4 years of boat building in 20 minutes (EP 18)

All about Boats
1 follower
1 Video View·Jul 6, 2025
It's time for a catch up!
Here we go back in time to show you all how Tarkine started, from laying the keel to fastening the first planks! Matt takes some time to answer a few questions that have come up and a recap of what been happening this past year.
And we're building a boat by the river.
And we're in southern Tasmania and we've been building
our boat Tarkon in the background for the last two and a half years.
Good morning, good afternoon, good evening, wherever you may be in the world.
I am putting together a video because my shoulder's not healed yet and I still have to
take it easy. Ifka's gone to work for a month at a festival, Dark Mofo, in Tasmania.
So she'll be working there in the build-up crew, helping build stuff, running the site with all
the crew up there. So for the next month or so we're taking it easy. I'm just going to lay back
and sort of work on videos and Ifka's going to hopefully bring home some money to keep going for
another couple of months. We'll see how we go. We've had a few comments from people that are
curious how Tarkon started. You've noticed we've started our channel quite late on because, well,
we just didn't get it together in time. We got too excited. But there's a lot that happened
before we started filming that people may find interesting. We didn't record anything along the
way, so you'll have to bear with me as these will be photos. I can explain the photos as we go along
and you can sort of get an understanding of how we got the hull constructed and the frames and
how we built her up to the point that we got to when we started this channel. It's kind of
interesting. We were very much in the deep end by then. That was pretty scary to just start building
a boat with not much experience, just books and a bit of, I don't know, a bit of talking to various
people that have built strip plank boats before, out of hardwood particularly. There's a couple of
boats around southern Tasmania that were built that way. So we just reached out and talked to
as many people as we could before we got started. So to fill you in, Tarkon is 41 foot, strip planked,
diagonal, fiberglass, inside and out, with laminated frames. She has a laminated backbone
also and a lot of this building we work with laminations because you can take advantage of
timber that you may not usually be able to use, especially with strip planking. Our strips were
30 by 25, 26 mil or so, and that was the thickness that we ran for. By having that
thickness you could find smaller planks and use it to your advantage instead of having to cut the
shape of the plank out traditionally, which can often cause quite a bit of wastage, but that's
personal preference for building boats like that. So we started with a lofting table, a very large
lofting table, I think it was 16 meters. We lofted full size. We used flooring and painted it. The
loft table was elevated 900, so almost a meter off the ground to stop OBR puppy to get up there
because he'd make the floor dirty. It's a big concern keeping your floor quite clean, it's
you know, you're working very accurately and you need to be able to see all your marks. So we built
an elevated loft floor and we lofted full size. All the backbone, the rudder, the keel, stern posts,
transoms and the moulds. So the moulds were made out of MDF and they were built up from the loft
floor. So we'd loft our lines out and we transfer those lines onto moulds, bring them up and set
them up on the backbone. The very first thing we did was actually make the backbone and lifted
her off the ground so that we could always get the lead underneath and not have to move the boat.
So we laminated up a massive backbone and propped it, got it all true and square and straight
and then we were able to start putting the moulds up. Most of them were okay with the two of us
lifting, they were fairly heavy at times but we managed to get them up and in place.
And then you square your moulds off, you true them up vertically as well with levels to make
sure that everything's square and you're not building a boat that's sort of out of whack,
out of plum and she's fair. It was meant to be with laminated frames but we decided to go for
moulds because then we could run ribands, so thinner bits of wood around the hull and see
the shape of the hull and see how fair she is. As novices this was an easier way for us to see how
the boat looks. So we made the moulds, we ran ribands around the whole hull all the way up,
we had the shear line marked, everything like that and then once the ribands were on we were
able to start laminating frames on the inside of the ribands. We used epoxy and laminations
to laminate up our frames. They were laminated to the ribands but there was tape there so we
were able to take the frames out and then put them through the thicknesser, clean them up,
square them up and then they go straight back in to the size they are. Once we had a laminated
frame in we were able to drop a floor timber in and bolt that in so then that connects the keel,
the frames and the floor together which goes down to the lead and that keeps it very strong.
Planking Tarkine took us, for the fore and aft, took us I don't know a couple of months or so,
the most time consuming was machining and preparing timber and scarfing and preparing
the longer lengths that you need. She was fastened to the laminated frames because they were already
in place. We removed the ribands as we planked up so each time we got a bit further we removed
a few more ribands to keep the shape and keep her in position and we would bronze screw into
the laminated frames and edge nail with bronze nails down so that creates a really strong
hull and there was epoxy obviously in between the seams of the planks so it becomes this
incredibly strong structure. So we worked planking up for a couple of months and that was you know
quite a push, quite an effort but we got there and it was very rewarding to watch the hull grow
as she comes up and as you plank further up the hull.
And then we once we'd planked up we had a chance, I had a birthday party
and I got my mates down for the first time to help out and remove the moulds
and we did that in a couple hours. It was a great feeling to pop all the moulds out,
remove them from the hull and just have this massive wide open beautiful shape of a boat to
look at and then you think well what now? Where do we start? So we cleaned up the hull obviously
and then we started with the beam shelf and deck beams because that was sort of to get an idea of
the cabin space and the skylights and the hatches and to work out where the interior fit out would
go. We didn't follow the design for the fit out, we followed our own design for where we wanted
cabins and where we wanted all our lounge and the galley and the heads, chain locket, you know it was
all more specific for us and how we wanted to use Tarkine as a cruising boat with us two and
potentially another couple and one more so five people max on board at any one time. So yeah we
did the deck beams and the beam shelf, slowly tinkered away with that and then it was bulkheads
and matching bulkheads and working out where you want to put a bulkhead in and doing a, we did a
lot of dry fitting and mock-ups with brace ply just putting them in certain spots and getting
a feel for the space and working around until we had sort of what we knew what we were doing
with that and then we could set in stone our deck beams and all that sort of stuff.
I'd just really like to thank our patrons and viewers, you guys are doing amazing, your feedback's
awesome, we really enjoy it, seeing the comments roll in with all different stuff, a lot of great
advice that we've taken on and it's really good to, you know, have some outside perspective of
how we could do things and what we could change to make life easier and better or just on products
and that sort of stuff so you guys are doing a great job in keeping us going, we're going to
keep pushing on with this channel for a while longer and just see how the ball rolls and how we
fare with it. For now it's becoming a good sort of documentation of the build also for us and for
our friends and family overseas and obviously for you the viewers that I hope one day someone's
going to watch these videos and think yeah I can do this, it's my time, I'm going to build a boat
and if you build a strip plank boat at least you'll have a bit of advice along the way and
what not to do and maybe what to do. So thank you all for viewing, liking, subscribing
and getting involved, it's much appreciated.
So
Solid
plane.
