Tote Bag Tutorial | Beginner Sewing Tutorial | Easy DIY Bag

Crafted Touch
14 followers
20 Video Views·Jun 19, 2025
I lovingly call this bag the Girlie Pop Tote because it's a simple tote with a fun twist. Features a front tie, elastic for easy access, and inner pockets. Beginner friendly, and no serger necessary.
Tag @hisydgraham in your finished makes!
Fabric Requirements:
~1.25 yards of main fabric
~1.25 yards of lining fabric
Pattern Pieces (detailed in video):
2 Bag Pieces - main fabric
2 Bag Pieces - lining fabric
Pocket bag - 17" x 10.5" (lining)
Strap - 30" x 3.5" (main)
2 Squares - 3" x 3"
4 Bias Strips - 24" x 1.25"
3/8" Wide Elastic - 15"
I love the project that we are going to make today. It's one of my favorites that I've ever done
and you don't need a sewing pattern for it. You're going to make all the pieces yourself because it's
really easy and straightforward. We're going to be making a tote bag but I like to call it the
girly pop tote because yeah it's a tote bag but it's a little bit more fun. It's a little more
out of the box and when you see it you don't think like oh that's just a basic tote. It's good. I
would say that this is a beginner friendly tutorial. Maybe confident beginner. If you've
literally never sewn anything in your life this might be like slightly adventurous but you could
definitely still give it a shot. If you've used a sewing machine before, you've sewn basic stuff,
you would have no problem with this one and you don't need a serger which is great. You're going
to need two different fabrics or you could do it from the same fabric but you need a main fabric
and then a lining fabric for the inside. For my main fabric I'm using this really pretty blue
gingham from the fabric store. It's giving Dorothy vibes a little bit but in like a good way. I'm
very excited about this one. So it's 100% cotton. It's a three ounce cotton so it's like pretty
thin, pretty loosey-goosey which while you're making your bag if you want a sturdier bag
definitely use a heavier fabric but for the main fabric I wouldn't go heavier than maybe like
a six or seven ounce fabric just because then there's like ties and when you're making the ties
that part could get a little tricky if the fabric is too bulky but at the same time this is a three
ounce fabric. I wouldn't want both my main and lining fabric to be this thin because then it's
going to be like very loosey-goosey which I don't really want. So for my lining fabric I had some
leftover nine ounce cotton twill. This is from Blackbird and it's just like a cream twill. For
the lining nine ounce is going to be totally fine. It'll give the bag a little bit of hidden structure
on the inside which I think is going to be great. So those are my fabrics, main fabric, lining fabric
and I'll show you all the pieces you need from each but you do need about one yard of each fabric.
One last note before we jump in, we are working with bias tape in this pattern. I've made so much
bias tape that at this point it's not daunting to me at all and I promise it's not hard but some
people see the word bias tape and get nervous so I'm just going to explain if you've never used
bias tape before. Essentially what it is is it's a strip of fabric that was cut on the bias.
The bias is at a 45 degree angle of the fabric and the reason you would want to do that is because
the bias is usually stretchier than like the 45 degree angle has a little bit more stretch to it
than just the straight across so you can kind of see it it like warps a little bit and that's what
we want. So we're going to be using bias tape both as a facing for the bag but also as the ties and
it's just a little bit easier to manipulate than straight across fabric as you're like pinning
things in curves and folding it to make the ties it's just a better way to cut it. So don't let
that make you nervous if you don't love bias tape we use a minimal amount of it and it's very very
easy. Okay I think that's it we're going to jump into construction but I cannot wait for you to
make this bag it's going to turn out so cute. We need to draft just one pattern piece for the bag
so start off with a rectangle 17 inches by 21 inches you can use any sort of paper I've just
taped together a few pieces of construction paper from my kids and then go ahead and fold that in
then at the top corner you're going to measure an inch and a half in and mark a line there
in the center you're going to mark a line nine inches down then you want to go in and connect
those two points with a curved line it does not have to be perfect by any means I just go in and
freehand it if you want some sort of guide you could use a bowl or a plate but it really isn't
that necessary to get it a perfect curve. Once that's marked cut the curve out and you have your
pattern piece. From that pattern piece you'll need to cut two from your main fabric, two from
your lining fabric, a pocket bag, strap, four strips of bias tape, two small squares, and then a little
strip of three-eighths inch wide elastic. All the measurements are there on your screen for you.
One thing to note about the strap the 30 inch length is what fits well on my body. If your
body is a different size than mine I would recommend measuring from just below your bust
to your mid-back and that should be your strap measurement. That may seem a little bit short but
trust me it will work out perfectly. Okay first up we are going to grab the pocket bag that was cut
from your lining fabric and we're going to fold the top edge down a quarter inch, press it, fold it
down a quarter inch again, press it again, and then we're going to stitch along that folded edge.
That should be just under a quarter inch seam allowance right along the edge of the fold.
Lay your pocket bag with the wrong side facing the right side of your lining and pin that in place
and then we are going to mark two dividing lines into this pocket bag to create three separate
pockets. Because this bag is 17 inches wide I marked my pocket at six inches, then the middle
pocket is five inches, and then the final pocket is six inches again. So I would make a mark at six
inches and 11 inches. You can see I marked the first marking with a pen because that will get
stuffed up into the seam allowance and then I didn't have any chalk handy so I just marked the
rest of them with pins and I'm going to kind of use the pins as guidelines as I'm sewing. So you
can see I started the pen marking, followed the pins up in a straight line, and then do a couple
little back stitches at the top of the pocket bag. And in the end you'll have three cute little
divided pockets. Now find your other bag piece from your lining and lay it face down right sides
together and pin it all the way around the edge. Then we're going to sew your linings together with
a half inch seam allowance starting at the top of one corner, sewing all the way down, pivoting at
the bottom, sewing along the bottom, pivoting again, and sewing up the other side. Then you'll want to
trim your corners to get rid of any bulk when you turn it inside out. Next you're going to press
those two side seams open flat with an iron, but when you go to press the bottom seams you're going
to fold both of your bottom corners into points, lining up the bottom seam and the side seams
perfectly. I like to flip my corners up and really feel in there with my fingers making sure those
side seams line up because you want them to be on perfectly and this is what it kind of should
look like once it's pinned. Once those corners are pressed and pinned you're going to lay them on a
flat surface and measure two inches up from the corner at a perpendicular angle and make a little
marking along the edge of the corner. That is where we're going to stitch along. Once you've stitched
along that line and backstitched really well you're going to snip that entire corner off. Don't
worry about finishing that seam because it will be all enclosed in the bag, but this is what your
lining looks like now that it's all finished. You can see your cute little pockets in there. Now
you're going to repeat that entire process minus the pocket with your main fabric and once that's
all finished you're going to flip the main fabric inside out. Don't flip the lining inside out
because you are going to shove your lining inside of your main bag. It may take a little bit of
finagling but just keep working with it pressing down into the corners until your lining lays
nicely inside of your main bag. Once it does you're going to pin all the way around the top
edge of your bag to keep it in place and then you're going to go in and baste stitch around
that top edge as well. If you've never basted anything before it's basically just the longest
stitch length on your machine. Your basting stitch should be very close to the edge. I would say at
about an eighth of an inch seam allowance and that will just help hold everything in place without
pins getting in the way. That's what your basting stitch should look like and now we get to move on
to buttonholes. I'm of course going to be walking through how my machine does buttonholes but if
your machine is very different and you've never done them before you can look up how to do them
on your machine. The first step in finding the buttonhole placement is to find the center of
the bag so find the side of the bag that does not have the pockets on the lining and fold it in half
and do a little snip in the center to find that center mark. I'm marking mine with the pen as well
so it's easy to see. Then from that center marking take a ruler and measure up three eighths of an
inch and then you want to make two markings half an inch apart so they'll be a quarter inch apart
from the center mark and half an inch apart from each other. That should look like this. Now I'm
going to take the buttonhole foot of my machine and make sure that the distance is lined up to
three eighths of an inch. Then I'll attach the buttonhole foot to my machine, make sure my
settings are on the correct stitch, and then I'm going to line up the first buttonhole marking
that I made right in the little window of the buttonhole foot. The process of sewing the
buttonholes is super simple. My hands are pretty much just loosely holding the fabric and I'm
keeping a steady pressure on the pedal and the machine just does the rest. Once those are all done
go in with a seam ripper and open them up being very careful that you're not seam ripping through
the buttonhole. Now we're going to move on to the strap so fold your strap in half right sides
together and stitch down the length at a quarter inch seam allowance. Then you're going to take a
large safety pin and pin it into the seam allowance of the strap and then turn the head of the safety
pin down into the channel of the strap and kind of push and pull and push and pull guiding the
safety pin all the way through the strap out the other end. Then you're going to press that finished
strap flat and I like to press it with the seam in the center. Set that strap aside for now and
then grab the two little squares that you cut. You're going to fold up the bottom edge of both
squares a quarter inch and press it. Now we're going to attach the strap to your bag so take
one end of your bag lay it flat grab your strap and lay it right side against the right side of
the bag and then take one of your little squares and lay the right side of that against this big
sandwich situation we have going on and pin it all together so your strap should be sandwiched
in between your square and your bag. This is what all that should look like and then you're going
to want to trim the edges of your square to kind of match up with the shape of the strap and the
Repeat that process on the other side so now you have two pinned together sandwiches and make sure
that your strap is not twisted. Okay now grab one of the bias strips that you cut and fold it in
half to find the center make a little baby notch there and do the same thing to your bag. Fold that
in half and make a notch as well and then you're going to line up those notches and pin them
together. Continue pinning that bias strip along the top edge of your bag and it should overlap
about a quarter inch up into your sandwich area. If it goes much farther than that it's totally
fine to trim it off but you don't want it to miss that sandwich you do want it to overlap I would
say at least a half of an inch. Repeat this process on the other side of the bag so that
both sides should have a bias facing pin all the way across the top edge looking like this. I know
there's a lot of pins going on at the moment but no worries we're going to get rid of them right
now. So starting at one end of the bag stitch along the top edge at a quarter inch seam allowance
and what you want to do is have a continuous stitch starting from that one end going all the
way across one edge up through the other end continuing across the strap and down through the
other end finishing where you started. This is what the ends of your bag should look like but
I will note I want my stitch to run right along the edge of where the strap comes in which you
can kind of see I can feel with like my thumbs there. It didn't quite hit where I wanted it to
so I just went back in with another stitch and sidled up against that strap. You're going to want
to trim up your corners with some scissors so that when we turn it inside out it's not quite
as bulky. Once you've done that grab your strap give it a little tug and that will pull the ends
of your bag inside out or right side out in this case. You may want to go in here with something
pointy. I just used my closed scissors and poked those corners through a little bit so they're not
quite so lumpy and they're a little more sharp. Then you're going to want to take your iron and
press those ends nice and flat. Now we're going to fold that bias facing over twice. First we're
going to fold it over a quarter inch and press it down and this can get a little bit tricky when
you go up toward your sandwich area but just go slow kind of push everything else out of the way
and get that fold in place and then you can go back later and kind of even everything out with
the iron so don't worry too much about squishing up your sandwich. Once you've folded your facing
a quarter inch you're going to fold it again at the seam so essentially from the front side of
the bag you won't be able to see the bias facing at all. Once you've double folded your facing
on both sides of the bag and really gone in there with the iron pressed it down nice and flat you're
going to want to pin that in place. And yes when I was originally putting my pins in I did the pins
facing out. Rookie mistake. I would definitely recommend them pointing in otherwise you're going
to stab yourself repeatedly. Now we're going to make two little dots up inside your sandwich
and this is going to mark where you want your stitch to start and end along the bias facing.
Because you'll be a little bit blind going up in there you won't quite be sure when you've gone
far enough into the sandwich so this will kind of help guide you. Those two little dots should
be about three eighths of an inch up into your sandwich area. Okay we are going to edge stitch
along the bias binding on one side of your bag. So start at one of the dots that you just made,
slide that under your presser foot, start there and then go all the way along that top edge of
your bag stitching pretty close to the edge of the bias binding. When you get to the other end
of your bag slow down a little bit, lift your little sandwich flap up, find the mark that you
marked and end your stitch there. So this is what the finished product should look like. Repeat that
process on the other side and one thing to keep an eye on is to make sure that you don't stitch over
your button holes. Now we are going to make the ties. So take the two remaining strips of bias
tape that you cut earlier and we're going to start off by folding them first in half or just folding
them like traditional bias tape. So if you've never done that before start by folding it in half
then take the bottom edge and fold it up toward the center and then the top edge and fold it down
toward the center. So essentially you folded it in four quarters with the raw edge sealed within the
center of the bias tape. This is what that should look like all folded and pressed and then we're
going to stitch along the entire edge of those ties. Once that's all stitched up beautifully
we are going to slide it inside of our bag. So attach a small safety pin to one end and then
lift up your elusive sandwich flap once again and slide that safety pin down into the channel and
make sure this is on the side of the bag that has the buttonhole openings. So push that safety pin
through, push pull, push pull all the way through until it comes out one side of the buttonhole.
Gently pull that tie through until the end of the tie lines up with the end of the bias binding.
Be very careful so that the tie doesn't get sucked into the channel otherwise you'll have to start
over and then pin that in place. Repeat this process with the other tie and then I just finish
my ties off by tying the end of them. We are so close to being done you guys, you pretty much just
need to put the elastic in. So very similar process to the ties, you're going to slide the elastic in
with the safety pin attached to one end, kind of push pull, push pull again and really really be
sure with the elastic that it doesn't get sucked into the channel. So once you're kind of nearing
the end of that elastic matching up to the end of the bias binding, pin that in place. I double
pin my elastic just to make sure it doesn't slip out and then continue to pull the elastic through
the other side and pin that in place as well. So once we have our ties and our elastic all pinned
in place we are going to go ahead and top stitch around our little sandwich area. We want to top
stitch pretty close to the edge, I would say at about an eighth of an inch seam allowance, although
on the bottom edge I go a little bit further up, maybe a quarter inch seam allowance. This is what
the top stitching should look like when it's all done and at this point your bag is finished. I did
add a little something extra to my bag because I had this cute tag that I got from Blackbird Fabrics
and I felt like the bag could use just something a little extra on the outside. So I pinned that tag
to the bottom right hand corner and top stitched around the edge of it and I think it's cute. I
really like how it turned out. All that's left to do now is tie those front ties off into a bow
and that is it. Now your bag is all finished and I am obsessed with this gingham fabric. It turned
out so cute and I love the inside lining. It's a nine ounce cotton twill on the inside so definitely
a pretty thick lining but I love that it gives it like it has a really solid structure. I feel
like it gives it a really good shape. Yeah, it's so cute. Wait, I love it. Yep, this is the bag.
So you can see the straps like we talked about. The straps like end here but then the bag kind
of has like part of the strap in it so it should sit about like I feel like this is a comfortable
distance to like reach into the bag. I can touch the bottom, I can reach into all the pockets and
everything. There's tons of space in there but it's like sneaky little and cute. If you end up
making one and you post about it on Instagram, TikTok, whatever, tag me because I love seeing people
make things for my tutorials so I would love to see that and I'll link the fabrics that I used
and I'll link like all my go-to sewing supplies as well. I feel like I have a lot of favorite tools
so check that out as well and let me know what we should make next. I love when people send me
pictures of things that they found like on Pinterest or wherever and want me to like
re-deconstruct and recreate it so send me info of what projects we should make next. Okay, I love it.
It's so cute.
