Painting Clouds With Dramatic Side or Back Light in Watercolor!

Collect Watercolor Paintings
41 followers
Clouds that are lit from the back or side can be some of the most dramatic. Here's a demo on my approach to painting them.
Colors used in this video (M. Graham):
– Paynes Gray
– Cobalt Blue
– Cerulean Blue
#WatercolorPainting #PaintingTutorial #FineArts #Arts #Watercolor
Well today it's back to the clouds. I'm going to paint some clouds for you today,
but not just any clouds. These are rim lit, side lit, kind of back lit if you know what I mean.
Well you will before this is over. Yes I know you don't like sunny days.
Well I predict for you cloudy with a chance of ridiculousness.
All right well I thought I would do a cloudscape and what I wanted to do is focus on a cloudscape
that is edge lit or rim lit. Let me explain this kind of a cloud. This is a real good exercise in
painting clouds and very dramatic if you're going to have a cloudscape where clouds are your feature.
And what I'm specifically focusing on, the difficult part of this kind of a cloud
are these rim lights, these edge highlights. Now these are very distinct. You don't have to
paint them that distinct. I'm really thinking more in terms of just hot highlights. But what
you have is a dark background sky and I've got other examples. This is probably a better example
of a dark sky or a vivid bright blue sky. Fairly dark clouds but they're back lit which is cool.
It's really dramatic. Now you can mask that and paint these. I think clouds look a little
too deliberate when you do that. A little too forced. This is perhaps a little closer to what
I was thinking. So I will show you a method for doing this and we're just going to have fun with
it. And you may use this in a number of skies but I'm thinking mostly of paintings where you feature
a sky. And this can be done on the fly. I don't think you need to do any masking. It's it's two
main things and that's paying close attention to values and protecting these highlights. All right
this is a Kilimanjaro block. I love using arches for skies but uh I didn't have a block of arches
that was bright white. And because of the highlights that we're trying to get I want a
bright white paper. And the only bright white arches I have is in sheets. And I just wanted
to grab a block real quick. So I'm fine with Kilimanjaro. We're going to go with it. Bright
white. I've got this. It's hard to see but I've got this taped off. Got some color mixed up. This
cobalt blue and cerulean blue. And I've mixed in some Payne's gray. We're going to start out
by pre-wetting the entire page with clean water. I'm just using this uh Sterling Edwards blending
and glazing brush. I like to use it as a pre-wetter. Just want to get the paper soaked.
I'm not pressing. Just letting the brush glide over the paper because I don't want to like pill
it or anything or over brush it. And I want to start out thinking in terms of negative
painting the sky and where the cloud shapes are going to be. And I'm going to leave those
mostly white. Completely white. All right I'm going to pick this up too because I really need
this to be done mostly flat. So these are the top edges of my clouds. And then down here are the
bottom edges. I'm going to let those soften up into the clouds a little bit. And these edges up here
are what I want to protect as my highlight edges. These edges here. Again you want to focus on the
shape that this is going to be here. And these lower edges this is where I'm bringing this
Sterling Edwards brush. That can softly bring this up because this down here is not going to be an
edge. Now there might be edges within the edges just like the reference shows. But what I'm trying
to do is differentiate between my soft edges and my slightly harder edges. I can do quite a lot
while this is still wet. And here we got a edge overlapping an edge. And those overlaps are
important. This is another case of we got an edge here. Distinct edge. But I want to kind of soften
the edge above it as it moves up and gradates into that cloud. And then just
blending away from my edge my edges. As the washes start to move less you can figure out where you
want to add a little extra contrast. Be careful not to get much water additional water in there.
You'll end up with a background. I've got a fairly dry edge forming there and that's okay.
You can do that in places. I'm going to pick up I think this DaVinci Cosmo Top which doesn't
hold as much water. So it's a nice detailer for blending. I just want to touch some of these edges
here. I might be able to let that go. Stand it back up. I like how it's looking. It's looking nice and
and fresh. And the edges and all are looking spontaneous. I like that. And you can paint a
lot of skies and that won't happen. And believe me I've done it. You start one and it's just fail
all the way around. These go pretty fast and dry again. Now see where I added uh an additional charge
in here. There was more water than what was drying on the surface and I created a background. A lot
of times you can pick up some of that. Just be careful not to over brush it. All right we're
getting to the drying danger stage where if I do much more to it here I'm going to create backgrounds
everywhere. So I think it's time to let that dry before we go on to the next step. Well I interrupt
this program to show you my fail. Boom! You my lovely viewers I know love for me to show you when
I've made failures or mistakes. And look when you do clouds especially complex clouds you're going
to have a lot of fails. I have tossed a lot of skies and this one was not going the way I wanted
it to. I just thought I would show you that. I did a couple things different from what you've seen
so far in this video. Rather than just a soft sky all over I went back and picked up with tissue. Now
it's fine with that. That kind of made some interesting looking edges. And then I thought I
would totally dry it and then try to blend and paint each section of cloud in front of that and
then blend it out. And it wasn't going the way I wanted it to. The cerulean blue picks up very
easily and it was just looking real patchy and splotchy. Now looking at this later I thought
this actually is not that bad. I could probably salvage it. It would just have a little bit of a
different look. The brushwork would look a little different. And I have a few more hard edges and
it would probably be acceptable. But it's not what I wanted this time. I wanted the more cottony edges
and I wasn't getting them. So I think what I'll do is save this as a study to do on my own and see if
I can pull it together to an acceptable state. Different looking maybe but acceptable. I also
didn't like this swoosh here that dried like that. That looked very irregular. So I'm going to see
what I can do with it. But at any rate if you paint a lot of complex skies with a lot of interesting
clouds you're gonna have fails. Count on it. All right back to our regularly scheduled program.
All right this is nearly dry. It's still kind of damp but I'm just gonna wet it again with spray so
it doesn't have to be totally dry. It's dry enough that these won't back run. This time I'm gonna
re-wet the whole thing. I got my color mixed up. I'm gonna use a mister and again we're gonna
saturate the whole thing. The trick here is to protect these edges. So you may have to have a
tissue ready to stop that. And you want to be able to let this all come up in here. And I haven't
decided which brush I want to use. It's kind of more of a feel than it is a like a rule. That
oval wash I think was a little much. I want to bring an edge in here. So if you get an edge you can soften
it right away. Manage your flow and your edges with a little bit of tissue. I'm more or less just
floating these washes on here because I don't want to over brush that paper that wet paper under there.
I really prefer doing cloudscapes with arsh because it is so robust. But we'll make do.
That's nice like that. Yes I mean some of these things turn out to be happy accidents.
And you may do a lot of these before you land on something that's this great. I don't know that
this will be great but don't get frustrated and don't give up. I get a bit of a dry edge up there
so I'll soften it that way. I don't want to keep this edge here so I've got my handy tissue.
You can just kind of work your way around like that. It's a great way to practice water management
too. It just really is. If you feel like you're getting too much water but you've got a an effect
you know that you like and is working before you go on to another section just let it dry.
I lost that neat little edge but I'm starting to get some patchiness there that I didn't want.
Sprayed that. I got a danger of a backwash here. If I get one I'm not too worried about it. I'll
incorporate it somehow. But I'm still really pretty happy with the mix of soft and hard
edges going on here. All right I think I'm gonna have to let it dry again before I missed any other
areas. I'm just getting too much water on the paper. All right we're completely dry now so
let's re-wet it. It is important to dry it because you start building up too much water
and it just gets out of hand and you start creating backwashes and problems. And if I dry
it then I can come back to dry paper and spot wet it or mist it where I want to. So I'm going
to work this corner a little bit here. Soften that edge. You can always use your hand if you
want to mist certain spots. But I think once you've got paint on the paper it's just real important
not to brush it much. You know except where you're adding that a little bit of color.
You know the the way to get these these edges to light up as you get more into the solid part of
the shadowed part of the cloud you have a darker core. And then as they slide behind another cloud
they get darker back there and then they sort of enhance the edge that's in front of them. Probably
the biggest challenge here is just managing your wetness but also understanding where your paper is
how how wet your paper is because as it's drying it changes. And how the water moves and acts
changes and it finally gets to a point where if you add much you're going into danger territory.
You know if you look at this reference you just have to study the chaos. I mean there's beauty
and chaos at the same time. How the values you know ebb and flow. For the purposes of shading
ultimately you're looking at solid shapes. Okay everyone I think we're gonna stop it right here.
I'm pretty happy with it. I could continue to fiddle with this for probably another hour.
I really could deepen some of the core shadows even more. But we're gonna go with this and I
thank everybody for watching. I really appreciate it. Thank you for liking and subscribing. And
Patrons, so appreciate your support on this channel. And we'll see everybody in the next video. Bye-bye.
