We turned leftover leatherette scraps into $$$ with our LogoJet UV printer and Aeon Nova 14 laser! 💰 In this week’s video, we walk you through a complete print-and-cut workflow—from Illustrator file setup to laser cutting, and finally pressing on hats using the Lone Star Adhesive branding iron hat press. K&G Make It Craft Studio Hat – Leatherette Patch Edition: https://kandgmakeit.com/collections/clothing/products/k-g-make-it-craft-studio-hat-leatherette-patch-edition
We’re showing you how to: ✅ Design print-and-cut patches in Illustrator ✅ UV print directly onto white leatherette ✅ Cut perfectly aligned shapes with LightBurn ✅ Press pro-quality hat patches at home ✅ Sell custom hats for big profits at craft shows!
🧢 Cost to make? Just under $9. 💸 Sale price? Around $25 each. ⚡ That’s a great markup—and we’re giving you the whole process start to finish!
🚨 Don’t miss: At [00:03:00] we show how to create precise cut files At [00:14:00] we walk through LightBurn’s print-and-cut wizard At [00:18:00] we demo the dual-platen hat press from Lone Star At [00:20:00] we break down the profit math—this is cash-in-hand merch!
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
We just took our Lone Star
adhesive leather scraps
and turned them into cash
by making some merch that we can sell.
We're going to use our Logo Jet
UV printer and our Eon Nova 14 laser
to do a print and cut
that print and cuts cash.
And we'll show you exactly
how we did it right now.
What is up?
Welcome back.
Do you like to do a build it or make it?
So do we.
Last week, we had our jamboree.
And if you missed it,
you missed a jam.
One of the sessions
that our campers got to attend
was with Josh from Lone Star Adhesive,
where he made some hat patches
using both the tricolor acrylic
and the leatherette.
And he was using that new bomb ass
little hat press.
He's got the what is it?
The iron, the branding iron.
I think it's cool.
And when the dust settled,
we found some.
Scrap leatherette here,
and what we found was this leatherette
was pretty cool
because you can print directly on it.
This is one of the sessions
that the campers learned.
So we thought we would show you.
Yes.
One of the sessions
that you might have missed at the jamboree.
So we found this leatherette.
This is white.
This is bright white.
So you can print directly
on this leatherette and cut from it.
And it already has the adhesive on the back.
There you go.
So that you can just print
press it directly to your hat.
So today we're going to go ahead
and print some of our own logos
on this scrap using our new UV printer,
our new logo jet printer.
And then we'll bring it over
to the Eon Nova 14
and do a print and cut
and cut out our patches.
It's like printing
and cutting your own money.
It is a little like that.
And we're going to show you
exactly how we created the print and cut too.
So you're going to learn a lot in this video.
Step one, we're going to gather
all of our supplies.
We needed some hats
because that's what we're making.
We're making hats, some hat patches.
These are the Richardson 112s.
We got these from Lone Star Adhesive also.
These are good quality hats.
I had it my way.
We have a bunch of flat bills,
but these will do.
These are the most popular hats.
So that's what we're doing.
We also needed some of that
bright white leatherette.
This is part of that Heritage Collection.
I like the bright white
because we don't have to use any white
under base when we go to do our prints.
Right.
We're just going to print color and cut it.
It already has the adhesive
on the back like we shared.
So it makes it super, super easy.
And that is it.
Step two, we're going to make our print
and cut files.
I'm going to jump over to Illustrator
and show you how easy it is
to make your print and cut files.
Here we are in Illustrator.
We're going to start with a new file
from a template.
I like to use one that I use
for desktop lasers.
So this just brings it in with my desktop
laser size as my artboard.
And I have my swatches and everything.
Now we're going to grab
one of our hat patches.
I made a bunch of hat patches
for her to pick from.
But she really likes this one.
I really like this one.
But you know, happy white.
So we're going to go with this guy.
It comes in at 6.4 inches tall.
That is a big hat.
That's a hat wrap.
That's not what we're doing today.
Not what we're doing.
So with the aspect ratio locked,
we're going to take this down to 2.5.
That is a reasonable hat patch.
There we go.
I have a lot of room in here.
And so that I know what size
my leatherette actually is.
So I want to make a couple of these.
I'm going to change my artboard size.
I'm going to click my artboard tool.
I'm not going to try to drag it.
Just going to come over here
with the aspect ratio unlocked.
Now we have about 11.5 inches of leatherette.
So I'm just going to say 11 inches.
And then it's 12 high.
So here's my new artboard.
That should tell me about
how much room I have to place on my artboard.
This is a great looking image,
but I need to make a cut file for this piece.
And I want to give it a little buffer,
like an offset.
Now, you don't have to embed the image here.
You can just leave it like this.
Yeah, I'm just leaving it linked
because I'm going to export it.
OK.
So to make my offset for this guy,
I'm going to copy him.
I'm going to paste one right back over top.
I'm going to say control shift V,
which placed an image right over top of the image.
Now I'll drag it to the side.
There it is.
Control Z will put it right back.
If I check my layers,
I should see two linked files.
I'm going to hide the bottom one
to keep it nice and safe
so I don't mess it up.
Now I'm going to go...
Yeah, pro tip.
You can see.
I'm going to go to window.
I'm going to open up my image trace.
These are in alphabetical order.
Window trace.
I have my image trace window open.
I'm going to click on my PNG.
I like to use the silhouette presets.
This is nice and easy.
It picks up everything that's not white
and turns it black.
Give it a minute.
If you don't see all of your black,
you can mess with your threshold.
You see too much black,
you can bring it down.
And if you see too much white,
you can bring this up.
Now mine's pretty easy.
Basic black and white.
We'll hit expand.
I'm going to go up to my window
and open my pathfinder tool.
My pathfinder tool is actually
in my properties menu.
My properties panel.
I'm going to unite everything.
Just in case.
And again, I need an offset
to this thing.
So I'll go object.
Path.
Offset path.
Now this is giving me my default.
Point one three eight nine.
Which looks fine to me.
So I'm going to keep it.
But you can adjust that offset here.
Now yes, that looks like a mess.
Looks like a mess only because.
It's given an offset to each one
of those little objects.
Now if you initially do this
and it looks jagged like you see
some of these jagged edges here.
You can mess with your joints.
You can go round mitered bevel.
Bevel gives you that.
I like round especially when I'm
doing a print and cut.
So I get a little smoother cut.
So we'll go round.
And say OK.
I'm going to grab everything just
to make sure everything's captured
here.
I'm going to go back to my
pathfinder tool.
Again, mine's on my properties tab.
I'm going to unite everything.
Let's go to my layers to make sure
everything got captured.
Yep, I have one path.
I'm going to use the fill on this
path.
And I'm going to give this path a
red stroke because I used red
for my cuts.
Now we can bring back my original
image.
I gave it a little buffer.
Got the image in there.
I want to make a couple of these
guys.
Let's see how many we can fit on the
board.
So I'm going to grab everything.
I'm going to say
Ctrl-Z.
Ctrl-Shift-V.
I'll paste it right back into place.
I'm going to start to move it and
hold shift.
So it'll stay on this axis.
And I'll just get it placed.
And get a little closer.
Now if this were just an object, you
could use a grid pattern.
But because this is an image, you
can't. So you have to do this.
Copy, paste.
Yeah, if I tried to use repeat right
now, it's not going to let me.
It's grayed out.
Because it's an image.
If I just select my path.
And I try to go to repeat.
It'll totally let me.
That image is throwing us off.
So I'm having to.
So I'm having to use Ctrl-C
for copy.
I'm just going to select both of these.
Copy.
Paste them in place.
Drag them over.
Hold the shift key.
Now.
Now that I have these two spaced out.
These two should snap to the same
space distance.
Grab all of these.
Copy.
Ctrl-C, paste in place.
Drag them down.
Grab all of these guys.
Copy, Ctrl-C, paste in place.
Drag them down.
All right, I have my cut
file almost done.
But now it's looking like a mess.
And I don't know how to line up my
laser.
So I'm going to make a few more
layers here.
We'll call this layer.
This is my regular layer.
The layer that's been here.
We're going to call this one.
I'm going to say new layer.
Say cut.
And one more new layer.
And this I'm going to use for my
registration.
Now, I want to get all of these cut
paths on my cut layer.
I'm going to select one of these
cut paths.
I'm going to select.
Same appearance.
I should have grabbed all the ones
that have the exact same fill
and stroke as the one that I selected.
I'm going to say cut.
Ctrl-X.
I'm going to go make sure my
cut layer is highlighted.
I'm going to say Ctrl-Shift-V.
Put it right back where it was.
Right back into place.
Just on a new layer.
And now I'm able to hide each of
these layers.
I can hide the cut path.
And just have my print.
And I can hide my print and just have
my cut.
But I need to line both of these up.
I need to line my print and cut up.
I'm going to make sure I'm on
my reg marks layer.
And let's draw some registration
marks.
I'm going to start with a line.
I'm just going to make a
half inch line.
0.5.
Grab this.
Ctrl-C.
Ctrl-Shift-V.
Paste it right back into place.
Once I get my little rotation tool.
I'm going to grab it and start to
rotate and hold shift.
Just to lock it on the 45s.
I'm going to draw a little circle.
Right around them.
Grab all of these guys.
Grab all these guys.
Align center.
I'm going to use a color.
It's easy to see with that red dot
pointer.
Use red. It's going to be really hard
to see that and it will translate
it as a cut.
If you use blue, it's still hard
to see.
I found if you use like a
lime green.
Your red dot's pretty easy to see.
And so is the pulse when you try to
pulse it.
Try to use a lighter color.
For your registration marks.
So I've made one up in the top
left.
I'm going to copy this guy.
Copy.
Paste.
And I'm going to put one in the
bottom right.
That way I'm going to use these guys.
On the laser to kind of line up
my cut.
From here I'm going to say.
Hide my cut.
And we'll.
Export.
As.
I'm going to hide my print.
And show my cut.
And now we're going to export this.
As an SVG.
Both exports will have the
registration marks on them.
We want them to be the same.
Right.
And you'll notice I didn't even
mess with my registration mark
layer. I left it visible both
times.
It should show up in both
files.
Step three.
Time to make our prints.
We have our bright white
leatherette ready to go over
here at the Logojet UV printer.
I'm going to show you a couple
settings of how quick and easy it
is to set up your file and we'll
make our prints.
Here we are in the Logojet
software.
I'll show you just how easy it is
to set up a file.
The first thing I did was open
and double click on my PNG
for my hat patch.
It's already here.
The next thing I'm going to do is
open my layout.
Double click. It's now where my
leather is positioned on
the bed.
I'm going to give it a little bit
of spacing over here.
And.
I know I'm only doing color.
So I'm already set up to do color
only.
And I am ready to go.
Four.
Time to make our cuts.
We're going to jump into Lightburn
and I'm going to show you how easy
print and cut really is.
Inside Lightburn, we're going to
grab that SVG that we just
exported from Adobe Illustrator.
We're going to make sure that
everything is ungrouped.
But we do need to group our
registration marks because how the
print and cut works is
it's going to look for the center
of this object.
So you want to line up the print
head or your laser head
with the center of these
registration marks.
So we're going to make sure these
are grouped together.
Now I'm going to grab this first
registration mark.
I'm going to come to laser tools.
We'll start the wizard of print and
cut.
Now, once I have this going, I'm
going to now go out, place my
material in the laser
and I'm going to line up my red dot
pointer with
the center of this registration
mark.
Once I think I have it, the
red dot pointer in the center of
the registration mark.
I'm then going to go
and pulse my laser
a few times, trying to make sure I
have the exact center
of those registration marks.
You're going to have to tweak and
move your head a little bit.
I brought my speed down to one
millimeter per second and I'm just
tapping the buttons, trying to find
the center of that registration
mark with my pulse.
Now, once we found the center of our
registration mark and we have it all
set, I'm going to leave my laser head
over that registration mark.
I'm coming back into the software
and I'm going to set position
one.
And once I set position one, you'll
see that it's now highlighted with a
red ring.
Now it's looking for a position two.
So I'm going to highlight position
two and just grab
it. I'm going to start off by
jogging to that selection.
Now it should get close.
And if it's not perfect, I'm
now going to go back to my keypad
and I'm going to use the keypad
and get what I think is in the
center of that registration mark.
Now I'm going to pulse it until
I find the direct center of that
registration mark.
Once I have that center, I'm going to
leave the laser head there.
I'm coming back into the software
and I'm going to set position
two.
Now it's going to ask if I want to
scale my outputs or
align with no scaling.
And because I printed everything
with the same
aspect ratio.
Because my print and my cut were
both exported and I didn't modify
them at all, I'm going to go with no
scaling.
Right now, you'll see over here on
the laser area, you'll see ready
print and cut unscaled.
So we're ready to go.
Now, before I start doing any
of this stuff, I'm going to set my.
My speed and power.
So I'm going to use I'm
going to use 40 speed
and I'm going to use 45
power.
And we'll say, OK, and now for
my green, I don't need those to come
out at all. So I'll just say no
output.
I'll make sure my cuts
are selected and
we'll send it over to the laser.
Step five, time
to press them.
We're going to press them real good.
We're going to use our Lone Star
adhesive branding iron hot press.
So this is a dual platen hat press.
It means it's heated at the top and
heated at the bottom.
So both sides have heat on them
and it has a ridge on the bottom
platen that the rim
of the hat fits right onto.
And then it has a lever down here,
right? It's perfect, like
nice and snug.
Then there's this lever right here
that you snap in and
it keeps your hat nice and
tight.
Now, let's make sure we're centered
here.
We're going to place our
first, I'm going to remove the
backer.
That was a big thing at the
Jamboree.
Remove the backer and then
line it up on the hat.
This is great because it's got a
little piece at the top and bottom.
We're just going to keep our finger
in the center.
Add one of these little latex
pieces, a little rubber mat,
right over top.
Making sure not to move the hat.
Don't move the hat.
And we're just going in at 280
for 45 seconds.
Now, this is attached
with a magnet right now, so it is
clamped down tight and then
it will auto release at the end of
the 45 seconds.
I really like this lever here.
I think that was the thing that was
really missing on ours to keep it
tight.
We're trying to stuff T-shirts and
everything in there to try to keep
it tight.
I can't say enough about
the lever piece.
I also like the little lid.
That's custom designed, I think,
Josh. Yeah.
Yeah. He worked with the
manufacturer to customize
this press
to work perfectly with the hats.
I think he saw the pain point
everybody was having with the same
type of heat press that we were
using.
It would get wrinkly.
It was all center.
It just wouldn't attach and adhere
perfectly to the
hat.
Release my lever.
Pop my hat out.
Step six.
Profit.
So each hat is about eight bucks.
We figured if we were able
to fit 24
patches on a fifteen
dollar sheet, that makes
each patch about sixty three
cents.
And then we think it's about three
cents in ink for each patch.
Yeah. So you're looking at like
sixty six cents for the patch.
Eight dollars ish for the hat.
So for under nine bucks,
you got yourself a hat.
I think you could easily sell these
for twenty five bucks a piece.
That's a pretty good chunk of
change.
And we will have these in our
store. So if you are interested in
one of the K&G hats, they'll
be in our store at twenty five
dollars each.
But you can use your patron
discount code to save yourself
twenty percent.
And while I'm here
with my advertising,
we are a Lone Star affiliate.
So if you use KGMakeit10,
you can save 10 percent on your
Lone Star order.
So that'll make your hat and patches
a little bit cheaper.
I think the whole project was super
easy.
Making the cut file easy.
Printing super easy.
Print and cut was a lot easier than
you thought, wasn't it?
Yeah. A lot easier than you thought.
And then pressing it with that heat
press, that branding iron.
Super easy.
I know you want to do what I want to
do and do a whole
hat bar at a craft show
where they can pick their patch.
They can pick their hat.
You press it right then and there
with your branding iron and
they can take a custom hat home with
them. I really want to.
Yes.
I think I just got chills.
All right. Well, I am about out
of time.
I got to go make a bunch more hats.
You got to go pick yourself up some
hats to make because
easy profit.
And I like to say a big thanks
to the Make It Mafia.
We love you guys. That is the
easiest way to support this channel.
And I got to see most
of the Make It Mafia at the Jamboree.
I love it.
That was amazing.
I love getting to meet everybody.
And I cannot wait until next year's
Jamboree.
Bigger and better.