如何用鉛筆測量
影像雜貨志
18粉絲
15 次觀看·2025年10月25日
How to Measure with a Pencil by Vladimir London
There are five main ways to measure.
One. Measuring vertical alignments.
Two. Measuring horizontal alignments.
Three. Measuring angles.
Four. Measuring cross points.
Five. Measuring relative proportions.
To measure with a pencil, place a vertically positioned drawing board,
so you can see both the drawing and the model simultaneously.
For all measurements, fully extend your arm with a pencil
and stand or sit at arm's length from the drawing board.
Keep the pencil perpendicular to your line of sight.
Close one eye and rotate your whole body towards the model,
so you look through the pencil on the model.
Then, keeping your arm straight,
rotate your body back to the drawing board,
so you can check the same measurement or alignment in drawing.
Let's start with measuring vertical alignments.
Keep a pencil strictly vertical at the end of an extended arm.
Check some vertical alignment in the drawing.
Then, rotate the body towards the model
and check the same alignment in life.
For example, in the drawing,
the model's hand is vertically aligned with the side of her neck.
We can check if this is the case in life.
Measuring horizontal alignments.
By holding a pencil strictly horizontal in a fully outstretched arm,
we see that in the drawing,
one elbow is slightly higher than the other.
By examining the same horizontal alignment in life,
we can confirm that the drawing is correct.
Measuring angles.
When measuring angles,
it is critical to keep a pencil strictly perpendicular to the line of sight.
The angle in question, for example, the model's forearm,
is then checked both in the drawing and in life.
Measuring cross points.
We pick one line,
for example, the angle of the model's arm,
and check at what points this line crosses the body.
Then, keeping the same angle,
we check whether that line has the same cross points in life.
Measuring relative proportions.
This is the most important measuring skill to have.
Hold a pencil in a fully outstretched arm
so it's strictly perpendicular to your line of sight.
Glide your thumb along the pencil's end
and mark the distance in question by aligning it with the model.
Then use that dimension to check other relative distances in life.
We can see that, for example,
the distance between the model's elbow is twice her waist's width.
The same relative proportion can then be checked in the drawing,
this time by gliding the index finger along the pencil's tip.
Such relative proportion measurements work with any dimensions in question.
For example, we can compare the model's waist width
to her head height.
