Jungle Aquarium Plant Ball Terrarium (DIY Wabi-Kusa Tutorial)

Mini World Craft
6 followers
39 Video ViewsยทJul 23, 2025
If there's one thing that I really enjoy which should be evident from the content that I produce
on the channel, it's that I absolutely love alternative planting methods. I'm absolutely
fascinated by it, and for me it's one of the funnest ways to create art, enjoy plants, and
bring nature indoors. Excluding setups for my animals, I don't always keep designs that I make
due to space and time restrictions. There are a few that immediately pop into my head though,
like the mini moss mountain dish. There's also the self-watering moss wall and the living brick to
name a few. Those and many others were a lot of fun. Another concept that I'd love to showcase
on the channel that would fit right in is wabi kusa. Now I don't want to bore you with the
details, but I should give a brief introduction for those of you unfamiliar with it. Wabi kusa,
in short, is typically a substrate ball which serves as a terrain for emerging aquatic plants.
Oftentimes they're kept under glass to facilitate optimal conditions.
In this way, we can think of it as a riparian terrarium of sorts. I've discussed riparian
plant growth in detail before, but what I'm typically referring to are plants grown in an
aquatic setting that are only partially submerged. This works with select terrestrial plants and a
vast majority of aquatic plants. We generally think of aquatic plants as just that, but the
fact is that most will readily grow out of water if conditions are favorable. Additionally, most
commercial aquarium plants are grown in their terrestrial form to expedite the process and for
easier transport. This is why a newly planted aquascape oftentimes melts away. In most cases,
the plants simply need to adjust to the environmental shift and will eventually
return in aquatic form. The same will occur if the scenario is reversed. This is all very
intriguing to me because I love to see how the plants look as they grow in different conditions,
and if you're already keeping aquariums, I'd highly recommend doing something like a wabi kusa
just to see what happens. Anyway, how should we go about making a wabi kusa ball like this one?
At its most basic level, this is just a ball of dirt wrapped up in sphagnum moss.
If we take a closer look though, it's a little more than that. The first and primary component
I have is aquasoil. It really doesn't matter which, as long as it's a soil-based mix like
this one. I've seen wabi kusa made exclusively with aquasoil, but apparently they're prone to
apart, which would make sense. To help bind things together, I'll include some coco fiber.
These alone may be sufficient, but I thought of another seemingly strange amendment,
clay cat litter. Now, I don't know if others have used it in this application before,
but it should really help bind things together. The reason I even thought to include this was
because of some vivarium builds I did back in the day. I didn't develop the idea, but you can mix
clay litter with other components like you'll see in this build to make a pretty decent background.
It's not a perfect solution, but it works because the litter is made from bentonite clay.
You could simply buy bentonite as bentonite to be more thorough, but this is an easy and cost
effective option. Anyway, if you were to use this, just make sure to get one that's made
from clay with no additives. If unsure, just look at the back of the package.
My thought process behind this, and hear me out, was from the perspective of a meatball.
We have the aqua soil, which is the meat, cocoa fiber, which is the breadcrumbs,
and cat litter, which is the egg. The combination of the three should make for a stable ball that
functions well. I went with three parts aqua soil, one part cat litter, and one part cocoa fiber.
I felt it would be easiest to hydrate the components individually, and then combine
them together. I'm sure you could do it the other way around though. I began with the aqua soil.
I combined it with water and kneaded it all together until it became the consistency of dough
or clay. I don't know the exact ratio, but I'd recommend starting with a little water
and add more as needed. I did the same for the clay. It requires much less water than the aqua
soil and will end up being pretty firm. From there, I pressed the aqua soil out into a thin layer.
I crumbled the clay evenly over it. Then I poured on the cocoa fiber and mixed everything together.
It will end up being pretty stable and hold up well when molded together. After all of that,
you can make the ball whatever size you want. Something around the size of a fist or smaller
is probably ideal though. For this build, I made mine around the size of a fist. You most likely
will end up with a little bit of excess. If so, just pop it into a zip bag and save it for future
builds. To give the ball more stability and to wick and retain water, I'll wrap it up in sphagnum
moss. I rehydrated it prior so that it's easy to work with. I also have some fishing line which
I'll use to wrap it up. It's best to use something synthetic for this part like fishing line so that
it doesn't decompose. Otherwise, the ball would likely fall apart long term. Anyway, I put down
a bed of moss over top of a piece of line. I placed the ball onto this and began wrapping it
up. I pulled it over the ball the best I could and tied the line in the center. I repeated this
over and over again to stabilize the moss. After all of that, I tied off the line and removed the
excess. You should end up with something that looks a little like this. It's pretty easy to
do and doesn't require a lot of materials. Alternatively, you could buy a pre-made Wabi
Kusa ball or modeling substrate to speed up the process. You should know I like to do things on
this channel though and I find it a lot more enjoyable to go the DIY route. This is my take
on it though so feel free to experiment with the blend and different things like that to find a
mix that works best for you. With that addressed, we can finally move on to the plants. As I said
earlier, aquatic plants are what are traditionally used and it just so happens that I have some
immersed growth here that needs trimmed. This tank, for example, has some Hygrophila corumbosa
that grew right out of the top. You'll notice that it has some flowers on it as well. That's
pretty awesome. I also have Alternanthra dentata in this tank. To my knowledge, it isn't an aquatic
plant but it needs trimmed so why not include some. I trimmed the plants just above the water
line so that more immersed growth will occur in no time. For now, I placed the trimmings in a cup
of water so they don't dry out. I went around my tanks and pulled additional plants that I felt
would complement the ones I just trimmed. In addition to those, I also have some tissue cultured
plants. These will work great for a build like this since they were grown in terrarium-like
conditions. As such, there will be minimal acclimation die-off provided the humidity
is kept high enough. We can't create a proper Wabi Kusa without some moss. Now, depending on
how you decide to keep it, you have some options here. In my case, I'm going to have it fully
immersed so I can use whatever moss I want. If I could make a suggestion though, thread moss,
fern moss, and badge moss are a few that would work exceptionally well in an environment like
this. That said, if you intend to fully submerge your Wabi Kusa, you probably want to stick to
aquatic species like Java moss. Some terrestrial mosses will transition to aquatic environments
but it's not always a successful endeavor. Anyway, I kept it simple for mine and went with a mix of
I use this to cover the majority of the ball. Something to keep in mind though is that the very
bottom of this is going to be pressed up against the container so you're not going to need moss
for that area. It will also spread over time so if you only have a little bit to work with, just
loosely spread it around the top. I have a decent amount for mine though so it's going to cover the
vast majority of it. For good measure, I secured it with more fishing line. In doing so, I used as
few wraps as possible. This is a good time to say that you probably want to have a sprayer or bowl
of water on hand. That way you can keep the ball hydrated during construction. At this point, we're
going to start adding the plants. The whole process will be made much easier though if you have
yourself a pair of tweezers. I prefer ones that are pointed like these because they're less intrusive
and for me at least, easier to use. As with pretty much any build, I always like to start with the
largest elements. So in this instance, that would be the alternanthra and hygrophila. I'll plant these
near what will be the back side of the piece. To do this is quite simple, especially if you have
pointed tweezers. What I did was create pockets with the tweezers that the plants can nestle into.
This way, the roots won't be excessively smothered by the dense substrate and they will stay upright
from the start. Eventually, they will grow into the substrate ball but if I just jam them into it,
it would most likely smother the roots which wouldn't be optimal. I had to clean the tissue
cultured plants off before use. They're grown in a gel that we don't want in the system.
It's easily removed by just pulling it off in water. I also gently separated the plants so
they're easier to work with. I added these the same way I did the previous plants. As they grow, these
crypts will really fill in the foreground. With this in mind, I planted them in a horseshoe shape around
the background plants. I think the hydrocotyl is best served as a mid-ground plant as well.
From there, I used the echinodorus to transition into the foreground.
To finish it off, I filled in various areas with the baby tears.
With its fine textures, this really brought everything together and made things look wild.
Here's the result after all of that. I don't know about you, but I think it looks pretty cool.
It certainly has the vibe and essence of a terrarium or jungle aquascape, but there's a
unique life all its own. The cool thing about making these is that it gives you a lot of
creative freedom. You can combine several balls together to make a little landscape
or even use them to plant an existing tank. For example, if you have a hardscaped enclosure,
you can make a few of these and situate them in appropriate locations instead of planting directly
into a substrate layer. This makes it easy to adjust designs or move things from tank to tank.
They can also be used to easily make a riparium or paludarium style setup.
Just take advantage of the hardscaped elements and situate them right below the water line.
I'll show you more about that in future videos, but for now, I need to select a proper container
for this, and once again, there's a lot of options to choose from. It will all vary depending on
what plants you've chosen and what condition they're in whenever you set up the Wabi Kusa.
For example, the tissue culture plants will have the best chance of success if kept in a humid
environment. So for this build, it makes sense to use something with a covering that will retain
humidity, at least initially, and I can dial it back the longer it's set up. Here are a few examples
of things I could use. Jars like a latch top or cork top will work fine, especially if you want
the ball in a completely sealed environment. For a more refined look, you could go with a cloche
style container like this one. Another option would be a larger container like this where you
could eventually fill it up with water to submerge the Wabi Kusa. For mine, I've decided to combine
two different containers. I took the base from a cloche that just so happened to match up with
this piece. I like the combo because it gives the look of a cloche while also having an opening on
the top. As such, I can easily adjust the humidity and switch from a sealed to open container with
ease. Either way, the main consideration is the dish on the bottom. This could be something as
simple as a soup bowl or whatever else you have lying around. The dish will be filled with some
water that the sphagnum moss wicks up. As such, it will keep the plants well hydrated at their roots.
Keep in mind though that the system needs to be topped off periodically if it's open.
You may also need to spray the plants every now and again, especially if they're in an open system.
Another layer that you could add to all of this is a little bit of hardscape. Elements like driftwood
or stones could be included for additional interest to your little world. For mine, I really
don't have much additional space to work with other than the vertical area, so I kept it simple
and stuck a few pieces of spiderwood into the ball. I also included a very thin layer of sand on the
creativity in this realm and bring nature indoors. In my opinion, it's closer to a terrarium than
anything else, but making one is much different. If you enjoy plants and like making art, I
definitely recommend giving it a try. They're not very difficult to make and require minimal upkeep,
especially in an enclosed system. Not only that, but the imperfect jungle that will eventually
take shape is what it's all about. These are not intended to be immaculately scaped and designed
enclosures. They should in some ways reflect the ephemeral chaotic nature of life itself,
which is interesting if you really think about it. If you're still on the fence about bringing
nature indoors but are seriously considering it, this might be a good place to start. With that,
keep in mind that you can use terrestrial plants as well, which may be easier for you to obtain.
If not, maybe a more traditional closed terrarium is the way to go. I don't care either way. All that
I can say is that there's so much joy to be had in this sort of art form. I could go on and on
about this stuff for hours, but I think that's a good place to end it. As always, I really hope
you all enjoyed the video and learned something new. Let me know what you think about it down in
the comments, and until next time, SerpaSquad, take care and peace!
