DIY Jellyfish Lamp from Pipe Cleaner ⋆。𖦹°⭒˚

Crafted Touch
15 followers
67 Video Views·Jul 6, 2025
✨ In this video, I’ll show you how to make a glowing jellyfish lamp using chenille wire — it’s soft, whimsical, and perfect for room decor or creative gifts!
Materials you’ll need:
– ~100 pieces of chenille wire (I used white and blue)
– Scissors
– Pen or marker (to curl the tentacles)
– Small LED string lights
– Ribbons or tulle (optional, for volume)
– Thin wire or fishing line (for hanging)
Make sure to mix different lengths and shapes for a more realistic jellyfish effect 🐙
Hello my pumpkins! Today we're making a jellyfish lamp out of chenille stems.
Let's jump right into the tutorial. You'll need up to 100 pieces of chenille wire,
just to be safe and have plenty to work with. First, take one piece of chenille wire and leave
about 1 cm at the end. Then take another piece and start attaching it also from the end. Wrap
it slightly around the base wire to secure it. Now find the center of the second wire,
fold it and bring the other end next to the first one. Wrap that end around the base wire too.
Keep repeating this method, attaching more wires next to each other, forming little loops.
Continue until you reach the end of the base wire, but don't forget to leave about 1 cm free
at the end as well. Now take one white chenille wire and thread it through the center of all
folded wires. This will hold everything together. Twist a white wire right in the middle to secure
the shape. And just like that, one half of our jellyfish is done. Now shape it gently with your
hands as shown in the video. You'll notice that two ends of the white wire are sticking out.
Twist them together into one straight line. Now it's time to connect both halves. Line up the
two twisted ends and twist them together. Remember those 1 cm ends we left earlier?
Twist those two to secure both sides. Next, tuck in the extra wire from the top side into the
jellyfish as shown in the video. This creates a clean finish and give us the perfect base to
attach the jellyfish legs later. Now let's make the jellyfish tentacles. Take one full chenille
wire and start thinning out the ends with scissors as shown in the video. This gives them a more
delicate wispy look. Some tentacles I made longer by combining two wires and some I made using just
one. I created three different lengths. One short one made from a single wire, a medium one made by
combining one full wire and half of another, and the longest one made by twisting two full
wires together. Then I took a pen and wrapped each tentacles around it to create a spiral shape.
After that I gently stretched the spiral to get a wavy line. These are the jellyfish legs. In total,
I made one long tentacles, two medium ones, and the three short ones. But feel free to make more
or less, it's totally up to you. Now it's time to attach them to the jellyfish. There's a base
inside the jellyfish where I secured two medium tentacles and the one long one. On the sides,
I added the smaller ones. I tried to make them look like they're floating invisibly. I also
added a string light and some ribbons to give it a more dreamy and airy feel. To hang the jellyfish,
I used one chenille wire as a loop. But if you want a cleaner look, you can use a thin fishing
line. I just didn't have any at the moment. And that's it, our jellyfish is done. Here's how it
looks with the lights off and here's how it looks glowing in the dark. So magical, right? I think
this is one of the most unique DIYs I've ever made. So thank you so much for watching and
don't forget to like and leave a comment. See you in the next video, bye-bye!
