The EASIEST Way to Propagate Roses | How to Propagate a Rose from a Cutting

ROSE
39 followers
774 Video Views·Jun 21, 2025
In this comprehensive guide, we'll show you how to propagate roses from cuttings, a simple and effective method for expanding your rose garden. This step-by-step tutorial is perfect for both beginner and experienced gardeners.
How do you cut off a piece of a rose that is nothing more than a stick,
put it in soil, and then it grows roots and leaves like you see here? In this video,
I'm going to share with you the easiest way to propagate roses.
Hi, I'm Dr. Tom Warren, and you're watching The Plant Doctor. Let's get started.
So before we take our cuttings and propagate them, I want to walk you through what I want
you to do the day before you take your cuttings. I want you to water your rose thoroughly. I want
you to water it to the point to where if it's in a pot, you see water coming out the bottom of the
pot. If it's in the ground, I want you to water until you see water standing on top of the ground.
The reason is this. We're going to take limbs off of this rose and remove it from the roots. So the
day before, we're giving these limbs an opportunity to grab some moisture, store it in these limbs
before we cut them off. When you're ready to take your cuttings to start rooting, before you take a
cutting, I want you to take your pruners. I want you to open them up and spray them down with some
sort of fungicide. You can use copper sulfate. You can use daconil. There's a few others,
but I tend to go with copper sulfate and daconil. If you want to do this organically, USDA Organic
Copper Sulfate is listed on the organic list of chemicals, so you can use that.
So once we have cleaned our pruners, I want to select the branches that we'll remove for
cuttings. And what we're looking for here is semi-hardwood on our plant. Semi-hardwood,
you can take between your fingers and your thumbs and lightly bend it, and it will not snap. I'm
taking these cuttings in late winter, early spring, but you can use this method any time of year,
as long as you have some semi-hardwood. So before I take my cutting, I'm going to
take my fungicide and lightly spray where I'm going to take my cutting. I'm going to take
this whole branch right here, and we're going to make several cuttings out of it.
So if you have a leggy rose, this is one way that you can get some cuttings off of it. I'm
just going to prune this as if it was in the garden. Now that we have removed our stem,
we can take cuttings from this. And what we need to do is take a cutting one every four nodes.
A node is a site of vegetative development. That's where the leaves come out of the stem.
So we're going to count one set of leaves, two set of leaves, three set of leaves,
four set of leaves. And from there, we're going to make a cut. Once we have our cutting,
what we want to do is remove the leaves from the bottom three nodes and leave the leaves on the
top node of the cutting. And I'm going to be able to get several cuttings off of this one stem. So
I can go one, two, three, four. And so we've got three, maybe four cuttings here that we got off
of that one stem. A pro tip for you. Once you have your cuttings, remove the thorns off of the
cuttings. And that's just going to provide more opportunity for roots to come out of the stem
and into the growing media. Now that we have prepared our cuttings,
we can prepare our potting mix as well. And what I like to use is a mixture of a couple of things.
If I use just regular potting mix, I feel that this is too heavy of a mixture and it's going to
retain too much water. And I want to add a substance to it that is going to increase some
porosity and give it some better drainage and make it a lighter soil overall. And that product that
we use with this is perlite. So what we want to do is take a scoop of perlite, put it in our
container. And here I have a Rubbermaid, but you can use a cardboard box or whatever else you have
on hand. We'll also want to take a scoop of potting mix, incorporate it into our Rubbermaid
container, our cardboard box, whatever we're using and mix those two together thoroughly.
Mix your perlite and your potting mix to the point that it's a homogenous mixture. The next
thing that I like to do is pre-moisten my soil mix. Perlite tends to be extremely dry and dusty,
and sometimes potting mix straight out of the bag can be dry as well. The consistency that
we're looking for is moist, but not saturated. So we want to add water to the point that it
feels moist. We take it in our hand, we squeeze it. And if you feel water in it, but you don't
want it saturated to the point where when you squeeze that soil, there's just copious amounts
of water running off your hand. At that point, it's too wet. You'll want to let it dry out a
little bit. The next thing we need to do is select a container to grow our cuttings in.
You'll want something that's relatively deep, perhaps six inches to eight inches deep.
I'm going to use a Red Solo cup here, but if you have an old one gallon pot laying around that you
had a plant in at one point, that would work as well. The main thing is we're looking for depth.
So we can fill our cup up to almost the top of the cup. So I'm going to leave maybe a half inch
below the cup where there's no soil. And we want to compress that down lightly.
Now that our soil is prepared, we can begin to stick our cuttings. I like to use a rooting hormone.
You can have a powdered hormone or a liquid hormone, but you'll need some sort of hormone
that initiates rooting for these cuttings. And today we're using this powdered hormone. So
you want to take your cutting and you want to stick it down into the rooting powder
and get rooting powder, maybe an inch or two up the stem. If you remove your thorns,
like we talked about earlier, every place those thorns were removed, that's an opportunity for
roots to come out of the stem. And we want to try to get some powder on some of those.
Once we have powder on our stem, make sure to shake off excessive rooting hormone and then use
a pencil and poke a hole all the way down to the bottom of the cup in your potting mix. Once we
have a hole in our potting mix, take your cutting and stick it all the way down to the bottom of
the cup. We want maybe one or two inches of our cutting above the top of the soil layer. You want
to continue this process of sticking cuttings until all the cuttings that you have cut off
your original rosebush are planted and look something like this. Once we have our cuttings
prepared, I like to spray them one more time with some sort of fungicide. From here, we're going to
place our cuttings in a window that gets indirect sunlight and we're going to continue to keep them
moist for the next several weeks until they root. My preferred method for keeping them moist is to
simply spray them with water out of a spray bottle once a day, sometimes every other day.
The main thing we're looking for is to keep our soil moist but not saturated. So it's been roughly
10 weeks since we first put our cuttings into the Solo Cup and you can see we've got some vegetation
growing here. That's a good sign. Also, we've got some dead cuttings as well, which is to be expected.
Despite what some people may tell you on YouTube, nobody gets a hundred percent success rate with
doing cuttings this way and that's why I encourage you to do several cuttings. So we've got maybe
half a dozen up to 10 cuttings in here. So what I'm going to do is turn the camera around, give you
a point of view perspective of this. I'm going to start pulling these cuttings out and hopefully
we have some roots. We should because we've got nice vegetative growth on a lot of these cuttings.
Okay, so I've tried to position the camera so that we have some good focus here. It's always
difficult shooting this and from this angle and trying to get good focus, but I went ahead and
got some four pack cells and just pre-moistened some potting mix and made really big holes with
my fingers here in all eight of these cells. So if we do have roots here, we can easily just
transplant. I do not want you to just pull these straight out. You run the risk of breaking off
the roots if there are any. Take something like a pencil and very lightly start working these up
from the bottom. And I went ahead, there was two dead ones in here that I went ahead and removed.
All right, so this one, I hope that shows up, does not have any roots, but we've got some really good
vegetation still. This still could grow roots. So we're going to lay this over to the side for now
and we're going to go to the next one. And this one has roots. I hope that that shows up. I'm
going to try to get close here and try to keep it in focus at the same time. I hope that shows up.
There's three really strong roots there and there's some very small ones that I can see that
probably don't show up on camera, but we're going to plant this in these four packs. So we've got
one there. So we're back. So we took the dead ones out. So we're one for two right now.
And we're going to take the next one out. Nothing yet. So we're one for three. All right, so we're
back to 500. There's a really good root. So I hope that shows up on camera. You can see right there,
there's maybe half a dozen really good roots there. So we will plant this one.
These roots are very delicate. So trying to be extra careful with these.
And so we've got more roots here. Let's see. All right, so we are three for five now.
So if we were in MLB baseball, we'd be going to the all-star game. All right, we've got two more
we need to check. So I'm going to get this one. I don't think there's going to be any roots on this
because there's no leaves. And I was correct. So we have three without leaves. And this last one,
I'm expecting some pretty good roots here because this one's really put on
a lot of leaves here. Oh yeah, check this out. I'm hoping that shows up on camera.
I'll move it in and out and hopefully at some point it's in focus for you.
Okay. And we'll plant this last one right here. So we batted 500. No, we did better than 500. So
we had four make and three that did not. So what do we do from here? Well, our plants, our roses
that already have some roots on them, we're going to leave them in this four pack until they're
completely rooted to this four pack. Once they're rooted to that, we'll put them in a one gallon pot
and then we can plant them out in the landscape once they are one gallon size, which will probably
be next spring. So we took these cuttings in spring. We waited 10 weeks. I'm in June right
now, early June. And what we have is some baby cuttings is probably going to take another 10
or 12 weeks for them to completely root to this. And then we can put them in the one gallon pot,
which puts us into fall. So they'll probably overwinter in a one gallon pot. And then next
spring we can put them in the landscape for our cuttings that have green foliage, but no roots yet.
We can go put those back on the window seal and just wait for roots to appear. Hopefully
we don't lose them like we did with our other two. I hope this video helps you with.
I hope this video helps you with propagating roses. If you have a tip, trick, or hack that
you use to propagate roses that we did not go over in this video, please drop that down in
the comments below. We're a community of learners here on the channel, and I would love to learn
something from you, the viewer. Guys, as always, thank you for watching The Plant Doctor,
and until next time, happy gardening.
