Gear I Use for Solo Filmmaking With Julien Jarry

Studio Solution
24 followers
#Education#filmmaker #teachnic filmmaker
So as a one-man band, you're gonna want a key light,
you're gonna need some gaff tape,
at least one cinema body,
pair of headphones, spare batteries, media.
You are definitely gonna need some extension cords.
But all this other stuff, you might need.
Hey everyone, and welcome to the Adorama Cinema channel.
My name is Julian, and today I'm gonna be walking you
through what gear it takes to be a one-man band.
So let's jump in.
Before I do, I just wanna say that I fully understand
that not everybody is going to just be able
to start out with all this gear.
15 years ago, I bought myself a camera
and I started out with photography.
One camera and one lens, and I slowly built from there.
There's no real perfect formula
of what you should get next.
It's really for you to decide based off
of the problems you find on set.
So pick and choose, decide what's right for you,
and I hope this video helps.
So as a one-man band, you might be going
from corporate, documentaries, commercials, to events.
Starting with cameras, I have the FX6.
It's a cinema camera with built-in ND filters
and XLR inputs, and I really recommend having
at least one cinema body.
Those features that I just mentioned are really invaluable.
To pair with that, I have a Sony A7C Mark II here.
It's a hybrid camera, and as a one-man band,
you might be, more often than not, expected
or asked by your clients to take stills.
And this is a really great camera for video and for stills.
The B camera here, the A7C II,
does not have internal ND filters,
so we have a variable ND filter here.
For lenses, I have two zooms.
This is a 28-70, 70-200, just gets so much stuff done.
If you're just starting out, or of course,
with run-and-gun footage, you're probably gonna be
going handheld, but you might eventually need
to buy a tripod.
We have a pretty high-end Sattler Flowtech tripod here,
and then I have a travel tripod.
Moving on to audio, I've actually made a video
on the channel all about my audio workflow,
so if you wanna know more about audio,
go check that out.
This is a Sennheiser 8060 shotgun microphone
connected to a boom pole, and then we have an XLR cable
that's gonna go directly into the FX6.
Another audio solution are these 2.4 gigahertz systems
that you've seen.
This is the Sennheiser Profile Wireless.
What's cool about these is that they actually
have a thread on them, so you can connect
the higher-quality lavalier microphone.
I've really enjoyed using these smaller 2.4 gigahertz
systems to pop in front of plants,
or put in between two people.
It's incredible what these things can pick up.
You always need a pair of headphones to monitor your audio.
Nothing more to say about that.
Moving on to lights, you're gonna want a key light
to light your subject.
This is an Aputure 600D, and I remember back in the day
when I started, I had no-name brand panels,
and I was aiming for that 120D.
It took a couple years to acquire,
but I eventually got the 120D, a small light dome,
and that was my workhorse for years.
It was awesome.
This is a really powerful light, 600D, daylight balanced.
And right here, I have the large light dome.
This is a two-foot tube light, and this could be used
as a hair light or a back light if you're doing products.
Really nice to add color to a scene or a rim to a subject.
You're gonna need stands to put all these on.
These are C-stands.
You might think it's a little expensive at first,
but you're honestly going to have it for your entire life.
Finally, as far as lighting here is concerned,
this is called a floppy cutter,
and specifically, this is the math bounce.
Not only can it cut light away from a stray window
or something like that, but the white side
can also bounce light back in and fill a subject.
Whether you're shooting product, commercial, or interviews
and you need a fill, this is the way to go.
And on the other side, it's black.
So this is called neg fill, and it's really going
to remove light from a subject's face, adding contrast.
I made a video here on the Adorama Cinema channel
called Mastering the Interview Setup.
I show you a A-B comparison on what this negative fill does.
And moving on to little bips and bobs.
This is on a cart.
So here, I've just laid out a bunch of things
that are also a part of my essentials kit.
Spare batteries, media, a small light like this Aputure MC.
When shooting events and running around,
a bag is really, really useful.
You put your camera and lens in there
while you wield the other one.
This is a blower.
You have to keep your stuff clean.
Tools are really important.
You've got to be able to put on and off tripod plates,
potentially fix and tighten screws that might get loose.
This is a DJI Pocket 3.
I've used this to get wide establishing shots
or cutaways of a exterior of a building.
In the last number of months,
I've become a firm believer that this little guy
can replace a super wide lens on a gimbal in good light.
This is an EZ-Rig.
It's an EZ-Rig Mini Max to be specific.
And I put this on to handhold a heavier cinema camera.
It takes the weight off of my back and puts it on my hips.
And this gimbal, I'm not using it every single shoot,
but when a client asks for a specific gimbal shot,
you're probably going to want to pick one of these up.
Coming down here, I've got some buckets
full of just a little more bips and bobs.
You're going to need some gaff tape.
You can solve a lot of problems
with a single roll of gaff tape.
Some grip parts like grip heads, cartelini clamps,
those are things you might want to get down the road.
You are definitely going to need some extension cords.
But all this other stuff are things
that you're going to potentially learn in the future
that you might need.
You might run into a problem on set
and come back home that day and go,
hey, I could really use another floppy cutter.
And that's really what's going to end up happening
as time goes on.
I really hope this video gave you some insight
into what I value most when I go out as a one-man band.
If you have any questions, leave them in the comments below.
As always, keep shooting, have fun,
and I'll see you in the next one.
