Nanbu Tetsubin: Cast-iron Kettles and their History, Use, and Care

TEA & Stories
20 followers
3 Video Views·Jul 13, 2025
Tetsubin (鉄瓶 - cast iron kettle) are beautiful ways to heat water. Here I discuss the difference between 'real' tetsubins and the more common mass-produced 'cast-iron teapots', as well as the history of tetsubin, how they're made, how to use them, and how to take care of them.
00:00 - Kettle not Teapot
00:57 - History
03:08 - Effects of Iron
03:41 - How they're made
06:22 - Heat Sources
06:58 - How to Use
09:25 - Teatime!
10:52 - Sayu
11:17 - Back to Teatime
13:05 - How to Care for Tetsubin
14:30 - Rust Mitigation
16:18 - Final Notes
Today I'm going to talk about tetsubin.
What is a tetsubin you might ask?
It is an iron vessel, otherwise known as a cast iron kettle.
You might have seen things that look like this in tea shops and cafes, but the first
thing I want to make clear is that a tetsubin is a kettle, that is a vessel for boiling
water and it is not a teapot, that is a vessel for steeping tea leaves in hot water and then
pouring that out into cups.
This might be confusing because most of the cast iron kettle shaped objects you have seen
are probably teapots.
They have an enamel coating on the inside that makes them neutral and also means that
they can't be boiled on the stove and those are designed for steeping tea, not for boiling
water.
A real tetsubin is for boiling water.
With that out of the way, let's talk about these wonderfully crafted cast iron masterpieces.
While handled and spouted kettle shaped objects were used in Japan since the 1300s, or probably
earlier, the cast iron pieces that we call tetsubin weren't developed until the late
Edo period, sometime in the early to mid 1800s.
They were developed as an offshoot of the kama, that is the kettle used in the tea ceremony.
One of these.
A kama.
To use a kama, you need a bamboo ladle, or hishaku, which complicates things.
So a spouted version is a lot easier to use, especially for a beginner.
Though originally developed as tea ceremony utensils, they quickly became popular to be
used in homes as everyday kettles for boiling water.
They were especially popular in the northern areas of Japan where it was colder, so having
the fire on all day with a pot of boiling water was a good way to keep the house warm.
This was also close to the major centre of production, that is the town of Morioka in
Iwate prefecture, and to this day that is the area known for the highest quality tetsubin.
Tetsubin produced there are known as nanbuteki, nanbu meaning the area, and teki meaning ironworks.
During this time in the mid to late 1800s, photography wasn't quite popular yet, so
advertising these cast iron kettles was difficult.
So instead, the studios who produced the tetsubin made miniature versions which they could send
around the country, something a little smaller, perhaps this size.
At some point, someone looked at this tiny little kettle and said, that's actually a
From that idea, they coated the inside with enamel, added a tea strainer, and that was
how you get the tetsubin shaped kyusu, also known as a tetsu-kyusu, an iron kyusu, and
this is the type that has become really popular outside of Japan as the cast iron teapot.
This was only developed around 50 years ago.
But today, we're not talking about kama or tetsu-kyusu, we're talking about tetsubin.
One reason that tetsubin are so popular and loved is that the raw cast iron interacts
with the water as it boils, producing an iron-rich water that is soft and mellow to taste, and
also improves the taste of green tea that is made with it.
You only get this if the iron is uncoated.
So in a tetsu-kyusu, which has been enamel coated on the inside, there is no interaction
between the water and the cast iron, rendering the entire purpose of a cast iron tea vessel
moot.
While tetsu-kyusu are often mass produced, the majority of tetsubin are still individually
handcrafted, in a process that has been passed down for almost two centuries.
First, a specific design is created and drafted, and this is then turned into an outer shape
mold for the body of the tetsubin.
While this mold is drying, the surface pattern is hand applied.
In this case, you can see there are these little bumps in a hexagon pattern, this is
a sort of kikko or tortoiseshell pattern.
These bumps are hand pressed into the side of the mold as it is drying.
In this tetsubin, the bumps are larger, so there are fewer of them per row, so it's a
bit easier to make a mold with big bumps.
These bumps are a pattern known as arare, meaning hailstone, and are a very popular
decoration style for tetsubin.
The smaller the bumps, the more bumps you have to add to make the surface interesting,
so the more time and labour it takes.
After the mold is created, it is dried and fired at about 1300 degrees celsius.
After the outer mold is made, you must make an inner mold that is only 2mm smaller than
the outer mold, and this inner mold is made of a mixture of river sand and clay.
Both molds are then covered in such to prepare for the casting of the molten iron.
These molds must be arranged perfectly so that the 2mm gap between the inner mold and
the outer mold is consistent all around.
Once this is achieved, the molten iron can be poured into this 2mm space filling it.
Then the outer mold can be taken off, and the inner mold must be destroyed to get it
out of the newly casted tetsubin.
After the inner mold is removed, the tetsubin body is held over a charcoal fire that's
burning at roughly 800 degrees celsius for around 30-40 minutes.
This helps form a rust-resistant iron oxide film on the surface of the iron body.
After this, the piece is filed to remove any sharp burrs, and is heated once again to around
300 degrees celsius while painting it with a thin mixture of urushi or Japanese lacquer.
This is followed by another coating of tea mixed with iron acetate, and only then, once
all these coatings and heatings have been completed, is the handle attached, and you
have a finished and ready to use tetsubin.
Now that you have a finished tetsubin, you have to know how to use and take care of it.
While they are fantastic pieces of art, they are cast iron wares, which means there is
a little bit of maintenance and upkeep that you should be aware of when using one.
Depending on the producer and model of the tetsubin you have, the type of heating that
you can use on them will vary.
Most tetsubin can handle a charcoal fire, or a wood fire, or a gas fire, because these
are the most traditional types of fire, and that's what tetsubin were designed to be used on.
Certain ones can be used with electric coil stoves, as well as induction stoves.
Today I'm using a tetsubin by Kunzan Kobo, or Kunzan Workshop, in Morioka, Iwate.
And this tetsubin can be used with all of the above heating elements.
Once you have your new tetsubin, you should rinse it out, and boil it 2 or 3 times, pouring
out the water, making sure that everything is nice and clean.
No matter which heating technology you are using, you should keep the heat at a low to
medium setting, so as not to damage the tetsubin.
After the 3rd or 4th boil, the kettle will be seasoned and ready to use.
Let's start boiling some water!
Today I'll be heating my tetsubin on this furo, but you can use your kitchen stove if
you so choose.
It's important to know that you should never heat a dry pot, the same as any cooking pot
you might use.
If you do heat your dry pot accidentally, make sure you let it cool down slowly instead
of shocking it with cold water, so that you don't damage it.
With that being said, let's put the kettle on the furo, and start boiling.
When filling the tetsubin, you don't want to fill it much higher than the base of the
spout, otherwise you'll have hot water spraying out of the spout while it's boiling.
When you are placing the lid on your boiling tetsubin, you don't want to put it on all
the way, this will cause the steam to sputter a lot out of the spout, especially if you've
overfilled it.
So you want to have it slightly ajar, with the opening facing away from you, that way
when you go to reach for it, the steam is going this way and not hitting you in the
hand or the face, which would be unfortunate.
Now we'll just wait for the kettle to boil.
Now that the kettle is boiled, or rather, hot enough to make matcha with, we can make
some tea!
Traditionally, in a tea setting, you'd actually have the water closer to boiling, but for
everyday drinking, I prefer my matcha around 80 degrees Celsius, which is where this is,
or at least where I feel where this kettle is at the moment.
As the kettle has heated up, the lid will be probably too hot to touch, even though
the lid is designed, the lid knob, the tsunami, is designed to have airflow to cool it down,
you can hold it and move it, it is just a bit hot.
So it's highly recommended that you use some sort of cloth to hold the lid down while you're
pouring the tetsubin.
The handle might also get hot, but that's usually less of the case, especially if you're
on induction, the handle won't really get hot.
And also if you have the lid open so that the steam goes away from the handle, if you
had the lid open all the way, then the steam hits the handle, and that's going to be too
hot to hold, so don't do that.
The tetsubin is traditionally used with the bondemai, or ryaku bondemai, that's the first
temai or tea ceremony practice that a student of tea would learn, so that's what we can
do today.
I have pre-sifted some matcha into this Natsume, today I'll be drinking Eiryaku, produced by
Issho-en in Uji, which is one of our everyday usager matchas.
The first step of every temai is to purify the utensils using the fukusa.
Today's chashaku is one that I carved myself out of some bamboo.
Using the chakin, I can hold the lid down so that it doesn't fall off when pouring the
tetsubin.
Now with hot water in my bowl, it is preheating, and I can use it to rinse out and soak the
tines of my whisk.
As you can hear the sound of the tetsubin boiling, this is called matsukaze or shofu
in Japanese, meaning the wind in the pines, because it kind of sounds like wind blowing
through a pine forest.
Normally I would dump the hot water from rinsing the chasen, but drinking hot water, like plain
hot water from a tetsubin, is actually a relatively common practice.
It's called shirayu, which really just means white hot water, white water.
You do this because tetsubin boiled water is tasty, and the extra iron content is good
for you.
And I'm thirsty.
As always you want to make sure that your chawan is nice and dry before you put tea
in there, otherwise the tea will stick to the sides of the bowl.
Today's bowl is an irabo style chawan.
Irabo is an old Korean style of bowl, and this one is made by Nakamura Yohei in Kyoto.
Again you want to make sure that you're using a cloth, in this case a chakin, to hold the
lid down of the tetsubin so it doesn't fall off while you're pouring it.
Today I'll be going for a lower foam style of matcha.
If you want to learn more about the effect of matcha foam on the flavour and aroma, you
can check out our video on that over here.
Itadakimasu!
Erioku is a little nuttier than some of our other uji matchas, not quite as nutty as a
yame matcha, but it has a nice deep and rich round flavour.
As one of our daily usucha matchas, it's not incredibly sweet, but the extra iron content
from the tetsubin water helps bring out some of its natural sweetness.
Now I'll use the hot water to clean my bowl and chasen, and I'll use my fukusa to clean
my chashaku.
When you're done using your tetsubin, you want to make sure you empty it out while it's
still hot.
This allows the residual heat of the cast iron to evaporate all the water so that it
doesn't rust.
If you leave water in a cast iron piece and let it sit there for a while, that's how you
get rust, and rust is the main enemy of cast iron.
So I'll empty this out and turn off the flame.
Of course, you'll want to leave the lid off to allow all of the steam to escape.
It is said that if you wipe the outer surface of the tetsubin using a damp cloth or a tea
soaked cloth, you can bring out a natural luster from the cast iron.
Again, you want to do it while it's hot so that the water will evaporate immediately.
Of course, you'll want to make sure that the tetsubin is 100% dry and cooled down before
you put it away for storage, so make sure you let all the water evaporate before putting
the lid back on and putting the tetsubin away.
Over time, you might notice white or red spots appearing on the inside of the tetsubin.
This is completely normal.
This is actually how the iron in the tetsubin interacts with the water.
It is a small amount of rust, but it is completely manageable.
As long as the water is clear and tastes good and isn't cloudy, then the tetsubin is functioning
normally and perfectly safe and good to use.
As I mentioned earlier, tetsubin receive a very thin uruji lacquer coating when they
are made, and this helps slow down the rusting process, but it is still a piece of cast iron
and over time, cast iron will rust.
The only important part of maintenance is to make sure that this rust is kept to a minimum
amount.
If you have a vintage tetsubin that's entirely covered in red rust on the inside or you have
a new tetsubin that somehow manages to accumulate a lot of rust, there are a few ways of going
about removing this rust and stabilizing the cast iron.
The most commonly advised method is to boil tea in the tetsubin.
So you can get some cheap green tea, usually green tea is what's advised, put it in the
tetsubin, fill it with water and boil it over the stove.
It might take a few hours, it might even take a few days, but the catechins, the antioxidants
in the tea leaves will actually turn the red rust into black rust, which is much more stable
and that will prevent the rust from actually damaging the cast iron pot.
I've had to do this with vintage tetsubins or vintage kamas and I've had to keep them
on the stove for weeks.
If the rust is really bad, you'll have to empty it out, fill it up again, add more leaves
because the water will come out black.
With a new tetsubin, you don't have to worry about that, it's perfectly usable after a
few rinses.
Again, as long as the water is clean and tastes good and isn't cloudy, everything's good.
Of course, when washing or rinsing or ever cleaning a tetsubin, never use anything but
water.
You don't want to scrub it, you don't want to use any soaps because these can damage
the delicate oxide coating and urushi coating present on the cast iron.
So only ever use hot water or if it's really rusty, you can use tea.
Traditionally crafted handmade tetsubin are an absolute pleasure to use, which is why
I'm so happy to share these amazing tetsubin from Kunzan Kobo headed by third generation
craftsman Sasaki Kazuo with all of you.
Preserving the traditional craft techniques of Japan is one of the reasons that we founded
tetsubi in the first place.
So I hope you all enjoyed today's video about tetsubin.
Let me know in the comments if you have any more questions about them.
Thanks very much for watching and if you enjoyed this video, make sure to hit like
and subscribe to see more like it.
Perhaps an actual video where we visit Kunzan Kobo and watch them pour molten iron into
a mold.
That'd be fun.
Anyway, have a nice day and drink lots of tea.
