My Motorcycle's Chain Keeps Rusting- Let's Fix It

Two-Wheeler Technology
5 followers
4 Video ViewsยทJun 17, 2025
My Motorcycle's Chain Keeps Rusting- Let's Fix It
My MT-09 has a condition. It's called rusty chain. It's pretty common among old abandoned bikes,
but apparently these younger and sexier models can contract it too.
I tried my best to hide it from you guys, but it didn't take long for you to notice.
At first, I was defensive. That video wasn't even about my chain. You're supposed to watch
the video, not inspect every frame. It's my chain. I can treat it however I want.
But the truth is, I was just lashing out, because I'm sensitive about my rusty chain.
I mean, I love cleaning all things bike related. Helmets, paint, brakes, even chains.
I just don't know where it all went so wrong.
Do you think they'll buy that? Did I come across as sincere?
Okay, but in all seriousness, my chain is currently in a rather sad state.
And before I try to slide into DID's DMs again and beg for a new one,
as fun as that is to say, I think I'm going to try to save this one first.
After all, rust definitely doesn't improve the chance of it snapping,
especially when it's attached to the master of torque.
I have given it a half-hearted attempt in the past,
but finding the culprit took longer than it should have.
I figured I was just drying the bike badly after washing it,
or not rinsing the bike cleaners off of the chain well enough, and that was causing the rust.
So I dried it and rinsed it better.
But that didn't make a difference.
So then I thought I might be taking too long to lube the chain up after washing the bike,
and leaving it uncoated for too long.
So again, I started to lube the chain up right after drying it.
But that didn't help either.
But then we had 40 days and 40 nights of non-stop rain,
and I realized that was the cause.
The rain.
You see, my poor bike lives outside.
It does of course have a bike cover, but not even that can stop 40 days and 40 nights of rain.
According to science, only an ark can.
And that makes complete sense, because all of my bikes go through the same washing routine,
but yet the two that live in my workshop have rust-free chains.
But I love having my MT-09 at my house.
I ride it almost every single day.
Unfortunately, I don't have a garage at my house,
but if I kept it here, I wouldn't ride it or enjoy it nearly as much as I do now.
So the rust is more stubborn than you'd expect.
I assumed some bike cleaner and a normal chain brush would get it off fairly easily.
Its plastic bristles might be kind on the o-rings,
and it seems to get enough rust off to make the foam orange,
but after a quick rinse, it hadn't changed much.
Hence why the rust is still here.
I clean the chain like this every time I wash the bike, but it doesn't seem to be enough.
So let's go upper level.
We'll try a wire brush, since they're often used to get rust off steel.
But maybe a more appropriately sized wire brush.
Fortunately, it's not like this around the whole chain, just in patches.
You can see how well the wire brush agitates the rust here by just how orange the foam gets.
I was sure I had found the perfect solution.
Of course, I don't want to damage my o-rings,
but luckily, the rust is mostly on the side of the links,
so we can keep our distance from the o-rings.
However, after another quick rinse, I was rather disappointed.
It took a fair bit of the rust off,
but it wasn't nearly what I wanted or the sparkly chain I had imagined.
But I didn't give up.
It seemed to work, just very slowly.
So I hoped a few more passes would get rid of the rest.
And after three more passes, the foam was still slightly orange from the rust.
So it must still be working, but not anytime soon.
I think it's time for another approach.
I'm almost ready to accept that my chain is just too far gone and that I need a new one,
which is fine because I love buying new bike parts.
But after actually googling it, I see a lot of people suggest WD-40 and some steel wool.
It doesn't hurt to try, I guess.
It's not like my chain can get any worse.
So this time I drenched my chain in WD-40 and let it soak for a few minutes.
I then sprayed some WD-40 on some steel wool and went to work on the chain once again.
It also got a bit more rust and grime off of my chain,
but ultimately didn't make any real improvement.
If I show you my chain from over there now,
it undoubtedly does look a lot better than when we started.
But we both know that if I brought you closer, the illusion would fall apart.
After trying three different cleaning methods, I can safely say that the rust is completely gone.
However, there's now pitting left behind from the rust,
and the only way to fix that is to replace the chain.
All three of these methods did technically make a difference,
but if I had to recommend one for your rusty chain,
I think the WD-40 and steel wool combination would be the most effective for the least effort.
I can see it working.
My chain is just too far gone.
If I'd done it sooner, I would have been fine.
But anyway, let me know if you have any more tips to clean up a rusty chain,
or to prevent it in the first place.
And I guess there's only one thing left to do today.
