How to Back Up a Snow Anchor for Crevasse Rescue

Memories Transcend Time.
11 followers
14 Video Views·Jul 24, 2025
Learn how to equalize tension with a primary and backup snow anchor using a block & tackle. Instruction from the American Mountain Guides Association
Hi, I'm Larry Goldie, a member of the AMGA instructor team. Today I'm going to talk about
backing up a piece of snow protection that you place in order to execute a crevasse rescue.
Okay, so at this point I've transferred the load onto the first piece that I placed while I was
down in self-arrest. Because I was in self-arrest, this might not be the best picket I've ever
placed, so I want to back it up before I try to start hauling. So it's holding the load for now.
So the first thing I need to do is get a little more rope so I can move around here.
So I'm going to put a prusik onto the rope so I can drop some coils. At this point I have a prusik
on here so I can come out of here and I'm still going to be backing up this piece. If this piece
were to fail, I need to be the backup. And if I don't have a prusik on and I just open up all my
coils, that would be bad. Now I can give myself a little more room and try to stay tight on this
prusik so I could self-arrest if necessary. Now I'm going to get another picket to back up my first one.
Slowly move uphill. My first picket. I want to get in some fresh snow.
So in order to equalize these two pieces together, I'm going to use a block and tackle.
So I start with a cordelette and I clip one end into my new piece. And then without opening this
carabiner, I'm going to run cordelette through my original piece. And now I've created a block and
tackle. I can pull some tension on here so that the good piece I placed is holding a good amount
of the load, at least half of the load. And then I'm going to tie this off with a mule. And now I've
equalized my two pickets together so I can now continue with the rescue.
