If you're new here, thanks for stopping
by. Today, I'm going to show you how to
build a riser. My intention's been to
lower the barrier to entry to bow making
and archery for those who are
interested. And with that mission, it's
led me to do different forms of content
to help people. This right here is video
three of a six or seven video series on
how to build this awesome three-piece
wood takedown bow. So, to add as much
value as possible, I wrote an
instructional book on how to build this.
Today, we're covering riser profile and
shaping. This book is the step by step
with a ton of photos, infographics with
measurements. It breaks it down to make
it easy. Not necessary. You could build
this bow from these videos. Want to give
the option of both. Shatterproof Archery
also has a kit of how to build this bow.
Links in the description. That's my
pitch. If you want this stuff, I'm here
to give it to you. If you don't want it,
enjoy this video on how to shape the
riser.
Hey guys, great news. I got one limb,
two limb curing. Now, with the Typon 3,
it only has to sit for an hour and then
you can work with it. You just don't
want to stress it for 24 hours. This has
been sitting for 4 hours. So, we're
going to go ahead and take the riser and
start building it as the limbs cure.
I've tested out a bunch of different
riser designs, and here's some. This one
here, this one, this one, this one, this
one, this one. But this one is the one I
really like. And we're carrying these
principles to this. This one's the same
as well. So, I drew this to help you
out. But you'll notice I've got some red
lines and then two blue lines. We're
going to pay attention to the blue
lines. On one side of our block, it's
going to be flat. And you'll see this
bottom side. It'll be flat all the way
across. So, we can measure from this
flat line. We're going to come 1 in up
here, 1 and 1/2 in up here. It's going
to be 3 in along that bottom line where
this mark comes up. That's going to
establish the proper angle for the limb
to come off the riser. That's all the
importance. 1 and 1/2 three. I have
built this two different ways. One is
with a 16-in length. The other is with a
14-inch length. You can do whatever you
would prefer. These shapes are up to
you. Something I like to do is that the
depth of the handle is going to be in
line with where the limb comes off the
riser. So if you put a straight edge
across, you'll see right coming into the
depth of the handle is right where the
limbs are coming out. That's going to
make sure that this style of bow is
extra smooth. So we've got our block.
Let's flatten one side first.
3 in one one and a half.
The last thing I did not mention is
where to make the center line. So at 7
in, that's my center. I'm going to go
ahead and draw this across. What do we
want the center to be? You could make
the center the arrow shelf, but what
works for the smoothest shooting bow is
to make the center the deepest part of
the throat of the handle. So, I can take
these marks like we discussed earlier.
And now I know I want the handle deepest
part to be right in there. And I'm okay
with it going a little further that way.
So, I'll go about a/4 inch further in
this way. Okay. So that is the deepest
part of the handle, which means the
arrow rest is going to be above it,
which means I'm just going to kind of
eyeball how I would want that handle to
feel. Now, this might not look like
anything to you, but let's bring this
out this way because we're going to have
more of a forward- facing handle like
that. These curves don't have to be
precise. It's just personal preference.
So, you can take your time as you remove
material. I've done this design so many
times, I can eyeball it, and I know what
to look for and what to avoid. The other
thing to notice on the layout is I
purposely did this to where this chunk
that's chipped out is over here where
I'm not going to use that material. So,
take a look at your board. Make sure if
there is any imperfections or any knots
you want to avoid. You want to take out
this, this, and this. If this is
overwhelming or feels overly
complicated, I totally get that. That's
how I felt when I first started building
these. A first project before that could
be a flat one. So, you can mount your
limb directly flat here and not even do
any reflex in the limb, but make the
limb flat like I did here. And then you
can tiller it as normal. It's a
different design. I don't think it
performs as good as this one. But if you
want to do multiple projects, it's
definitely a fun one. And it still
shoots pretty stinking good. Now, with
your choice of tools, remove everything
you need.
[Music]
[Music]
Heat. Hey, heat. Hey, heat.
[Music]
Heat.
[Music]
Heat.
[Music]
[Music]
Now, here's an idea to make a cool
looking riser, or at least a different
looking riser. So, I'm taking one of my
hickory risers, but I'm going to torch
it. Any propane torch will work. But
before you torch it, it's important to
get the riser to the exact shape you
want, cuz we're not really going to
change the shape after we darken it. How
I do this is I go ahead and char the
entire piece. And then after it's
charred, fairly dark, I will use 220
grit sandpaper to sand off as much as I
want or as little as I want for the look
I'm going for. This gives it a nice
unique look. I really like how it turns
out and it's a fun way to give a
different look to a light colored
material. So, when shaping a riser,
there's a wide variability of
preferences, but one principle that I
have found true for most people is that
most of us like this to come backwards.
That allows you to grab the riser and
roll your wrist up a little bit and find
that very comfortable. So, with this
style, we're having a forward- facing
handle and we're rolling that back side
over. Everything else as far as the
exact curvature here is going to feel
better depending on your hand size and
how you grip the bow. Also, there's a
point right in this area that a lot of
people find that the meat of their
thumb, if you got a big meaty thumb,
kind of like I do, uh it it can indent
there. So, when I'm finishing the riser,
I'll put my hand on it and really get a
good feel of it. And sometimes I'll even
string the bow and shoot it and see
where there's undo pressure on my hand,
where it's like, eh, that doesn't feel
the best. Then you just go in there with
an orbital sander or a rasp to clean
that up. And in the end, you end up with
a really nice, clean riser.