Bargue 巴爾格繪畫課程 - 19 - How to Render
影像雜貨志
18粉絲
2025年11月9日
OK, so as we finish up our block-in stage,
which is the part where we're using all straight lines
to kind of block in the major shape of our drawing.
The next thing we want to do is to learn and practice some skills
that we're going to be using to shade it,
or also known as rendering or turning form.
So shading, rendering, turning form,
those all mean laying down value
to try to show three-dimensionality.
So one thing that makes shadows
and that makes objects look three-dimensional
even though they're on a flat surface
is when your shadow shape is pretty flat.
And what I mean by that is that
there are not a lot of shifts in shadow shapes.
And it's actually its own skill
to get a shadow shape to be nice and flat and even.
So let's pretend here that this square
is a shadow shape that I want to fill in.
So in order to fill this in as flat as possible,
I want to do a few things.
I want to make sure that when I'm putting value in here
that I'm layering it in.
So I want to press lightly
and layer value until it gets darker.
What I do not want to do
is to go right away into the darkest that I can get.
If you do this, it'll do what we say killing the paper
because you're actually damaging the surface of the paper
and it'll limit how much charcoal
you can lay on the paper.
So you want to get that dark value
by layering with your charcoal
and building up the value.
You'll hear people who are skill-based artists
talk about sneaking up on the value.
What that means is that
they're just kind of building layers of value.
So what I like to do
is just kind of get one layer down there.
And you'll see once I have this layer down
that at first it's like, oh, OK, that's all the same.
It's nice and even.
But if you look closely, you can see that it's not.
You can see that, for example,
this area around here is a little bit lighter
than this area over here
This area over here has a light spot in it
with a darker spot nearby.
And the more we can flatten this value,
the more we can make it look all one value
with no variation with lights and darks within the shape,
the flatter our shadow shape will be
and the flatter our shadow shape is,
the more we can create the illusion
of volume in our light areas.
So what I'm going to do is I'm first going to look
for all the little light bits
that I can fill in and make darker.
So I already identified this area over here
as being lighter.
So I'm just looking.
I'm asking myself where are the lightest pieces
and just trying to fill them in
with a nice sharp piece of charcoal.
And again, it's important to notice
that I'm not pressing really hard.
I'm just laying in value.
I want to make sure not to kill the tooth of my paper.
OK, and once I've filled in the light bits,
the next thing I want to do is very carefully
lift out the bits that are a little bit darker
than what's around it.
And I'm going to do that by making a very sharp point
with my kneaded eraser
and just very carefully dabbing at
those pieces of dark that are sticking out to me.
So I'm seeing that there's a little bit right here
that's just a little bit darker than what's around it.
There's kind of a little stripe right here
that's a little darker than what's around it.
So I'm just gently lifting the areas
that have a little bit darker
that are a little bit darker than what's around them.
You'll notice that every few seconds or so
I'm re-rolling my eraser.
That's so that it continues to pick up the dark bits.
Now, some of you may be wondering
why bother going through all this tediousness
just to get a flatness.
And there are a few really good reasons to do it.
One, like we've already covered,
is that the flatter you can get your shadow shape,
the more form you will be able to create
the illusion of in your lights.
The other reason is that by training your eye
to see smaller and smaller increments of value,
you can gain more sensitivity and mastery over your medium.
So in this case, by pulling out the dark bits
and filling in the light bits,
what I'm doing is I'm training my eye
to see smaller increments of value.
And often you'll get to a point where you're like,
oh, I can't see the dark bits.
And then someone points one little dark bit out to you,
and then all of a sudden you can see all the dark bits.
So what's happening is that
you're training your eye to see smaller increments of value.
And that will be so helpful to you
when we start turning really nuanced form in our light.
OK.
So we are close to getting a pretty flat value here.
And this is the technique we're going to use
whenever we're filling in our shadow shapes.
