Agilite AMAP III - The must have assault pack for the K19 plate carrier

Ballistic Lab
1 follower
Jun 26, 2025
In this video, we take a look at the Agilite AMAP III which is an excellent day pack that also connects nicely to the K19 plate carrier.
Hey everyone, I caught one that I've been promising to show off to you guys for
pretty much forever and it's actually one of my favorite bits of gear.
Today we'll be taking a look at the Agilite AMAP3 backpack
and this is a really great bag that I use almost daily
and as a bonus it hooks into my plate carrier. Let me show you, let's get
started. So I teased the hell out of this when we
did our Agilite K19 review and it really has become my go-to
field use day pack and to be honest I love the Agilite K19 and the AMAP3
setup so much that I not only have one in multicam
but I also did an entire K19 and AMAP3 setup in multicam black also
and for the guy that doesn't even like rear packs all that much
it's got to be doing a lot of things right for me to not only have one
but then also recommend it to others. So let's tear into this bag
and I'll show you the size of the AMAP3 then I'll show you the features of it
and how the whole thing connects into your plate carrier for an incredible
combination and then we'll finish out with some
pros, cons and if I recommend it just like we always do. So let's start out
by looking at the actual size of the AMAP3. One of the most
striking things you'll notice about the AMAP3
is that it's actually closer to the size of a normal backpack
with a height of 5.7 inches, a width of 11 inches
and then 8 inches in depth. Now one of my main
complaints about a lot of these rear bags is that you can't really even carry
anything in them and as you can see here a few mags or
like a small wheel or toolkit and this flat pack is completely full.
Now we see the same wheel or toolkit in the AMAP3.
I barely even fill up the bag and I could easily throw in a bunch of
extra gear like a water bladder along with some extra mags and a
waterproof jacket and having the room to actually carry
things in a tactical bag seems a little bit
crazy. I can actually carry more than just
three children's lunchables which seems a little crazy when compared
to some of the other rear packs that are out there
but tell you what let's dig a little deeper into this AMAP3 and let's start
looking at some of the features and I want to start by looking at the
One of the biggest things you'll see here is the AMAP3 uses
actual full-size shoulder pads unlike a lot of other rear packs we've seen
that use straps that make it impossible to actually use a backpack
without looking like you're about to head to preschool and learn about shapes.
Oh hey guys I'm about to go learn about circles.
And since it's the size of a real backpack I use the AMAP3 for a whole lot
of day-to-day duty and field usage. Looking closer
at the shoulder pads we see they're fully padded and have a nice
ergonomic shape so it fits around your body nicely.
The front of the shoulder pad also has a d-ring on either side
with an elastic strap with multiple molly sections.
I use these sections to route a water bladder tube with a Grimlock carabiner
and I think Joe told me about this setup but then you don't have your water tube
just all flopping around and you just undo the
Grimlock and you can access your water tube easily.
The middle section of the shoulder pads also has a clip to connect the shoulder
pads together and help take the weight off your
shoulders for longer heights if you need to shift your weight around.
I don't know if I have an odd body shape though because those things just seem
like they're just trying to choke the hell out of me
so I usually just take those straps off the shoulder pads.
But the neatest trick of the shoulder straps is how they can be
easily removed. Just unfold the tab and push it through
at the top and bottom of the strap to quickly and easily remove the
shoulder straps altogether. And then you could just hook the entire
pack into your plate carrier. And yes yes yes we'll get to that.
It's way cool. Next though let's take a look at the outside of the pack.
Starting at the top there is a nice stout carry handle
that makes the entire pack feel like it's made to take a beating.
And to be honest I bet you this handle could double
as a drag handle when you connect it into the K19 also.
Moving down the sides there are four rows of three sections of MOLLE
to allow for additional pouches, tools, or whatever you may want there.
Moving to the front of the bag we see a large zippered pocket placed at the top
of the AMAP3. And the entire pouch here is about five
inches long by five inches wide. And this front pocket is awesome to
throw in like your phone or your personal effects
so that way if I'm out and about I don't have a bunch of stupid things in my
pockets all day. Moving down we see a large loop back
MOLLE section that has four total rows of MOLLE in the top portion
and also has two horizontal MOLLE slots on either side.
And that top portion is almost identical to the top
front bag of the K19 so you may be asking yourself
wait can I hook a placard into it? And yes you can.
If you really want to do you could install a second set of ITW Quasm clips
that could then hold an entire second placard
on your rear pack. So then you could have just this pack and placard setup
just thrown in your car and then use that setup to get to your main gear
or maybe a minimalistic plate carrier setup and then just connect this
placard into your carrier. Or just leave that entire placard on the
rear of your pack for just a backup. There's a lot of options there but let's
keep exploring some of the functions on this pack.
Below that first MOLLE section we see three full rows of loop backed MOLLE
that our placard could connect into or we could just put
cool patches on. Below that we see another strip of
hook that connects into the outer cover pouch.
This pouch area can be used to secure smaller items in this pouch
or this cover can be expanded to hold larger items
and attach the g-hooks into the top of the bag.
So I bet you're wondering like me if we can fit an actual helmet in there.
I don't know let's try it. Placing your Team Wendy carbon helmet inside the
outer flap of the AMAP3 is incredibly easy and it kept the entire
setup nice and secure. I also often use this section to place a
second set of shoes if I'm going to go be working in water
for the duration of the day. And there's also clips along the outside
of the AMAP3 so you can use that to either secure the contents
or you can use it to flatten down the AMAP if you want to have a slimmer
profile bag. Flipping the AMAP3 over we see the same
ultra comfy padded material that's used on the K19.
The center portion of this can be removed when we connect it into our
plate carrier. Yes, yes I'm going to show you. Let's
look at all the features inside the pack first before I show you
that though. Inside the pack is an entire loop back
portion on both sides of the pack. I also got the EDC organizer panel that
works great when placed in this location.
On the inside of the main pack also has a spot where you can place
pens, markers, chem lights or whatever you may need here.
I usually throw a pair of gator sunglasses into that actual EDC
organizer so I have a pair of sunglasses when I'm out and about.
And there's also a little hook that's on the EDC organizer that is really nice to
just connect my keys into so I don't have to worry about those
either. Moving to the other side of the bag there's a large zippered pocket that
gives access to the water bladder section.
The top of this inner pocket has a hook and loop clip to keep your bladder
secured to the top of the pocket. The top of the bag also has an opening
to easily feed your drinking tube out and connect it into the shoulders.
All right so I think that's actually all the features of the pack and I'm sure
you're thinking of some cool ways you could set it up for whatever it is
you're doing out in the field. But let me show you one of the actual
coolest things that this pack can do. Wearing it on the K19.
The first way you could wear it is to just wear it over the K19 as a regular
pack. The shoulder straps being regular straps
make this possible but it's not the ideal solution.
As this pack isn't super big if I was going to do this style of a bag on top
of a plate carrier I'd use a full-size ruck instead of a
small bag but I guess I would have access to everything.
So then looking into actually connecting the AMAP3 into the K19
we have a few options. We can leave the shoulder pads connected
or remove them. I usually leave the shoulder straps connected to the pack
mostly so I don't lose them but you do get a better overall connection to the
K19 with the actual shoulder straps removed.
The first step in connecting the AMAP3 is to remove the cover to the hook and
loop portion. You can place this cover in the
intersection of the pack for safe storage too.
Then you connect the AMAP3 onto the rear of the K19
and connect the clips onto the side and the bottom of the carrier.
And this works for like a fast and easy way to just connect your AMAP3 into
your K19 but you may have an actual pack that's
loaded down and you may want to use some of that
weight distribution of the actual carrier itself
and integrate that pack into the carrier. In that case you have to have the
shoulder pads removed and then you can lift up on the rear
shoulder strap portion to see the AMAP3 connection on the K19.
Slide the hook and loop tab on the shoulder pad
through the shoulder straps on the pack to give an
extremely solid connection. So you really have a quick and easy connection
or you can do a more solid connection if you have a heavier load
but either way it's quick and easy to connect and to remove it.
And you don't have to spend like an hour just weaving
MOLLE in and out if you want to take it off or put it on.
I really do like the functionality of putting it on my K19 though.
So let's do some pros, cons, and if I recommend it. The first pro,
it's a regular ass backpack. Unlike a lot of other rear packs we see,
the AMAP3 is appropriately sized to be used as both a rear pack
and a backpack. You can easily fit in an adequate amount of gear
to work well as a day pack. And the AMAP3 really has been my go-to pack
for when we go out and do training events. Alright, so let's look at the next pro
and that's going to be the multi-use functionality.
The rear of the pack allows me to connect in an additional placard,
tuck in a helmet, or even throw in an extra pair of footwear.
The shoulder straps are also smartly designed to support
whatever you may need when in a backpack configuration
or easily remove them to attach to your plate carrier.
The entire pack just has multiple levels of functionality all over it.
Alright, so I guess I'll say my last pro is that carrier connection method.
As you just clip in the AMAP3 into the K19,
you can quickly and easily remove the pack from the carrier.
This is a ton better than so many other rear packs on the market
that take forever to install or use some proprietary system
and then become completely useless once the actual pack is removed.
Attaching the AMAP3 into the shoulder straps of the K19
also makes for a great connection method
for when you're actually having it loaded down with a significant amount of gear.
So then let's look at some cons and I guess I really only have one
and I wish there was some way to do some form of quick disconnect.
Because when attached to the carrier, the AMAP3 is still unaccessible
and it would be awesome to see what the guys at Agilite could come up with
so you could take off the rear pack in a hurry
or just unhook one side so you could access the rear pack as a single user.
Overall, though, I highly recommend the AMAP3.
It's one of those tactical bags that's actually useful
and then also has a really smart connection method into your plate carrier.
And the features of the AMAP3 makes it a pack I can use as a day pack,
but then easily attach into my K19 and have all my gear ready to go
on top of one of the best plate carriers on the market.
This whole combination is absolutely one of my favorites
and I will say the AMAP3 is a must have for anyone that has a K19.
But I hope this review of the AMAP3 was useful in your purchasing decisions.
I want to say thanks to all of our Patreon supporters.
You're the ones that make all this possible and thank you for believing in us.
And I want to say thanks to everyone that likes, comments, and subscribes.
Comment down below what color AMAP3 you're going to get.
All right, everyone.
Ball shout.
Be serious, though.
On a scale of one to ridiculous, exactly how do I look?
