MY F81 M3 IS ALIVE AND I'M PUTTING IN A $5000 INTERIOR! (FIRST DRIVE)

Nour Hummadi
114 followers
15 Video Views·Jul 26, 2025
Insane amount of progress made in one video, none of this could have happened without my boy Nick and Evans help remotely. If you need coding services make sure to reach out to Evan below!
https://www.instagram.com/evangoyuk/
●My Ebay Store: https://www.ebay.com/usr/nadiautoparts
● Merch: https://NADIPERFORMANCE.com
● Follow our Instagrams:
-Nadiautoparts: https://www.instagram.com/nadiautoparts/?hl=en
-Nour_hummadi: https://www.instagram.com/nour_hummadi/?hl=en
-Weekzwhipz: https://www.instagram.com/weekzwhipz/?hl=en
----------------------------------------------------------
SPONSORS! (CODE)
KiesMotorsports NOUR5
BurgerTuning
FCP EURO
AzaAutoWheel
Suvneer
SSR Performance
----------------------------------------------------------
So, for those of you guys who have not
seen the last video, we started an F81
M3 project. Pretty much this entire
build series is fully documented on
YouTube on converting an F-31 into an
F81 M3 from literally the ground up from
interior to drivetrain to body to
literally everything. In the last couple
of videos, we did get the entire
drivetrain fully assembled, fully
serviced, and inside of the F81. It's
crazy to say it's officially an F81 M3.
Um, we also ended up sourcing a lot of
other parts that's needed for this
project. end up getting my boy Nick that
flew over from Denver in the last video
and you guys were able to see um him
actually starting the coding process and
actually started doing all the wiring
because honestly a project like this
will never be complete without the
proper wiring needed to get everything
to work properly. I'm able to fully
assemble everything, but if it wasn't
for my boy Nick guys, literally the car
would not be as far as it is today.
Today's video is getting it to run and
drive. What's up, guys? Welcome back to
another video with the F81. We're
finally going to be getting this thing
started and hopefully out of the shop. I
haven't heard this thing start up just
yet, but we're almost there. Nick
literally just finished up all the
wiring. So, he finished actually getting
all the wiring over here situated. We're
getting the brakes bled right now. Uh
looks like we actually have a slight
leak there. Hopefully that doesn't
affect the connections. Oh, dear God. Uh
we'll sort that out in a little bit.
Probably soon. But anyways, uh other
than that, we're going to be fully
assembling this engine bay, putting in
all the coolant stuff, which pretty much
just the expansion tank, bolt on the
headlights, get some wheels on this car,
and get a full interior that you guys
are going to absolutely love in the
inside of this F81. And I'm officially
going to be able to say it's an F81
because the full drivetrain is F80. So
that's pretty sick. It's pretty sick. So
without further ado, let me go ahead and
show you guys the last couple of things
that we're buttoning up before getting
it outside, taking a few pictures, and
getting the whole interior in this car.
Hopefully driving
[Music]
Isn't you?
[Music]
[Music]
So, just like that, guys, we got the
heat shielding down there. We got our
brackets. We're about to slap that on
with our exhaust system. But, let me
show you guys something that's pretty
sick. So, right over here, guys, is the
wheels that we got from another M4.
These are considered the M Performance
wheels. Um, they literally say M
Performance right over here, which look
pretty dope. Um, one of them were
damaged with one tire that was damaged,
but the rest of them are good 2024
Michelin tires with some CS wheels.
Technically, these are CS's, but if you
get them on a regular M, they they're
considered M Performance, I think. Let
me know down below if I'm saying that
wrong. But anyh whos, we got some CS
wheels technically from the factory. And
I actually ordered the fourth wheel.
It's already here. I'm just waiting on
the Michelin tire so we can match the
set. So, in the meantime, I have this
ugly um not ugly, but regular M wheel
Michelin tire. We can get the car
running and driving today. That is the
goal. And I did get the rest of the
hardware and bolts to get the exhaust
bolted up. So, without further ado,
let's go ahead and get the wheels in the
shop and get all those bolts and get
that exhaust mocked up.
[Applause]
[Music]
[Applause]
[Music]
I already know getting these brackets
and getting this exhaust up here by
myself is going to be a pain in my butt.
So, I'm going to go show you guys with
the magic vanity and the luxury of being
at home and not here right now. This bad
boy instantly installed.
[Music]
So guys, we literally got everything
assembled on this car. You guys, check
this out over here. The braces are
officially on there on both sides. The
whole exhaust is on there. And because
of our donor, thanks to our donor, uh we
were able to get all the brackets we
needed. Even the shielding was
apparently different. So, we transfer
that over. It was only three bolts.
Exhaust is mounted up. Literally,
everything is connected. Let's go ahead
and see if this bad boy will turn over.
We got the brakes bled. Shout out to
Erlon for that. We also got coolant in
the system. We are pretty much uh we are
pretty much bleeding everything right
now. And we're going to finally start
this up for the first time. I can barely
breathe cuz we're trying to rush and do
everything real quick and get this thing
started. Fingers crossed. Literally all
the wiring is connected now. If this
doesn't start, I don't know what we need
to do to get this thing to start. So,
anyhoos, can't wait. I'll show you guys
here in a second. Just have to do a few
more things in the computer. Nick is the
the legend. I'll keep you guys posted.
Nick is officially going to be starting
this thing. So, I guess Oh, should we
actually put the caps on?
Better safe than sorry. All right, bro.
Moment of truth.
You got to you got to do the key
framatic.
Well, it may not start.
No lights, no nothing.
Yeah, the negative's on there.
Positive's on there. All right, guys.
We're going to put the jumper on here.
Car completely died while uh you know,
running the water pump and the bleeding
and all that stuff. So, let's see if the
car will start up with a proper jump.
Okay, here we go. Heard some sounds.
That is one good engine, guys.
Hold up.
This is fuel.
Yeah, fuel.
All right, guys. So, the car did start
up. Uh, but unfortunately, we do we saw
a little bit of gas spill out. So, let's
go ahead and figure out what we didn't
tie in exactly. And then, uh, we'll go
ahead and crank it up again. But, it
sounded really, really, really good. So,
what you guys didn't see is the engine
actually started rocking back and forth,
which actually really scared all of us.
We didn't know what was going on
exactly. It kind of sounded like a
knocking noise, but it sounded like it
was knocking something with the chassis.
Turned out to be the transmission not
completely mounted properly. So, that
was fine. But we also were trying to
figure out why we have a fuel leak. It
was kind of leaking from a few different
places after even tightening it. But
thankfully after kind of running the car
for some time, it looks like everything
did kind of fix itself. And then also at
the same time, the smoking issue is not
that big of a concern because for those
of you guys who have never replaced a
valve cover, when you replace a valve
cover, it is normal to actually have a
little bit of smoke. It's just the
excess oil just kind of burning off.
All right, guys. So far, it's running.
We're testing uh brake pressure and in a
little bit here, as long as this thing
stops smoking and we don't have any more
fuel leaks, we're going to probably put
the wheels on the car, slap the interior
in the car, and drive it out of here. We
got this engine from Red Car, so we
weren't able to actually start it. So,
seeing this thing start for the first
time, it's pretty sick. Pretty sick,
especially after considering how much
maintenance we did to it. So, let's just
stick to the positive side right now.
The car is running, which was a huge
plus. We did run into a few hiccups, but
that is to be expected when doing a
custom project like this. So, we went
ahead started putting on the wheels on
the car, started checking everything
over and over and over to make sure if
this car is actually safe to drive, even
front and back, because we don't want to
mess up anything and cause a
catastrophic engine failure. Uh, but
thankfully, so far so good. We did prime
the engine. The car is running. Um, it
sounds healthy. So, let's just go ahead
get this thing on the ground and
hopefully actually drive it. Uh, we are
right now, what is it? 7:30 right now.
8:00.
8:00 our time. Uh, we called Evan. It is
11:00 his time. Shout out to him for
picking up the phone. I know. I would be
asleep right now. This car is pretty
much ready to pretty much get out of the
shop and uh you know, just finally get
our thumbnail, see if the car actually
runs and drives. Uh so again, huge shout
out to Evan. Hopefully the only thing it
needs is for it to be coded. Um and then
once the transmission is coded to the
keycast DME so that the actual computers
can recognize the new transmission, um
theoretically we can drive it around and
actually do our further testings on the
car. For those of you guys who need
anything BMW related in terms of coding,
programming, um or even again
transmission swaps and you guys need
coding for that, make sure to reach out
for Evan. His information is going to be
linked down below.
Guys, I'm just taking a second to admire
it. This thing is looks absolutely
insane. And I'm just super happy that
even after that scare, things are
looking good.
I need to be your IT person and hook up
all your shops with blazing fast
internet so we're not doing this
We need to get this to the other shop,
guys. We have no Wi-Fi here. He's
literally trying to get better
connection right now.
[Music]
All
[Music]
right, guys. Shout out to Evan. He's one
of the few people that I know that can
actually He's the only person I know
that can actually code this thing, the
new transmission to the car. So, let's
go ahead and see. Will it drive forward?
We are running out of sunlight. You
ready, Nick?
Allegedly.
Alleged. We're having a problem with the
key. Started right on up.
We're going to drive
and we're rolling.
And just like that, guys, we have the
F81 M3. I can finally officially say we
have an F81 M3 because at this point,
guys, it is a running and driving F8 M3.
Huge shout out to Nick, bro, because
honestly, if it wasn't for him, guys, I
could put a drivetrain in this car, but
it will definitely not run and drive.
And I cannot believe it's out here right
now. We have the full Sakira red
competition extended leather, sun shade,
front heated, rear heated, full package
interior. We're throwing it into this
beast. It's going to be so so so sick.
So, without further ado, guys, it is
what, like 9:00 right now? Yeah, like
9:00, guys. So, uh, yeah, we're not
going to go ahead and conclude the day
just yet. We want to slap this entire
interior in there. So, uh, wish us luck.
I think it's going to be a late night
tonight, but we are super excited.
[Music]
So guys, we drove the car back in here
because we actually can, which is super
crazy. And we're getting the interior
together as well. This car has extended
leather, the sun shade package, which is
super dope. We got the rear seat bench.
This seat bench actually is heated, and
the car already came with equipped with
heated rear seats. So, that buttoned up
really nicely. Got this door panel, got
the dashboard. Finishing up this whole
side of the dashboard right now. Cannot
wait to see all the accessories, the
carbon trim, all that stuff go on the
car. Guys, this thing look absolutely
insane. And we're also going to be
swapping out the seat belts uh because
we have F80 Competition. I can see the
stripes right there. Competition OEM
seat belt. So, might as well we have the
seats out to actually swap those over,
which is super sick. So, like I said,
guys, zero expense spared on this car.
It is a fully fully loaded with a bunch
of M performance and OEM parts and even
OE parts like that, like that key fob.
Me and Nick are honestly stupid tired
right now. Um, but we still want to
finish a little bit more. We want to get
both seats in the car, seat belts in the
car, and I think that's pretty much a
stopping point. As soon as we get both
seat belts and both seats in the car, we
can test out the seat lights because
Nick also wired those in as well. Again,
huge special shout out to Nick. This car
would definitely not be where it's at
today or even honestly built if it
wasn't for him. So, shout out to him
coming out. He's literally dedicating an
entire week to this car. And you guys
saw in the last video that I literally
left him here for like a couple days for
like 10 12 hours, which I kind of feel
bad about, but he had to stay here to
get the work done. This shop literally
has no AC, no heater, no water, no
bathroom, no nothing. So, the dude was
struggling, but he made this dream come
into a reality. So, huge shout out to
him. Without further ado, guys, let me
go ahead and button this up so we can
get this interior together. Look at that
bad boy. Look at that competition seat
belt. So, guys, this is the next day of
actually working on this car. So, you
guys saw yesterday we stayed super late
night. Honestly, we didn't get any
filming done cuz we're working outside.
Um, but again, shout out to Evan. Can't
thank him enough. He honestly came in
super clutch on this car. Again, I don't
even know how this car would have been
driving if it wasn't for him. But if you
guys check out the interior, Nick has
been going to work. You guys see the
interior in this car. We got the
extended leather of the dashboard in the
car. We got the steering wheel. Uh we
got the cluster. It looks like I mean
this thing will be pretty much assembled
here pretty quickly. Uh shifters and
everything are going in. Seats are in.
We do need to replace the driver seat
buckle. That one is blown, but not a big
deal. Rear seats are in. Uh we just
don't have the rear section. We got to
figure out how to retrofit that again.
Rear door panels in. Long story short,
guys, this thing is actually coming
together pretty quickly. Put on the
stock F-30 wheels on this car. mainly
because these CS ones are rubbing really
really really bad and it's kind of like
mark it's marking up the tire. We don't
want to damage these tires. Very
expensive tires. So, that being said,
I'm going to go ahead and follow Nick.
He's going to be driving the F8.
Actually, can I drive the F81 or you
want to drive it?
Oh, I don't care.
Okay, I'm going to drive the F81. I'm
going to have I'm going to have him
follow me in the uh Tesla. And I want to
drive this thing for the first time to
the other shop and see how it drives.
Let's see if all this work was uh I
mean, we can't we can't we can't judge
the car too soon, but I just want to
drive the car. Let's go ahead and hop
in, drive it through the shop. Nick's
going to do a lot of coding to the shop.
It actually has Wi-Fi over there. And
I'm actually going to continue to uh
build this thing cuz we have a lot of
parts at the other shop. Anyways,
anyways, no more talking. Let's go and
get you guys a startup and take it to
the other shop.
That is an S55 right there, guys. That
is not an N20. It sounds insane. It is
completely stock right now. We are
missing intakes and a bunch of other
stuff, but uh so far so good, guys.
Also, earlier, uh, Erwan swapped out the
valve cover on this thing. It was making
a really weird noise. Um, and we already
swapped out the valve cover originally,
but it turns out the one we swapped it
out with had a bad PCB, so it's making a
really weird suction noise. Long story
short, Erlon came through this morning,
swapped out the valve cover. We are good
to go on that. All right, let's go ahead
and take on his first test drive over to
the other shop. Thankfully, it's
literally 2 minutes away, so hopefully
we're not going to run into any issues.
Guys, first time in the driver's seat.
Look at that M3 cluster. You know what's
crazy is my E91M3 also has 121,000 mi.
Both these builds have the exact same
mileage, which is pretty crazy. Look at
that beautiful extended leather. Oh my
god, this thing is so sick. Plus, guys,
we got every option you could think of.
I think it's only missing one other
option. Even heads up. Oh my god. Okay,
let's put it in drive. Let's drive this
thing out. Okay, we got to drop the E
bra. See if it rolls forward.
Okay, and we're going. We're going.
I cannot believe we're literally driving
this car last week, guys. This thing was
on bricks. Sh. I wish I could zoom out
more. This is crazy. Surprisingly, the
alignment is not that bad. I didn't even
I didn't even do any alignments on this
car, but I'm sure if I hit the freeway,
it' be absolutely crazy, which we're not
doing. But not bad. Not bad.
[Music]
Oh, it's the new wagon, baby. Where's
the rest of the boys at?
That's crazy for other no posters just
yet, but check this thing out, guys.
Sheesh.
E91 M3, F81 M3. This thing is crazy,
guys. Check out the interior. Look at
the interior of this thing. Something
something.
We'll get it later here in a little bit.
We're going to do some coding. I'm going
to assemble more stuff in the front end,
but check out that interior, bro.
Oh, man.
Damn.
Oh my god. So, right now, guys, we're
about to pull around to the back, get a
little more coating done on the car. We
actually have another F82 in the back.
It's going to be helping us assemble
this whole engine bay. So, me and Nick
are about to go ham right now on this
thing, which is going be pretty crazy.
But, I just can't believe it's driving
right now.
Bro, this thing is going to be fully
assembled here in a few hours.
What the freak?
Isn't that crazy? This
is insane, bro. That's crazy. Doing
Alberta. Alberta.
Oh, heck no, bro. We got so much more
work we got to do first. So last night
guys, we were a little bit rushing to
get this interior together. So we
actually have to remove the center
console to put this thing back in. Once
we actually put this thing back in, I
can actually fully assemble the center
consoles and look so freaking good. So
let's go ahead remove the center
console, remove everything here again,
and then reassemble it to its
completion, which we haven't got to see
so far.
[Music]
Guys, we got carbon on carbon on carbon.
The nice thing here at Natty Auto Parts,
guys, we actually had an M Performance
shifter. You guys can see the wear and
tear on this one. We had a better one in
stock, so I went ahead and swapped that
over. So that is super sick. We got
carbon right here. Carbon right here.
Carbon right here. And this bad boy is
just more carbon. Let's go ahead and put
this on right now. Easy peasy lemon
breezy.
I mean, at this point, I want to put the
rest of the stuff together, but Nick
still needs to do a few more wirings
over here for retrofitting a newer
version of the MVT system. Um, I forgot
what it's called exactly. I'll show you
guys the interface once we actually get
installed. But Nick really likes to make
things fully loaded. So, this car, as
you guys can see, with every option over
here that's actually functioning from
360 cam to EDC to steering assist to
everything here is working. You even got
this wired in as well. All these were
originally on this wagon and this wagon
came with heating steering originally
and so now it has heated steering which
is super sick. So, yeah, this thing is
really coming together.
[Music]
Heat. Heat.
[Music]
So guys, this is the next morning. We
pretty much went home a little bit
earlier yesterday around 8:00 p.m.
instead of 10 or 11. And that's because
honestly, guys, a week of working on
this car non-stop definitely gets you
burnt out. But the amount of progress we
made is absolutely insane. Currently,
Nick is actually going on a flight
today, leaving around 400 p.m. So, he's
actually still trying to knock out a few
more things before he leaves. And that
is our LCI tail lights. The outer ones
just need to get repinned, but the ones
for the hatch need some special wiring,
some pin outs, a new connector, a bunch
of stuff. Long story short, he knows I
can't do it. So, he's over here trying
to knock it out. So, shout out to him.
Um, but anyh who, he's about to get that
stuff done. And hopefully all of our
tail lights will work. And then our
mission in the next month probably is to
get this thing fully converted and
probably fly him back out here to kind
of do the finishing touches and get all
the electronics to finally work
perfectly. But the way the car sits
right now, guys, it is a running and
driving F81 M3 and we just need to get
it fully assembled. That is that is
honestly super good news. And this car
just a week ago was on four brakes.
Would not start, would not drive, zero
signs of life. It's insane how far it's
come, especially now with the full
interior. It's absolutely insane. Yeah,
bro. for I'm pretty sure everyone that's
watching this video has been wanting to
see this car come together. Um,
appreciates you. So, we're going to This
is from the team.
Oh,
But, uh, all right, guys. While Nick
actually works on the trunk stuff again,
I would show you guys what he's doing,
but I I it's just more wiring, guys. We
got Where's those two connectors? You
know where they're at? I'm going to show
the connectors for those of you guys who
are wondering what we bought. So, yeah,
that's the part number right there for
those of you guys who are wondering
which which clips these are. Uh, but
yeah, we got these two blue clips.
They're going to be swapping these out.
There's going to be some new wiring
being added. There is actually a
retrofit online that you guys can
purchase. We just ended up going with
the factory clips. Like I said, Nick's
gonna rewire it. Again, if you guys
don't want to do this full conversion
you guyselves, you guys don't want to do
LCI tail lights, you think this is a
little bit out of your element, such as
myself, uh, make sure to reach out to
Evan. His information is going to be
linked down below. He can help you guys
build an F-31 M3. It is not the cheapest
thing in the world, but obviously an F81
M3 is a super rare car, and it is
something that is definitely sick to
have. But without further ado, guys, uh
let's go ahead and start reassembling
some more engine based off he works on
that because we don't have much too much
more time before he's on his flight.
[Music]
[Music]
So guys, after installing a bunch of the
metal that's in this engine bay,
thankfully a lot of the things line up,
but also a lot of things are going to
need to be fabricated. So, as you guys
can see over here on this brace, there
is one two strut holes that are not
drilled out, but will match up with the
F80 shocks. Thankfully, the F80 shocks
do match up with the F-30 ones. Even the
guide pins, I don't know if you guys can
see it, but right over here, it matches
up. So, honestly, it's not a big deal.
Again, you can run and drive the car
like this, perfectly fine. But if you
want to honestly get the two extra
screws right there, um you just need to
drill that through. Take out the shock,
drill that through, and then reinstall
the screws. Those are the easy ones.
Now, this one right here, um, doesn't
it's supposed to have a screw that goes
in here. Unfortunately, uh, it's just
hollow. So, you probably need to rivet
something over there. Um, these line up.
These bolts in, that bolts in, but this
is supposed to mount to the chassis. On
the F80 is an actual stud coming out.
Um, so yeah, we need to actually weld
something there or again rivet something
to actually hold this down so it serves
its purpose. But other than that, this
mounts up over here and mounts up up
over there, mounts over there. The
carbon strap brace now can mount as
well. And if you guys look over here,
the expansion tank is finally mounted
onto this brace, which is one of the
most important things, which is why I
actually have this right here, because
this thing is a really tight fit. And I
don't want the heat to mess this up or
the heat from this to mess anything else
around that. So now it's looking
absolutely perfect. Let's go ahead and
put on the brace on the other side. And
honestly, guys, we can start test
fitting the carbon brace, which would be
absolutely insane.
[Music]
And just like that, guys, the carbon
strut face is installed on the car, not
moving. I can literally shake this
entire car with this bad boy on. So, we
got this mounted. These bolts actually
all mounted up as well. So, we had to
obviously install this to install the
carbon shrut brace, but we also had to
install this um because the thread is on
the bottom um in order to screw these at
least these two in, but you probably
need this for the carbon strut brace.
So, long story short, this is needed um
to bolt the carbon strut brace all the
way. Um but long story short, that we
still need to figure out a way for that.
This is not that big of a deal, but
primarily that right over here, this
bolt is a little loose. I think it uh
this thing is stripped, unfortunately.
Um, so we'll have to uh swap out that
expansion tank later. Not a big deal.
Um, for now it works. Um, this side
right here, again, everything's the same
way. Everything's hooked up. Shout out
to Nick for the EDC sensors. These thing
looks absolutely amazing. So, yeah,
guys, just like that, this engine bay is
pretty much complete. I just need to
route uh what's it called? Hood latch
cables. We need to mount these
headlights once we figure out what's
going on with them exactly. We're having
a little bit of issues with the
headlights cuz we are retrofitting it
onto the F30 wiring. Um, and then
honestly the two cowl pieces, the hood,
and this engine bay is done. Obviously,
we need to put on fenders and fender
lines and whatnot, but this engine bay
technically is fully complete. And we
were able to knock this out in one
weekend. Shout out to my boy because I
honestly can't believe this car has been
sitting in the other shop for 8 months,
guys. And it's looking like that. That's
the second wagon we built now. And this
one looks even better, to be honest,
than the S65. The S65, I mean, you have
to love that in a completely different
way. But I have a feeling I'm going to
love this in a more luxurious way
because that interior is just insane. I
mean, guys, just take a look at that
competition. Red extended leather. This
thing's just absolutely stunning. So, I
think Nick already finished buttoning up
the whole trunk area. Almost done,
actually. Um, this whole section's done.
He pre-wired. Uh, he actually ended up
wiring the LCI tail lights. Uh, and I
mean, it's looking good, bro. Good
stuff. Good stuff. Appreciate you.
Okay, the internet is not lighting up
yet. Maybe they don't normally.
Okay, so yeah, they're all working right
now.
Yeah, brakes work. Reverse lights work.
Uh, turn on turn signals.
That one's working. Yes, sir. They all
work. God bless. Even reverse lights
work, guys, which I thought was going to
be the hardest thing, but honestly,
looks insane. Ooh, this thing has soft
clothes.
This is soft closed because of the power
tailgate.
Ah, nice, nice, nice. You guys saw that
power tailgate. E91M3 doesn't have that.
I don't even know if Can you retrofit
that on a E91?
It's probably a little too much work for
that, huh?
You basically probably take an F-31
system and probably drill into the body.
I mean, you probably could,
but it's not worth it.
Maybe it's probably not.
Yeah, fair enough. But yeah, that is a
super nice feature. We got the buttons
up here as well. I think this unlocks
the doors. So, when I have this on my
X1, so let's say the car is unlocked,
all the doors are closed, you're
grabbing stuff out of the boot, you just
press this to lock the car, door close,
lock it, and then you do it.
Normally, it should lock. I think that
might be one of those little things cuz
right now the FM's coded as an M3.
Yeah, there there are some things like
this button right now is not working as
well. Nick got everything to work on the
E91 M3. This is eventually going to
work. It just needs a lot more
programming and more wire potentially.
It's probably just coding, right?
Just coding.
Yeah. Yeah. And then everything's going
to work. But at least that right now,
the trunk opening and closing, which is
super sick. I love that. It's done. Tail
lights are done. Guys, Nick, check out
this engine bay. Bro, look how gorgeous
this thing is. It's fully bolted up.
Carbon strut brace.
Damn.
So, the only thing unfortunately uh
underneath this screw the where it
mounts is stripped. So, we don't have to
replace expansion tape. I put a
different size bolt just to hold it in
there.
stripped
the where it goes into. Yeah, it's like
corroded. It's like coolant kind of mess
up the whole hole if that makes sense.
Well, good thing the M4 parts car has
beautiful.
So, we'll probably end up swapping that.
I do have to dump the coolant
unfortunately to do that. But, um yeah,
anyways, right now it's looking
phenomenal. Uh at this point, I don't
know if I'm dropping off Nick right now
at the airport. We're going to do a
little bit more coding, but I'll get
back to you guys when we figure that
out. As of right now, guys, amazing
progress. Cut back to you guys in a
second. So, guys, we're at the end of
the video. I'm not currently at the shop
to show you guys the F81M3, but we made
insane progress in this one week alone
with my boy Nick. Shout out to him,
guys. He's been telling me to come out
for months now. But honestly, guys, I
was a little skeptical on how fast we
can actually knock out this car. So,
when he said we can knock it out in a
week, I didn't really believe him, so I
kept on pushing it off further and
further and further. And honestly, guys,
this dude's an absolute legend. We
literally got this thing running and
driving in literally a few days. Now, at
this point, he's just perfecting the
car. And hopefully the upcoming videos
on this build is going to be getting
this thing ready for Beamer Invasion,
which is pretty much only one month
away. I'm not sure if the next video is
going to be a McLaren update because we
did get an update on the McLaren. I want
to get a little more information,
potentially even the keys in our hands
before giving you guys the final results
of what's going on with that car
exactly. So, the McLaren update is going
to be here pretty soon. If not that one,
if there's still a delay going on with
that, then I'll get you guys an F81 M3
update. Hopefully getting some more
parts on that car together. And for
those of you guys who are local to
Sacramento area or even California in
general, we're having a car meet at
Natty Auto Parts. Going be showcasing
both wagons, some supercars, and a bunch
of good vibes with a bunch of good
people. Make sure to come out August 3rd
at Natty Auto Parts. It's going to be
super fun and I'm going to show you guys
a few things on the wagon on that wagon
before we actually get on to the video.
So, for those you guys want a little bit
of a sneak peek to see both wagons in
person, make sure to come through.
Without further ado, guys, going to have
to conclude the video. I love you all so
much. Remember to stay humble. See you
on the next one. Peace out. Yeah. Let's
see how you doing. The pressure. Oh
yeah. I've been wanting this forever.
I've been in the field with whatever
they throw at me. Brush it off. Pick
myself up. Moving on to the better.
