oak tray, wood carving

Oil Painting Portrait
34 followers
Jul 11, 2025
Hello everyone!
I have a drawing of a tray.
A grape leaf.
Simple, not complicated.
So now I will make a workpiece.
And I will make a workpiece from oak.
Now I will bend and glue.
For those who are interested, I use PVA glue.
German manufacturer.
D3.
Now I will unscrew the clamps.
And once again I will bend.
Otherwise, here I got some kind of bolt.
And I will break the leaf on the workpiece.
And, of course, I will cut it out with a jigsaw.
I screwed the leaf to the workpiece with a clamp.
So that it does not run back and forth on the table.
And began to deepen.
So watch the process.
This side is enough for now.
I think it's deep enough.
It is necessary to cut the back side.
To give the leaf a thin, neat look.
I will not grind the back side of the branch.
Only the front.
I cut it out.
It's time to hide it with a jigsaw.
Here I tried on a piece of cherry.
Chestnut and oak.
I will focus on the chestnut.
I will not show the process of opening with a jigsaw.
I will show the finished product.
I think everything is clear here.
As I said.
I opened the chestnut with an alcoholic jigsaw.
It looks pretty good.
Dark.
Brown.
Then I removed the varnish twice.
The end is quickly drying.
And what can I say about the oak?
The oak is probably the same in Africa.
Hard.
If you can make a tree from some other wood.
Do it, of course.
Or.
But the oak was hard to grind and cut.
But the fact that there was no hardwood.
It makes me happy.
Who liked it, put likes.
Do not forget to subscribe to the channel.
Good luck to everyone. Goodbye.
