毛髮和羽毛繪製技巧
影像雜貨志
18粉絲
7 次觀看·2025年11月3日
Hey everyone, welcome to my channel, where I help you become a better artist.
So, I have a couple of announcements to make before I get into drawing feathers and fur,
which, by the way, the majority of you did mention that in the comment section on my last video.
So, the announcements I want to tell you about involves that last video.
I had no idea that it was going to blow up the way it has.
So much so, that I woke up this morning and I found out that I was monotonous.
So, if it wasn't for you guys, I wouldn't be monotonous.
Thank you very much from the bottom of my heart. It meant the world to me.
I was planning on getting monetized sometime in the spring or summer, hopefully.
But it happened last night, and I am not prepared.
Anyway, I do want to make one smaller announcement attached to that one.
So, I was going to open a Patreon, but I don't need to anymore because now I can have channel memberships.
So, when I come back for my Thanksgiving break, which I'm leaving this Saturday,
I'm going to figure out what I want to do with the memberships, and then we'll go from there.
So, I'll make an announcement.
But anyway, let's get into fur and feathers.
Now, a lot of you have been wondering about how to apply pencil to paper
when it comes to making things fluffy, furry, stringy, etc.
I have a couple of examples here.
One is this bird, lovely bird.
Two, this is more of a...
It's taking reference and then making a character in my mind.
So, I think it was a herring, but I don't remember.
And I just put like a little mean face on it.
So, you can see a combination of super, super fine fur,
and then it flows into feathers that are dark.
So, again, it's going to be a combination of black Prismacolor, this one,
and then we have 4B pencil.
So, this is graphite.
We're going to be using both of those.
Let me zoom out a little bit so it's not as...
Yeah, there we go.
You can see my sketchbook.
OK.
Some more examples of fur.
OK.
So, here we have the laughing hyena, and this is straight up fur.
OK.
So, I'll be showing you how to combine feathers and all that lovely hair.
OK.
So, let's keep this one on the page.
Let me adjust my camera just a little bit.
And then what I'm going to do is I'm going to zoom in so you can see more of the detail.
All right, like that.
OK.
So, this is going full circle.
We have long fur, tufts of it coming off of the beak.
And then we have some pretty light feathering over here coming off of the cheek.
And you can see how I added value very, very lightly coming off into the head.
And one thing that I'm going to teach you guys in this lesson
is how to use the background tone of your paper for a highlight
instead of adding it in another meat.
I want to give a little disclaimer too.
So, some people in the comments have mentioned
that my last comment about it's not a good idea to use an eraser.
I think I did not explain what I meant by that.
What I meant was if you're drawing and you're jumping right into detail
and you don't like the detail so you grab your eraser like so
and then you erase the detail and then you draw on top of it and then you erase again
you're not designing by your pencil anymore.
You're at the mercy of this thing.
This thing should be used sparingly unless you are using pastel or charcoal
which it works beautifully.
So, hopefully you guys didn't take that from me.
Alright, how am I going to do this?
Well, let's put another little character down here.
So, let's give it a beak.
And this moleskin paper is slightly thinner.
You can see some of my drawings coming through.
I don't even know what's coming through.
Oh yeah, our other bird there.
I'm going to give it just a beak right here.
And let's give it a fun shape.
Like this.
And then maybe it has a slight overbite.
Like this.
And then maybe it's long almost like a shoe goer or something.
Okay, so once we have that.
And then we can put a head on it.
Now, how would I start adding feathers and fur if I wanted to combine everything?
Well, first things first.
Remember what I said in the last video about adding a nice coating of value.
That is super important.
So, what I'm going to do is I'm going to take my 4B.
And it's a short enough cut now where you can see it on camera.
How I'm holding it.
I'm going to hold it way back here when I'm shaped.
So, I'm not going to hold it all the way up here.
I'm going to hold it back here.
And then I'm going to take one direction.
And I'm not going to stop.
Until I cover that entire surface.
Going that direction.
And what this does is it ensures that.
When you complete this.
That you're not going to have any gaps in your direction.
It's, you know, we're impatient as artists.
Sometimes we don't like the fact that we have a large area to cover.
I'm going to physically turn my sketchbook.
So, the reason I'm doing this is because.
Every human being that draws.
Has a specific angle.
That they're comfortable with in drawing.
Some people like to contort their wrist.
A certain way.
Some people like to squeeze or rest their elbow or whatever.
I have a certain way that I like to turn my wrist.
So, I'm going to keep my wrist that way.
But I'm going to turn my paper.
So it does not compromise the layout of the drawing.
That is the key.
A lot of times we go like this.
You can't shade correctly.
Then you're just wondering what the heck you just drew.
So, these are two different directions here.
A rule that I always stay by for myself.
Is a minimum of three directions.
Gives you a pretty good.
Benchmark.
Or coding I should say.
Now.
Because these are going to be slightly more detailed.
Than a quick thumbnail sketch.
I'm probably going to give it about.
Five or six points.
Whenever I do my.
My very very detailed.
Pencil illustrations.
I'll go probably ten plus.
I already went that direction.
That's not good.
Here's another trick.
See how my sketchbook is turning.
And my pinky.
Is going to touch that drawing.
Guess what.
My black Prismacolor.
Number 935.
The wax from it.
Is keeping the graphite down.
Because I went over this whole drawing.
With wax.
So now I don't have to worry about it smearing.
It will smear if you push hard enough.
But I don't have to worry about it.
Just watch what happens.
And it also helps.
If you hold your pencil like this.
At the very end of the.
The butt of the pencil.
Because you don't have to worry.
About your hand.
Your palm resting on the drawing.
Screwing it all up.
Now you can see.
This is four passes.
Now I'm also pushing.
Very very lightly.
If I want to start layering graphite.
And black Prismacolor on it.
You're going to start to see areas darken up.
Which is going to happen.
Now I'm going to pick.
Just a comfortable direction.
And I'm going to go at the beat.
And I'm just going to push a little harder.
And I'm going to run it across the beat.
And then eventually up the head.
Now those of you.
That are watching this.
Notice that I couldn't care less.
About staying inside the lines.
Because I'm not worried about that right now.
What I'm worried about.
Is getting that really nice coating.
And I am still not satisfied.
The reason I'm not satisfied.
Is because when you draw something like her.
You're going to need.
That really really good.
Coating.
Now it's really starting to take shape.
And I actually have an idea here.
So maybe you can't see.
Some of the stuff showing through.
I'm.
I don't know if I have a piece of white paper.
I probably don't.
Oh yes I do.
Hold on just a second.
OK.
I think that helped.
I put white paper behind this.
Because I think too much stuff is showing up.
On the page over there.
I got some lettering over here.
So I don't know how much that's really going to help.
I'm going to do this one more time.
And what I'm doing now.
Is I'm kind of tilting my head.
You can't see it off camera here.
I'm tilting my head to make sure.
That everything is lining up correctly.
There's still some gaps.
In the pencil strokes.
I do not like that.
So I'm going to go over it.
Slightly different angle.
This is like the fifth or sixth pass.
Now we're talking.
Check out that coating there.
OK.
So ignore all of that stuff on the outside for now.
We actually are going to use an eraser in a little bit.
So I can clean the other part.
Now I'm going to take my graphite.
And I'm going to.
Lightly, very lightly.
Sketch in.
Where I want.
The beak material.
To meet the fur material.
Like that.
I'm darkening up this a little bit.
So you guys can see it on camera.
There we go.
I'm going to try to give it a unique shape.
Since this is a bird that doesn't exist.
I'm just.
I'm using just some techniques that I use.
That I have for this character up here.
This is a combination of different birds.
And I just.
I made it my own character.
OK.
Now here's what I like to do.
I'm going to start.
At the base of where the skin.
And the beak meet.
And I'm going to darken it.
Like this.
But I'm holding the pencil.
I'm holding it very lightly.
And I'm going to push a little harder.
And then fade backwards.
I'll turn the paper a little bit.
And I'm going to try to work my way up that line.
By fading outwards.
Into the rest of the cheek.
Now why am I doing this?
It's because.
Whenever there's a surface break.
Or a material break.
I like to draw attention to it.
By changing the value slightly.
What this also does is.
It's going to start to build contrast.
Between the bird and feathers.
That you're making.
And the beak.
One of the problems that.
Beginner artists have.
Is there's no value changes.
Within the drawing.
Everything looks like a sea of sameness.
And I'm going to utilize.
The cream color of the moleskin paper.
For the beak.
That's why I don't want to really put.
Any more shading on here.
Now I could do the opposite.
I could make it a very dark beak.
Like this.
Where I used the black prismacolor.
On top of the graphite.
And I just added material that way.
And then kept the feathers light.
So let's kind of reverse this a little bit.
Or we could just keep everything light.
But there's still going to be contrast.
So I'm just going to take the pencil.
Notice how sharp it is.
All right.
My pencils are always sharp.
And if they're dull.
Make sure you sharpen them.
Even on the top here.
You want to add value on the edge.
Because.
As flat as that fur is.
It still has a core shadow.
As it wraps around the other side.
Okay.
So the four basic shapes.
You probably have learned.
In foundation studies.
It's cube, cone, cylinder and sphere.
They all have.
They all have core shadows.
And all have highlights.
Because you can put a sphere inside this.
All right.
So now I'm going to grab it just a little closer.
And.
I might need a new.
A new set of 4B pencils.
Because these are kind of.
Running a little low.
Now you can see.
Look at the build up.
So you see all these marks.
Going every which way.
Well you can keep going over everything.
Even what I just drew.
Make sure that you finish off the direction.
And you cover that entire area.
Look how smooth everything feels.
I have it erased.
I don't use my finger.
I don't use anything.
No blending sticks.
Which are awesome by the way.
I don't use blending sticks or anything.
All right.
Now I'm.
Not quite satisfied with this.
So I'm just going to push a little harder by the beak edge.
Like this.
And instead of having.
A solid line.
I'm going to treat it as if there is.
The beak.
And the fur.
Which means we can have little breaks in here.
Little breaks here and there.
This is where the finer.
Hold on.
Totally lost my train of thought.
Oh.
This is where the finer fur is needed.
Okay.
One thing I like doing for the mouth slit.
I'm going to take the black prismacolor.
And.
What adds realism is.
It's not going to be one solid line.
Going all the way across the beak instead.
You're going to put little gaps.
In black.
To show imperfections.
In evolution.
It's like people.
Our noses are different.
Our eyebrows are different.
Sometimes we have one crooked ear.
I know I do.
Everybody's different.
So now.
There's going to be little gaps.
There's going to be a little character.
Added to this creature.
Okay.
This right here.
I'm not satisfied with.
Because it's literally a point.
So I'm just going to fade off.
Some darkness into the beak.
Like this.
And then I'm just going to add little tufts.
Just little marks like this.
Like little ants.
But you put it on the edge.
And what that does.
Is it.
It kind of blends in.
How the fur is growing from the beak.
It's a lot of fun to do.
And it.
If you guys are practicing this.
As we're talking.
And it's not looking the way you think it should look.
It's because.
It takes a lot of layer.
Fur takes a lot of layer.
This.
That took two hours.
For everything.
Especially this part.
This part was actually harder than that part.
Because there was no eraser.
Involved in this.
It was just.
Hey I'm going to leave the white of the paper here.
I'm going to put some value here.
And it just kind of evolved the way it happened.
It just turned out to be kind of like a.
A cool happy accident.
Okay.
So we're going to keep things.
Way simpler.
For this bird.
I'm going to put some more value up here.
Because I want the top of his head to look a little darker.
And let's add in the eyeball.
Let's be creative here.
And let's put an eyeball.
That's almost.
Kind of like a.
Vertical.
Lizard eye.
I don't know how that's going to work.
But why not right.
Let's put a little vertical lizard eye.
And then I'm going to.
Let's round it off right there.
I'm going to put a little bit of value in there.
And I'm going to leave an area.
One or two areas.
In the middle of that eyeball.
So that there's going to be a spec highlight.
Bouncing off of it.
I don't want jet black eyes.
Because it's not a squid or anything.
But I just want to put an indication in there.
That there's some cool things happening in the iris.
Like that.
Now.
Here's the fun part.
What am I going to do.
If I want to fade off her.
Into the rest of the head.
Let me show you.
I'm going to mark off.
By subtle strokes like this.
So I'm going to.
It's kind of like.
Foundation drawing.
Start with a line.
Go dark and then light.
One stroke like this.
Don't push as hard.
Practice thick to thin lines.
It's the same thing with shading.
It's also the same thing with circular motions.
So what I'm doing is.
I'm doing tiny versions of that.
And the reason I'm rounding it up.
Like this is because.
We have to imagine that there is an eye socket.
Where the bird's eye is sitting in.
Which means that the fur.
And the feathers are growing off of it.
And around the bone structure.
So remember.
You have to.
This is one of the things about being a creature designer.
Is you have to study anatomy.
In order to understand.
How to turn fur.
And stuff like that.
Put it out like this.
OK now.
The other thing that I want to mention is.
When you study feathers on birds.
And fur on dogs.
And cats or whatever.
The larger areas.
Tend to have the longer hair.
I mean there are a lot of animals.
That just have no hair whatsoever.
I mean look at a Great Dane.
It's like golf course.
Hair on it.
I'm going to.
Very lightly.
You can see the indications of feathers.
What I'm doing is.
I'm doing stretched out points.
Almost like arrowheads.
Like this.
And they're going to get bigger.
As I move down the head.
Now the other thing that I'm going to do is.
I want to make sure that they're not the exact same shape.
OK there's going to be differences.
No matter where.
They grow out of.
Now notice.
How I'm also adding some shape.
Up here on the top of the head too.
That's really important.
Because.
I don't want this to be super smooth.
And thin the whole way down.
Instead.
This is where I'm going to add the fur.
OK remember these thick to thin lines.
You just practice that.
Just kind of dabble your pencil or pen.
Like this.
Thick to thin.
And what you do is you move outwards.
See how I'm moving down.
And then I'm going out.
And then you go behind it.
And then you go down and out.
And then you go in front.
And you keep doing that.
And what happens is you're going to cover an area.
With fur slash hair.
Whichever one you want to use.
So since these are really tiny.
I'm just going to put some.
Some tufts of fur coming out by the beak.
Like this.
I also.
Let's get a little creative here.
Let's put a little bump.
And then maybe the nose sits right there.
And let's stretch the nostril out.
That's kind of cool.
Again.
This species does not exist.
It's kind of ugly.
But you know.
Not all nature is pretty.
Have you seen a turkey vulture.
Or a blob fish.
Doblin shark.
Those things are hideous.
But cool at the same time.
OK.
So now what I'm doing is.
As fur and feathers.
Blow up the forehead.
They're more exposed.
And longer.
In the air.
Which means they're probably going to be a little bit more messed up.
And I'm just going to put it.
This way.
Going backwards.
And you notice there's already like a really cool effect happening.
With the natural layering of.
The feathers.
Now the feather itself.
This is the shape that I'm doing.
So it's almost like a little spearhead.
An arrowhead.
Or like a flame coming from a lighter.
So then what I like doing.
And there's different kinds of feathers too.
I mean you have the little ones like this.
You have really puffy ones.
That are cute.
You see on the sidewalk all the time.
And then you have the.
The really long ones like this.
And they're kind of painted.
And they have little splits in them.
Those are kind of cool.
We're not doing the really long ones.
But we are doing the small little.
The spear ones.
Okay.
Now here's the fun part.
Once I get.
At least.
A nice outline of all the feathers.
And how I want them to grow.
I'm going to take the black prism color.
And outline the eyeball.
So you can really see it.
But I'm not really going to touch.
The inside.
Because I still want some of that light.
To penetrate it.
To give at least a slight indication.
That there's a pupil going around.
I'm going to take this.
Black prism color.
And I'm going to do small circles.
Flowing away from the eyeball.
Into the fur that's surrounding the eyesight.
Now look what's happening.
That layer of value.
That I laid down first.
Is taking care of all the space.
That doesn't have pencil strokes.
For feathers yet.
So now this value.
Coupled with the graphite.
Is adding this almost inset look.
Like the eye is coming.
Or the eye is placed inside the head.
I don't want to add too much detail.
With the black prism color yet.
I still want to do as much as I can.
With the actual graphite.
So I'm going to go back here.
And I'm going to go over the black prism color.
And I'm going to fade off some.
Some value.
Into the head.
And the other thing is.
Again this is where it benefits.
Learning bone structure underneath skin.
Back feathers fur.
Whatever you're drawing.
Is that the cheek.
Is going to have a role to it.
So the beak.
And then the cheek muscles.
That help open and close the mouth.
I'm going to put that core shadow.
Very very gently.
Right underneath.
There.
So what that does.
Is it's going to eventually make it look.
Like there's this rolling effect.
On the eye socket.
And notice how the light value right here.
Is going to be my highlight.
I'm not really going to put anything else there.
And then the value under here.
Is a little heavier.
And that's going to be a shadow.
Like a very very light ambient shadow.
And then this part of the skull.
Is pretty flat.
So I'm just going to take my value.
And I'm going to go over this part.
This part.
This way is a little bit more concentrated.
Because I'm working in a smaller area.
So I am turning my hand.
In certain directions.
But it's small enough.
Where I don't have to turn.
The sketchbook a lot.
I don't have to really twist my body.
Maybe a couple more passes.
Like this.
Now here's a really important part.
To make it look realistic.
Inside here.
You're going to have the bird's nasal cavity.
So this beak is made up.
So let's put.
A very very subtle.
Very subtle.
Indent.
Of where the underlying skull is.
And then up here.
At the edge of the head.
I'm going to make it darker.
And then I'm going to fade lighter.
Into this part.
Now look what happened.
Just by adding value.
This.
Looks like there's a soft spot.
In the skull.
This right here.
Looks like it rolls right up into the head.
Looks like a whole brow ridge.
It's going to go into the beak.
That's the key.
That's the power of doing values.
When you lay down that first layer.
Okay.
So now here's the fun part.
I love this.
There's many fun parts but this is special.
I'm going to add.
Tiny little tufts.
Of fur.
Coming off.
And we're going to do that.
The direction again where.
Instead of just going straight down.
All the time like a curtain.
We're going to expand outwards.
Because we want to give the illusion.
That the fur is growing chaotically.
From the skin.
So now it's.
And it's not.
It doesn't have to be super vibrant fur.
It doesn't have to be.
Incredibly recognizable like.
I got to draw every strand of fur here.
That defeats the purpose of having realistic.
Animal textures.
All right.
There we go.
And I'm just going to put.
A combination of feathers and fur.
Right in here on that cheek.
Look at that layer.
See what's happening now everybody.
That's what you want.
That's definitely what you want.
I'm going to darken the top of it.
Like this.
Now the other thing that.
Just comes with practice.
When you're doing eye sockets.
One line can change the expression.
On a bird forever.
If you ever look at a bald eagle.
They look angry 24 7.
If you ever look at a robin.
Or a pigeon or whatever.
They just look freaked out all the time.
Because of the round eyes.
And they don't really have a lot of shadow.
So what I'm doing is.
I'm giving it just a little bit of attitude.
And I'm going to give it.
Maybe some skin wrinkles.
Underneath all that fur.
Okay.
Once I do this.
I'm going to put places in between the fur.
And I'm going to darken it.
Just kind of randomly.
But I'm not making it up per se.
Because there's lines already laid down.
For the feathers.
But what I am doing is.
I'm putting in noticeable shadows.
In between everything.
This is where it really starts.
To come together.
Because check this out.
There are so many layers.
Happening right here.
With the beak.
The first layer of shading.
That I put on in five or six passes.
The small tufts of fur.
Coming out.
The shadows.
That I showed by just adding darker value.
To where the bone structure is underneath.
And then finally the larger.
Feathers coming off the side right here.
Like this.
Now.
Since there are so many different.
Types of feathers.
This isn't the only lesson.
That I'm going to give for feathers.
But this is how I would start.
I wouldn't start.
Doing stuff that's super complicated.
I don't expect all of you.
To just bust out your sketchbook.
And draw a peacock or an ostrich.
Or something with this ridiculous amount.
Of exotic feathers hanging off the side.
Start small.
Work your way big.
Like this.
You can get bigger feathers.
One thing I like doing to really.
Make everything pop off the page.
You then take your black prismacolor.
Like this.
And you go to the tip of the feather.
Okay.
And then you do these type of movements.
So see how close that I'm holding my pencil.
But I'm not pushing super hard.
I'm just starting dark.
And I keep doing that.
With a very subtle touch.
So look at the marks that I'm putting right here.
That's a very controlled marking.
That I'm going to put on the tips of all the feathers.
That are showing up.
Just like the bigger feathers.
And what this does.
Again look at my pencil.
Look how sharp I'm keeping it.
I wouldn't be able to put in these subtle details.
If I wasn't keeping it sharp.
So make sure you do that.
And then what I'm doing is.
I'm rolling it down.
Again very very short.
Burst of dark to light.
Like this.
This one gets a little bit bigger of a treatment.
So I'm just going to layer on top.
Same thing with this one.
So you can see.
That's what I did.
For this character up here.
Of course you can see that.
This took considerable amount more time.
Again I spent two hours on this.
I've only been on this for about 30 minutes.
But hopefully you guys.
Get a good sense of how.
I would start layering.
You know feathers and fur.
If you want to do it together.
Again in more lessons.
I'll show you how to do beaks.
I'll show you how to do.
Wrinkled skin.
We have.
I believe after this video coming up.
I'm going to try to post.
Every Friday or Saturday.
Next one is going to be slimy skin.
I can't wait to do that.
So let me just.
Put this in here.
There we go.
I'm just going to roll out some patterns.
I'm going to make this a little darker.
Like this.
If you want a really good trick.
On a.
A good technique for beaks.
Just to give you guys a start.
I'm going to put down black prismacolor.
On top of the graphite like this.
I'm going to shake my hand.
Not violently.
But I'm going to shake it.
To where it looks like I'm just scribbling.
On top of the value.
Look what that did.
It added a dirt texture right away.
Because I laid the foundation down.
Under the details.
It's taking care of.
All of the white space.
So.
Again.
I love doing this stuff.
I'm going to have a whole drawing series now.
If you guys want to see more videos.
About my creature design.
What I've done for games.
I have a playlist for that.
But also.
I'm doing these drawing lessons now.
So.
If you found this helpful.
Please like and subscribe.
And comment below and tell me.
What you found helpful.
And also.
Let us know about your struggles.
Because that's something that I would love to talk about.
Maybe in a later podcast.
And again.
I'm going to announce very very soon.
When my channel memberships are ready.
I can't wait.
Also if you want to join our creature design.
Workshop discord.
It is free to join the discord.
If you want to take the class.
Just let me know.
That link will be down below in the description.
Thanks everybody.
And I hope this was helpful.
And hopefully you'll be coming back.
I'll see you all soon.
