
be versatile.
>> So you want it pegboard.
>> Yes.
>> You want pegs. You want it versatile.
>> Yes.
>> Are you going to want to be able to
break it down
>> or is it going to be stationary? Like
once I build it, it's built.
>> Well, I can be flexible on that, but I
would really rather it break down.
>> Does it need to fit in a wagon?
>> I don't want to have to walk around with
this big thing.
>> So what I'm hearing is it needs to be
super versatile. It needs to rotate. It
needs to be able to hang things, put
things on shelves, and it needs to be
able to be broken down and set up, and
I'm assuming fairly easily.
>> Yes. Let's go with that. And turn on
your 3D brain since you can't 3D model
this thing.
And see what you can do.
>> Step two, we're going to test some
design ideas. I drew up a couple of
design ideas that I had on this old
notebook. I think it's uh some math from
2020 about order of operations.
>> Yeah, I don't know this rando sheet in
the back of this notebook.
>> But I jotted down some designs here. I'm
going to jump over into Illustrator and
we're going to see about making some
quick connects to assemble it quickly.
And then we're going to work on our
hooks and hangers. Inside Illustrator, I
just drew some basic shapes. I'm just
doing a proof of concept. It doesn't
need to be the whole thing. So these
yellow objects, those are going to be
the backer. Everything in red are going
to be subtracted from. So these are my
slot holes and my slots. Everything in
green are additions to the body and
those are going to be my tabs. And these
are going to be my little hooks over
here. And everything in purple or
fuchsia, those are just guides so I know
how thick to make things. So right now
everything's set to 0.25.
So I'm going to hide my guides. I'm
going to select everything on the tabs
layer. Oh yeah, I also have everything
on layers to make it easier. I'm going
to select everything on my tabs layer
and everything on my body layer. And
we're going to unite these.
Now, I'm just going to grab everything.
I'm going to grab everything up here.
These are grouped, huh? That's right.
Ungroup.
Now, I'm going to grab everything here.
Minus. Grab everything here. Minus. I'm
going to grab them all. We'll lose the
fill.
We'll give them a red stroke.
And now we'll say file,
export as
SVG. We'll say export.
Export.
We'll go right into LightBurn. We'll
import this into LightBurn. Grab the
SVG. I know how big my material is. I
have a jig inside my laser. So, I'm
going to slam this bottom left.
I have plenty of room on my on my
material. And we'll just send it to my
Eon. 10 and 50 is my power. Send. Yep.
[Music]
Back with some of my testing pieces. I
didn't need to make the whole thing. I
just needed enough to prove out some of
my ideas. So, we have the quick connect
here. I have a big slot on this side,
like a hook tab on this side. My idea is
there's enough room. It easily just
slide together. That was pretty quick.
>> Why wouldn't you just insert it? Why are
you making a hook? Because like with
this hook, it's kind of
>> it's never gonna slip out.
>> Yeah, it's not gonna slip out. And I
wanted it to be able to be a quick
connect. So, it's got a pretty loose
fit.
>> Well, it's loose fit.
>> And I figured the base and the top will
help hold it. I like these peg boards.
>> Yes.
>> But I feel like they might be too spaced
apart. Like I'm limited here. Do I add
one in between each?
>> Well, all right. So, I had been given
some thought to that. And then I don't
know what these square things are. Is
this a shelf holder?
>> These are my testing nubs. This is a
test nub, Kim. I just wanted to see if
the hook piece worked on the slot.
>> What is this square? Is there a shelf
going to sit on that? What's happening?
>> No, this is just a test nub. I wasn't
going to build out a whole shelf and all
the hooks if my my little nub back here
didn't work.
>> It's just a hook.
>> If my hook didn't work, I didn't need to
build the rest of this out. So, this is
just my test nub.
They are just indescript pieces that I'm
actually just testing to see if they
hang and if they fall out fall out.
>> Fell out.
>> Fell out. But they seem to be in there
pretty good.
>> All right.
>> I can move the whole thing around with
this one little nub here.
>> Good. Because you know someone's going
to grab this and give it the
>> Uhhuh.
>> a wheel of fortune spin on it.
>> Here. You want a wheel of fortune spin
that guy?
>> Uhhuh. Ready?
I need to put
All right. All right. Well, I mean,
we'll
>> figure out how to attach it to the lazy
Susan.
>> All right. So, I have another question.
I see you've got your peg bird.
>> My peg bird.
>> Your peg bird. And I can see these
things slide in.
>> Yeah.
>> But is it possible to do the offset
hooks? Kind of like our wall control
system, you know?
>> Oh,
>> an offset.
>> Have two sets of pegboard holes.
>> Yes. But uh
>> like an offset down here in the middle.
>> Yes. Now I should because you're going
to cut this one time and
>> I mean Yeah. That's going to be
>> a long cut. Yes.
>> Like this was pretty long.
>> Yes. A long cut. But it's You're only
doing it one time.
>> Only doing it one time.
>> Yes.
>> All right. Yep. I'll put a new pattern
in here. I think the hooks fit. So I'll
keep this
>> slot hook. I like what you got going
there. And then I'll just add a second
offset
>> level of holes in there.
>> Okay.
>> All right. All right. I got you. Let's
come together.
>> Step three. It's time to prototype. So,
we did some design work. We proved out
that our quick connects work. We proved
out that the pegs work. We need to add
some more holes. But for this one, we're
not going to cut any holes. We're just
going to do a fullsize prototype to get
a feel of the size of this thing. I
mean, it's got to fit on my my DJ disc
here
>> and not be too heavy and continue to
rotate. Let's just see. Let's just see.
>> Back in Illustrator to do our prototype.
Same setup as last time. Yellow is the
body. Red is everything that's going to
be a hole. Green is everything that's
going to be added onto usually a tab.
So, let's hide our guides.
We will grab our tabs and our body.
We'll say unite and ungroup.
Ungroup.
I don't want to cut out all of these
little holes for the pegboard right now.
I think the cardboard will just burn up.
So, we'll hide those.
Now, I'm going to grab these and say
subtract. Grab these.
Say subtract.
Grab these guys.
What am I doing? Subtract them. And then
finally, these guys. Subtract. Control A
to grab everything. We'll lose the fill.
Give it a red stroke.
And we're going to export this as an
SVG.
Export.
Yes. Jumping right into LightBurn. We
can delete this now. We know it works.
Let's import our prototype.
Full size test.
I'm going to drop it in the bottom left
corner again. And I have a bigger sheet.
It's 48. We're at 47 and a half. All
right, let's send it.
[Music]
We're back. No fire. I was on firewatch
yet. I didn't have to put out anything.
So, this is a
>> This is like bummer.
>> This is just a full size.
>> I was I was all ready. I was ready to
go.
So, this is a full size, but I know the
tabs aren't going to work because,
you know, they're too skinny. And I
didn't do all four sides. I don't think
I need to. I just need to make sure it
worked. And we can see the size of this
thing and make sure it all goes
together. Right.
>> Got it. Okay.
>> Well, I can see right off the bat that I
forgot my top tabs. So,
>> Well, that's good. Okay. All right.
>> So, my top I need the top tabs. And you
want me to hold the bottom for you?
>> Yeah. Lift it up and we'll put the base
in.
Oh. Oh, you know what? Because I added
these hooks on the outside here, there's
actually a rectangle, not a square base.
So, I'm going to need to make the base a
slight rectangle
cuz these tabs don't fit in the slots,
>> right?
>> Yeah. I mean, I I bent the cardboard on
my side, but I don't think that's
happening with the MDF.
>> All right. All right. So, I'll add the
tabs. We'll put the new pattern in the
>> the new pegboard pattern in. I'll fix
the bottom.
>> Mhm.
>> I think that's it, right?
>> Okay. Well, one small problem I see
here.
>> Yeah.
>> But this put it on the thing. I think
it's looking pretty good.
>> It's giant sized.
So, this is this is great. I think
you're
>> got to be this size because of our lazy
Susan is a 12 in lazy Susan.
>> Well,
>> she's a big lazy Susan.
>> She's a big Susan.
>> Big Susan.
>> Well,
>> big Sue.
>> Big Sue here.
>> Big Sue coming through.
>> Big Sue is too big for our craft booth.
I don't know if you can tell. I don't
know if you can really see, but let me
just show you in relation to me. This is
just too big of a wreck.
>> Well, here. Let's see. I don't know. I
don't need all this open space. I don't
need it to be quite this wide because
this is going to take up Well, how big
is this thing? What do you got going
here?
>> It's 13 in.
>> Oh my.
>> It's 13 in by 13 in by 20
>> because of your 12 inch lazy sea.
>> Yeah, I have a I have Big Sue is on the
bottom. When you got big Sue on the
bottom, you got to go big up top. Just
saying.
>> No. So, this is not I have a four foot
table that this is gonna sit on or
>> Oh, it's four foot by like 18 inches and
at 13 inches.
>> Well, yeah. I don't think it's it's
>> that's really going to take up a lot of
room. I guess
>> that's the whole like I'll be like, "Can
I check you out here next to this?"
>> Oh, yeah. They won't be able to put
anything up on the table then between
the crate
>> that or if I'm using my checkout
counter, it gets even narrower up top.
>> Yeah.
>> So, I need this thing to Can you dial it
back a little? Well, we're going to have
to go find a replacement for Big Sue.
>> We're going to have to find a little
Sue.
>> All right, I'll run into I'll run and go
find a little Sue and do some redesign.
We'll be back.
[Music]
Step four, it's time for the beta
version. We're going to make all of our
cuts. I did find a little Sue. I got Big
Sue.
>> So,
>> she's out.
>> I'm going to make all of the adjustments
and everything that we've learned from
the previous steps. I'm going to put
those in, adjust it in Illustrator.
We're going to cut everything. All of
our shelves, hooks,
>> backers, tops, little sign pieces.
>> We're going in.
>> We're going full beta test to test every
aspect of this design.
[Music]
back with all of our pieces. I know.
Look at this. A lot of pieces.
>> Fun kit. It's like a whole It's like a
whole kit.
>> I love it. I love it. I'm excited.
>> We put the new pattern. We put the new
pegboard pattern in there. I think it
makes it a lot more versatile.
>> Yes. I love that. I remembered my top
tabs. We shrank it a bit. I think we're
good. We got little Sue.
>> Little Sue.
>> All right. I think we just start putting
it together.
>> All right.
>> Now, the big tabs go on the bottom.
Little tabs go on top.
>> No. What's that mean? Oh, I see.
>> The big tabs go into a thicker base.
Yeah.
>> Uh-huh. Uh-huh. I got it. I can see it.
It's obvious.
>> Big tabs.
>> That was quick.
Why are there two of these?
>> Uh, there's two bottoms to make it thick
so it'll be stable.
>> Uh-huh.
>> Then this bottom with no holes will get
attached to Sue and sit on the the
table.
>> Okay.
>> This one with the holes is double thick.
Again, placement for little Sue. And
then that will go on.
And then this is the topper with the big
holes.
>> That way we can put some advertising up
there. I have it. So, there's two
pieces. You could advertise two
different things on either side, and
that should fit right in the top. All
right.
All right. I think I need to make these
holes on the top and base just to
>> I don't know.
>> Give us a little more room.
>> Well, I guess Are we painting or
staining? If we paint, I'm going to need
a little more room.
>> I don't know. Not that far yet.
>> Hey.
>> Okay. Okay, put little Sue in there.
>> All right, Sue, get up there, girl.
You're up.
>> You're up, Sue.
>> Come on, baby Sue.
>> Baby Sue.
>> All right. There we look at that.
>> All right. Let's put some shelving in
here.
>> Yeah. What we got here? What do we got?
>> So, I have some of those little cubby
things. These are the the cubby hole
pieces.
They have some that are straight and I
have some that have a slight slant in
them.
>> Uhhuh. Notice the back.
>> So, we'll just use some straight ones.
>> Put them up there. Here are the bottoms
of the shelves.
>> So, you got different size shelves.
Small, medium, medium.
>> Small small.
>> It'll take up
>> two smalls, two mediums,
>> two rows or two columns, three columns,
four columns, or span the whole thing.
>> Mhm.
Now you just slide it. It
>> seem a little loosey goosey.
>> Well, it does. It's supposed to be for
like quick assembly.
>> Okay. I see that I need to bring this
slot back.
>> Uhhuh.
>> On this shelf here. Just a quarter inch.
>> There's a There's a gap back there.
>> Yeah, it's like a quarter inch gap.
Okay. Version two. I'll make some
adjustments.
>> Okay. All right.
>> And these are the front pieces.
>> Oh, and I see you've got some acrylic
versions. Get out of here. I want this
version.
>> Okay. I see what the acrylic versions
Oh, I don't know. It doesn't matter if
it's loose in there.
>> Oh, yeah. No, it's not actually. It's
just a window.
>> It's just there to hold it.
>> Now, what about a divider? I want to be
able to
>> I got you, girl. I made some
>> different box.
>> Nope.
>> Oh,
>> boom. Divider. Oh.
>> So, well, what a
>> little bit of an angle. A little bit
weird, but I guess that's fine.
>> It works better with the the MDF.
Whoops.
>> Oh, note to self that just broke.
>> Yeah, make the acrylic ones.
>> These are too small. Okay. Okay, we
learned something.
>> Well, maybe you don't be so gorilla like
with it.
>> Well, I think in the middle of a show
you might be gorillaike.
>> True. You know what? These totally these
would totally work if you did them too
thick. If you made them like too deep.
>> Mhm.
>> I think it will work.
>> Mhm.
Let me do it. Let me see. Let me test
this thing.
>> Okay, I got you. It's short. I see
short. I got it.
>> Short back there.
>> Oh, well,
>> concept is there. Medium.
>> We have a straight and a slant. That was
>> Oh,
pay attention, Kim. Oh, I see slant.
Mhm. So, so versatile. Hold on. I Hold
on. I moved it. I got it. I got it. I
got There we go. And then drop a smaller
front piece in.
>> So what is this? Based on the number of
peg boards. Yes, I see.
>> Based on the number of pegs.
>> Uhhuh. Uhhuh.
>> Mhm.
>> Then I have some just shelves. So you
don't have to put a front on them. Just
come in with just a shelf.
>> Oh, I see. They have So these little
guys have a little slot so it can be a
shelf. I got you. I love it. I love it.
We'll do hooks.
>> That's a shell.
>> Oh, that's a shell.
>> There you go. Hooks.
Large.
>> I got big hooks.
>> That's the same size.
>> Yep. Big hook.
>> Skinny hooks.
>> Small skinny hook.
>> And a tiny hook.
>> And I can hook these. I like how I'm
able to put these all over the place.
I'll hook it up.
>> All right. So, we've got
>> we got shelves, hooks,
>> cups,
>> shelf, hook.
>> Yeah, cubbies, shelves, hooks.
>> Good. Can I I've got some testers here.
>> Oh, all right.
>> He didn't know these were sitting over
here. So, all right. So, I've got my
little ornament kits from last year, and
I want to put those in here so I can
slide the divider that fits.
>> Yeah. I didn't want the divider attached
to one of these peg holes because we
have odd shaped things,
>> right? So, I got it. That keeps that
even more versatile. And then here's an
ornament hook. If you do hat patches,
here's a little thing for a hat patch.
>> Wow.
>> So, that can go over here or any of
these little
>> Yeah.
>> He said, "Hold on. Stop."
>> Yeah. Or put it on its side.
>> I can stand it up. Yeah. I can lean
something if we fill that gap.
>> Take that gap out.
>> So, I also talked about holding
stickers. Here are some stickers. I
could put these in these shelves.
Uh-huh. Make that the right size.
Whatever size I want. Again, these are
ornaments. I could hang these. We
already did those.
>> Pretend they're magnets.
>> Oh, magnets. Okay.
>> Well,
>> got to fix that.
>> I was think you could just lay them on
there.
>> Oh, right. I could just stack them on
the shelf if I want to. Here's more
stickers. So, I think that's everything.
I brought ornaments, ornament kits,
magnets.
I love it. I love it. And now, and I
like your I I like your foresight into
>> having different things,
>> two different signs. So, it doesn't just
have to be our logo. It could say
>> it could say magnets and ornaments,
>> sales. So, we talked about if you
watched our bundled and bankable, talk
about, hey, buy two get one free or
something some sort of discount you
could add. So, and these could change.
So, maybe for this show you do something
fun just for this show. Especially if
you can print something like on your
Yuthi, you can do all kinds of stuff.
>> Do a printed one.
>> Mhm.
>> All right. Well, I think we need to
attach the lazy Susan to these
scoremarked squares. We'll do this side
and the bottom side. I guess we're going
to stain it.
>> Yeah, that's what I was just getting
ready to say. So, before you do that, do
I need to figure out what how I'm going
to decorate it? I got to make it
beautiful.
>> Yeah, you have to make it beautiful.
>> All right, let me figure that out and
we'll be back.
[Music]
Hey,
hey,
[Music]
This is our ProColored VF13 Pro. This is
a UV DTF printer. So, we can UV print
with this printer, but we're doing it on
sticky paper or creating stickers or
transfers that we can put on. Yes.
Decals that we can put on pretty much
anything. Anything with a hard surface,
these decals can go on. And they're
perfect for these signs. Why I love the
Pro Color is because I don't have to do
anything to the image. I just load my
PNG and hit print.
>> Yes.
>> So, what sales do we want to be showing
today?
>> Don't make it weird.
>> Just get the bundle.
>> Are we bundling both? I like how
>> bundle like a boss. No, I like that one
with our little logo. That one's lets
them know we do workshops.
Why is it tighter now than it was a
minute ago? The sticker is not on it.
So, I think it's just the way you're
putting them in cuz they weren't like
squeezed in there. I don't know. It's
just the way we're putting them in.
>> I think those holes just need need to be
just a a scooch bit bigger.
>> But otherwise, I am pretty happy with
this guy. I like it. I think it spins
beautifully. I think it's super
versatile. I think we hit all of Kim's
requirements.
>> Yes. Yeah.
>> Yeah. I'll make some adjustments for
version 1.2
and put this back out there. So, if you
want to cut this thing, you could cut
this thing. If you also just you don't
want to cut it, we could give you the
unfinished kit, too. It works for me. I
cuz I love this thing. I'm ready to
spread the joy and give one of these to
everybody.
>> But I am about out of time. I got to go
make a bunch more accessories for this
guy. I have so many more ideas now. Now,
if you want this file as part of your
subscription service, you can join our
Patreon membership where this is part of
that plus all of our SVGs. If you level
up to the master tier where we do more
business coaching, you also get
exclusive SVGs.
>> Oh yeah, there's over 400 SVGs up there.
I'm about out of time. Big thanks to the
Make It Mafia. We love you guys. That is
the best way to support this channel.
All you guys will have this file later
on today.
All right. I am super happy with this
guy. I got to do the bounce.
>> Oh no.
>> Yeah, we're going to try to balance this
guy.
>> Oh no.
>> I'm going to need some assistance from
my
>> my assistant. Can you hold the corners?
>> All right.
Ready?
>> No.
>> And
I'm in.
Can we spin it? Oh. Oh my gosh.
He's going to break it.