How Cinematographers Set Their Exposure

Studio Solution
24 followers
Aug 10, 2025ย ย #Education #teachnic
#Education#filmmaker #teachnic filmmaker
Comments are disabled for this video.
You've no doubt seen how some movies look darker than others.
Comedies may be bright and colourful, while dramatic crime films may be dark and moody.
This is to a large part determined by how cinematographers set their exposure,
the level of brightness across a frame.
Although it may seem simple on the surface,
being able to expose properly is one of the most crucial skills that every cinematographer needs.
Exposure is determined by 6 factors.
The sensor's sensitivity or ISO,
the shutter speed,
the lens's aperture,
the frame rate,
ND filters
and of course the overall amount of light in the scene that is being photographed.
Before we talk about how to get to the correct exposure,
it's important to be aware of a few terms.
The amount of light present in an image will almost never be completely even across the whole frame.
Part of the job of the cinematographer is to use lighting
to create different pockets of light and shadow in an image called contrast.
Sometimes that contrast might be light, other times it may be strong.
The difference between the brightest and darkest part of the image is called the contrast ratio.
Traditionally in cinematography this refers to the difference in illumination
between the brightness of the key light and the brightness of the fill.
Similarly, a camera also has a threshold of how much of the difference between light and
dark it can capture before the information turns to pure white or pure black.
This is called dynamic range.
Modern digital cinema cameras usually have around 15 to 17 stops of dynamic range,
while consumer video cameras may have less than 14 stops.
This is one of the reasons that it may be more difficult to achieve a balanced exposure
on cheaper cameras.
If the strength of the contrast ratio exceeds the dynamic range of the camera,
then the image will either blow out and turn to pure white
or it will get crushed and turn to pure black.
Usually cinematographers like to light scenes
so that the total exposure falls within the dynamic range of the camera.
In other words, they like to create images in which the highlights do not blow out
and in which the shadows are not completely crushed,
in a similar way to how the human eye perceives brightness in the real world.
So we know what exposure is, but how do we find the right exposure using a camera?
Cinematographers, or sometimes the DIT,
regularly use different tools to determine the best exposure, which we'll get to a bit later.
But good exposure on digital cameras can also be achieved
by just referring to the image on the monitor.
The thing is, what is considered a good exposure is a bit subjective.
For example, the Batman is lit and exposed at a very low level of illumination,
while a comedy like Palm Springs exposes at a much brighter level.
I'd say this lower level of exposure helps to accentuate the moody,
emotionally dark tone in Batman,
while the brighter exposure is literally lighter and brighter in tone.
It doesn't necessarily mean an image is bad or incorrectly exposed
if a small part of the frame is blown out or crushed to black,
as long as its exposure suits the tone of the story and the environment being photographed.
Although exposure is subjective,
most cinematographers still try to avoid one thing, blowing out highlights to pure white.
There are always exceptions to this rule and situations where this might be impossible to
avoid, but for the most part a good rule of thumb with exposure is to try to set it so that any large,
bright part of the frame maintains detail.
This is called exposing for, or protecting, the highlights.
Cinematographers using this technique will first dial down the exposure
to the point where the brightest highlights still preserve colour information.
This may mean that other areas of the image are now too dark.
To counteract this, DPs may then add light using artificial sources
to lift up the brightness of the shadows until there is detail present.
They may also use lighting to bring down the levels of any highlights to an acceptable level,
for example using a dimmer on a practical lamp or adding an ND gel or a net to a window.
That's why the best way to control the contrast ratio in an image is usually by lighting.
Sometimes cinematographers may be forced to blow out bright highlights that they can't control,
which take up a small portion of the image, such as windows, flames or practical fixtures.
As a side note, film stocks tend to deal with overexposure of highlights better than digital
cameras do. Film gives more of a soft halation, a gradual fall-off and renders highlights in a
creamier colour, as opposed to the uglier pure white of digital. However, there are ways to
counteract blown digital highlights, both on the grade as well as by trying to introduce a softer
highlight roll-off using diffusion filters. If you're creatively inclined, are looking
to explore a new skill or even reinvent your career, you can do so thanks to the sponsor of
this video, Skillshare. You may know Skillshare from their classes in photography, film and editing,
but did you know that they also have hundreds of career focused classes too? Traditional jobs
aren't for everyone. There are more opportunities now than ever to create your own business or
design a career that suits you. If you're like me and you're trying to build and sustain a creative
career in an industry such as filmmaking, Skillshare has loads of classes to help and
inspire you. I took a class by Simon Cade, who runs DSLR Guide, on how to build a career in
filmmaking and find success as a video creator. He offers great advice from a place of experience
on how to grow creatively and achieve financial security through a career in filmmaking.
So head over to Skillshare. The first 1000 people to use the link in the description will get a
1 month free trial of Skillshare so that you can start learning and exploring new videos today.
Although exposing by just looking at the monitor is popular, it also comes with a few downsides.
The first of which is that unless you're working with a specially calibrated monitor,
every screen produces a different level of brightness and represents colours and exposure
values in different ways. This could trick you into exposing incorrectly.
Light conditions on set may also affect how you see exposure. Even if you're working with an older
monitor like a TVLogic 056, which has lovely accurate colours, your exposure may still be
off as the monitor has a very dim picture brightness in outdoor situations.
To avoid making exposure mistakes, cinematographers either use physical tools
like a light meter or digital software tools built into the camera such as a waveform or
false colour, which is the most common exposure tool on high-end cinema cameras from Arri and Red.
When activated, false colour displays images on a monitor in a specific colour spectrum,
ranging from a warm red to a cool purple or dark blue, with green sitting somewhere in the middle.
Each colour represents an IRE value, a measure of brightness on a scale of 0,
being complete black, to 100, being complete white.
Cinematographers can use false colour to check that their highlights aren't red and blowing out
and that their shadows aren't purple and getting crushed to black.
People often recommend that to get perfect skin tones you should expose to where the skin tones
turn green or light grey on the false colour reading. However, as I mentioned before,
some cinematographers may want to disregard this and expose darker, in the dark grey to blue range,
to achieve a moodier feel.
Another useful exposure tool to understand is the waveform. This is made up of a vertical
axis that expresses exposure in IRE values from 0 to 100 and a horizontal axis that represents the
width of the frame. For example, if there's one bright highlight in the centre of the image,
it will be represented by a spike in IRE value in the centre of the waveform.
Like with false colour, a waveform can also be consulted to see whether areas of the image are
exceeding 100 IRE and blowing out or sitting on 0 IRE and getting crushed. Usually when consulting
a monitor for exposure it's good to use a LUT to expose with rather than looking at the log image.
Because a log image is so flat it may be easy to under or overexpose it while still seeing detail
in the log. But later in post production you may find out that when you add a LUT or grade it,
that it's under or overexposed and doesn't have enough detail to work with.
As I mentioned before, there are 6 exposure variables. Each of these variables can be
manipulated to arrive at an acceptable exposure, however some of these variables also have other
effects on the image. For example, frame rate changes the speed at which motion is captured,
the shutter angle changes how blurry that motion is, the ISO affects how grainy or noisy the image
is and the aperture affects to what extent the background is out of focus. For this reason,
many cinematographers maintain the same or similar frame rate, shutter, aperture and ISO
throughout a project and change the other two variables, the amount of light on a set
and the strength of the ND filter to control exposure. ND or Neutral Density filters are made
up of glass which reduces the amount of light that hits the sensor without changing the colour
characteristics of that light. When lighting a scene it's important to ensure that there's enough
light to properly expose the image. Rather have too much light than too little light. You can
always cut down the amount of light by using ND filters, but if a space is too dark you can't
get a brighter exposure without increasing the amount of grain or noise by lifting the camera's
sensitivity. The best way to go about controlling your exposure with a cinema camera is to first
ensure your ISO, shutter and frame rate are correctly dialed in. Then stop down the aperture
on the lens until you arrive at an exposure which you like. This may leave the lens at a stop of
for example T8. Next you need to determine what stop or aperture you would like to shoot at.
For example maybe you'd like to shoot at T2 to get a shallow depth of field. You then need to
calculate the difference in stops between T8 and T2. 1, 2, 3, 4. This means you need to add
four stops of ND to get to a shooting aperture of T2. Each stop of ND filter is measured in
increments of 0.3. So four stops of ND would be ND 1.2. This means you can add an ND 1.2
either with internal ND filters or with external glass ND filters in a matte box and set the lens
to T2. You now have the correct exposure while also having your desired aperture of T2 that
produces a beautiful shallow depth of field. That brings us to the end of another video.
Hopefully it helped you learn a bit more about how to expose a camera on your next shoot.
If you'd like to support the channel I have merch available
as well as a Patreon page where I release these videos early and free of ads.
Otherwise until next time, thanks for watching and goodbye.
