In this series, we are in Machida, Japan where we are participating in a new Japanese house build. The house design is based on a very traditional Japanese building style. The architect, chose a more classic design with his client and utilized a lot of natural land features to help increase the comfortability of the house itself. The positioning of the house along side a hill provides cool air during the summer months and a protection from too much loss of heat during the winter months. It is difficult to juggle the somewhat extreme climate fluctuations in Japan. The hot and humid summer months and cold and dry winter months are equally as long and difficult to comfortably adjust to.
The house has a two stories with the common living area situated on the first floor. The 1st floor has a large 12.5 tatami great room and a dining, kitchen, and tea area are adjacent to the large great room. Also downstairs is a full bathroom with the toilet room separated. There is an outdoor terrace space that faces the hillside which will provide cool and shade during the summer months. The second floor is available space for rooms or storage. This house is designed for communal family living where all members of the family will reside in the same room.
In Part 1 of the House No. 2 build, we are jumping right into building up the house. This house is more traditional in the sense that the pillars are set on top of stones which have been placed on top or embedded into a concrete slab. The stones used in this build are noted as being some of the heaviest variety in Japan which makes them ideal for supporting a heavy house construction. The day starts quickly as we were racing to get as much completed with the use of the rented crane and also the quickly changing weather. About half way through the morning the rain eventually came and shut down the worksite for 45 minutes. In this video, you will witness a few new Japanese joints and also how the labelling of the different pieces are done.
Hi everyone, we're at the Murakami residence, or the Murakami house.
This is a new build for the Fujimoto group.
This house is a little bit different than most of the houses that we've been doing.
It's two stories.
It's also got a lot more of these round beams, these marutas, which are very decorative.
The actual beams themselves are pretty sizable.
Everybody's out here right now.
We're setting up and getting it ready for building up.
It's called tatemae.
Everything's a little bit wet here, so they're squeegeeing the floor, the concrete slab.
You can see here on the ground, you can see how big that one beam is.
It's massive.
So it's a special stone.
This stone has been sent into the concrete, so it's in there.
These ones are just sitting on top of the concrete.
Is it the same material?
It's like a toothpick.
A small, thick toothpick.
So it's not very tall.
Maybe this tall?
About this tall.
Yeah, you can see it here.
It's a pretty thick stone.
It's probably about this thick.
Half of it's inside the concrete, the other half is above it.
But this is now the reference point, the datum for this house.
So all these stones have to be cut to about that same height, right?
Otherwise, you're going to have stones that are lower and some that are higher.
Don't be in a hurry.
Please wet it.
Oh, wait. The pillars aren't ready yet.
I want to put this in first.
I want to build this.
The pillars.
I'm going to start.
A little more.
OK, OK.
A different kind of joint right here that they're going to use just for the morita.
Or actually for this hashira right here.
So you can see here.
It's a two foot long beam.
It's coming out the other end.
To the center.
You've got to center it on the stone.
You've got markings.
It's perfectly centered on this one.
It's so exact.
So in a Japanese construction site, all the words, if you stand in one direction, you should be able to read everything.
So you can see all the words are facing one way.
And it's all visible.
OK.
I was holding my breath.
We have a rain delay.
We're on a break right now, but I'm taking a look at all the wood that's been laid out so far.
Everything's so straight.
Every stone is being touched perfectly.
And this is a big house.
I mean, each one of the beams are actually a lot bigger than a normal house, right?
It's like we're building a World Heritage site here.
I'm amazed.
We just finished today, day one of the Tatemae.
As you can see behind me, a lot of work was done.
We got all the bottom floor, the first floor done, except for a few certain pieces.
We started doing the upper floor where we started putting the joists going across the entire house.
It was a lot of work today.
It started raining and we had to shut it down for about 45 minutes, but we still were able to get as much as this done.
So it's pretty amazing how Japanese carpentry works.
The crazy thing about how this whole process happens is you have an architect that gives you the drawing
and then you design the joints and where you want them, where you want them located.
And that all takes a matter of maybe two months of cutting, which results in this.
In a single day, we get this much done.
So that's what blows my mind about Japanese carpentry.
All it is, is two months worth of heavy labor trying to cut these joints and then maybe two days of building it up.