Some of the links provided are paid links. As an Amazon Associate, we earn from qualifying purchases. We are members of similar affiliate programs with other companies as well. This means, at no additional cost to you, we will earn a commission if you click through and make a purchase.
All right. In today's vlog, we are going
to be making something really super
cute. If you guys know anything about
me, you know that I love thrifting and I
especially love upycling things into
something brand new. And so, we have
been just dying to create this super
beautiful shelf cabinet. I don't know
what you want to call it, but um the
idea is that you get an old frame and
then we are going to build a cabinet
behind a frame. So, it's like got a
door, you can open it. I hope I'm making
sense. But, we need to go get a frame.
So, we've got to go I think we'll go to
either Goodwill and see what they have.
Um if we don't find anything there,
there's a couple other places that we
could go and then we're going to have to
go to Home Depot and get all the things
we need. So, let's go ahead and head
into town and see what we can find.
[Music]
Okay, we are at Lowe's and I need to get
some wood for the frame as well as some
hinges. Um, we have some wood at the
studio, but I don't know if we have
enough. So, I'm going to measure our
frame out and I'll show you guys how we
do that back at the office. Um, just so
you kind of have an idea cuz not
everybody's frame's going to be the same
size, right? Cuz they're all thrifted.
So, we're going to go into Lowe's and
get some wood, get some hinges. I'm
thinking maybe some paint. I don't know.
We'll see what we end up with. Okay, we
got wood. Um, I got two 6 ft
boards. I was going to get one 8ft
board, but I was worried it wouldn't fit
in my car. Uh, there were lots of people
at Lowe's, so I didn't bring the camera
in, but sue me. Um, so anyways, I got
that and then I showed you guys the
frame in a little clip, but I just
wanted to show you with me. Like, it's
pretty big. It's pretty big little
frame. Um, it's from Bed Bath and Beyond
for
$35. We're going to have to cut this out
because we're going to put our own
artwork in this. And I think I'm going
to make my own mat, which we did a
project on that. I'll link below for you
guys. Um, actually, it was a members
only class. So, um, if you are a
Makaker's going to learn member, then
you can go watch that master class. But
we did watercolor DIY mats cuz you can
cut your own mats with a Cricut. Who
would have think it? Um, so anyways, I'm
going to create a mat, create some
artwork in Canva to put in here, and we
need to build the frame. Will we get it
all done today? I don't know. I think
I'm going to work on the artwork for
today and then see if we get time to
building the frame. Um, but yeah, so
let's go ahead hop into Canva and see
what we can come up with. Other thing,
um, I bought some
hinges. These are just I bought white
cuz I was thinking I'll probably paint
the cabinet white, but now I'm I'm not
sure because I don't want to paint the
frame white. I don't know. We may end up
taking those back. But altogether, I
spent $21 at Lowe's and like $4 and some
change at the Goodwill. So, we're not in
too deep. And if you already have some
wood, then you could probably just make
this with scrap wood. Okay, so I am
going first to the Makers going to learn
website and I'm going to find a file.
Okay, so I am just looking through these
duck files and we have this really cute
dunk pond. It's like a watercolor
painting
situation. Um, we're going to use that
one. So, let me open up
Canva. And I'm going to be creating a
document that is the size
of the biggest part of the inside of the
frame. So, I measured this way and this
way, and it's 11 1/2 by 15. That is
going to be our mat size, but I'm going
to make it that big and then do
the like actual print dimensions inside
of that. if you just follow along and
it'll make sense here in 2 seconds. So
11 12 by 15. We're doing this in inches.
Create new design. So the size right
here is the size that I just showed you
guys. And then I'm going to come over
here to elements and we're going to grab
a
shape. And I am just going to size this
up. Also, I don't know if this works
with other elements, but used to with
Cricut, you could
not used to with Canva, you could not
resize the shape on the edges. But you
see how there's these arrows now. So, I
want to have a pretty
thick mat around this
just because I think that will be the
cutest.
And sometimes I even like it to be let's
do like eight by
10. Eight
by 10. Perfect. Okay. Now we need to
upload our image, our duck
pond. Okay. So cute. And then I am going
to
look at some patterns and see if I see
any I like.
[Music]
Okay. So, I'm printing this on an 8 1/2
by 11. Um, which is great because I need
like a little bit of an edge on my print
to attach it to the mat. And we made our
design 8x10. And then we are going to go
to media and quality feed from rear
tray. I'm going to print this on a
thicker card stock just cuz I think it's
going to be better that way. Um, and
this doesn't have like glass in front of
it, but I do have a fun little thing
that I saw on Tik Tok some people did
where they would take Mod Podge and like
add it to art to make it look like
gessoed. We're going to do that cuz I
think that that would make this look
even better. So, I'm trying to go for
like a vintage vibe, you know? So,
anyways, we're going to print this from
the rear tray. And I am using the Canon
TS9500 series printer. It's our ride or
die printer here at the office. Um it's
just an inkjet printer and relatively
cheap.
Okay. And we're going to do best quality
always.
Little behind the scenes of our storage.
I'm looking for
[Music]
fabric. Okay, we've got three options.
We're going to see how these work. Let's
go. Look.
[Music]
Okay, we're going to go with the strap
fabric. So, we've got a piece of art
board. I thought this was like photo mat
board. Um, we were actually going to
throw it out cuz we like didn't know
what it was, but this is art board from
Hobby Lobby. It's just a 16 by20 piece.
It's got a $4.99 sticker on it. So, um,
you could do this. You could also, if
you had like a big piece of card stock,
um, create your own, but this is like a
it's a pretty hefty board. So, we're
going to cut out an 8 by10. Even
though Even though this guy is um 8 and
1 half by 11, we're going to cut an 8x10
square. And this is going to fit nicely
right in the middle of here. And then
I'm going to cover this in that striped
fabric. And yeah, I think we're we're
getting somewhere. We're getting places.
Okay, we're going to go with the strip
fabric. So, we've got a piece of art
board. I thought this was like photo mat
board. Um, we were actually going to
throw it out cuz we like didn't know
what it was, but this is art board from
Hobby Lobby. It's just a 16x20 piece.
It's got a $4.99 sticker on it. So, um,
you could do this. You could also, if
you had like a big piece of card stock,
um, create your own, but this is like a
it's a pretty hefty board. So, we're
going to cut out an 8 by10. Even
though even though this guy is um 8 and
1 half by 11, we're going to cut out an
8 by10 square. And this is going to fit
nicely right in the middle of here. And
then I'm going to cover this in that
striped fabric. And yeah, I think we're
we're getting somewhere. We're getting
place.
[Music]
I'm up.
[Music]
You see how this is like gesso material
textured? That's what I'm talking about.
We're going to do that with the Mod
Podge. Okay. Made a oopsie. And
obviously didn't measure this to the
size of the frame. It happens. What I'm
going to do is kind of line this up in
here. We can use our
little art piece. Might be a better way
to do
this. I'm going to trace this on here
and see.
Let's measure it cuz I totally eye that.
We've got like one and
[Music]
3/4,
two, and a little a little over two.
[Music]
[Music]
All right, there you go. Beautiful. Wow.
Okay, let's just put it in the frame and
see if it fits. If it fits, it
shifts. I got to take the staples out.
Remember, it doesn't have to be pretty
yet because we're going to cover it in
fabric. So, really, we're just trying to
make sure like everything's going to fit
nice and
snug. It's not super snug, but there's
staples up here in the corner that are
like not letting
it sit flush.
So, all the staples are out. Matt is
cut. We've got to Mod Podge this now.
So, I'm using Makaker's Magic, which is
kind of like uh Mod Podge, but better
typically. Um I was saying I wanted to
use Mod Podge because it's more streaky.
Maker's Magic is very like
selfleing and I need this to be kind of
textured. We're going to test out like a
little
[Music]
area. Okay. So, I'm not doing a
lot. Again, if you did this on copy
paper, it's going to make your paper
really like uh wrinkly. That's not what
we're going for. We just want it to
look like painted almost.
[Music]
give it some texture. And you don't want
this to be neat. You're kind of making
little X
[Music]
shapes.
Okay. I don't know if you guys can tell.
This is
glossy. Kind of gives a sheen.
Can you see it from over there? Just add
a little
something. Okay, the next thing we're
going to do is add the fabric to our
matting. So, I'm going to flip this
over. And if you got any like excess
little pieces of the card stock, kind of
get it off with the true control knife
or tear it off.
[Music]
And then I'm going to
actually iron this fabric first.
[Music]
Okay, that's pretty ironed. I'm going to
take the mat and lay it on
here face down. And I'm going to kind of
sketch this
out. Now, for the outer edges, it's
going to be kind of hidden, but for the
inner edges, we want it to be pretty
neat. So, those I am going to kind of
fold over the insides of the mat. Now,
professional framer people don't come
for me. I don't probably that's not the
way to do it, but that's what I want to
do. And I'm gonna go ahead and try to
cut this
fabric. I'm going to also cut little 45°
angles right
[Music]
here at each corner. We're going to cut
a slight
angle so that the fabric can fold over
neatly.
[Music]
[Music]
Okay. Now, for the middle, I'm just
folding it in half. And I'm going to cut
a
hole like so. And then I'm going to
neatly cut out this middle piece.
[Music]
Okay. Now, I am going to make sure to
reinforce these
45° cuts right
here so that these can lay nice
and flat. Okay, we're going to get our
mat. We're going to dry fit
[Music]
it. Really trusting the process on this
one. I think we're going to be okay.
Okay. I'm going to take my Maker's magic
and I am going to glue this to the
board. I'm actually going to erase all
these little marks just in case
cuz I don't want to glue it down and
then you'd be able to see pencil marks
through it cuz it's kind of see-through.
If you have a heavily patterned fabric
or if it's darker, then I wouldn't worry
about it too much. But where this one is
a little bit thinner and lighter, just
worry you'll be able to see these pencil
marks.
[Music]
Now for the inards these
parts cuz I could add glue right here on
the
inside. Maybe that's just what I'll do.
So, I'm just going to lift this flap of
fabric up and
take take some of this Mod Podge and
kind of
lay it right
there. It takes a second to get tacky,
but I think that that's going to work
perfect. This is it. Um, let's put it in
our frame. I have made an oxolate mask
over
ahead. I'm going to straight up trim the
top of this off, this fabric, cuz I
think just that little amount
is what's holding this back.
[Music]
So, I'm just using washi tape, but you
can use masking tape, scotch tape.
Honestly, it doesn't really matter as
long as it's going to stay. And I put a
piece here. I'm kind of pulling it
taut. Let me make sure it's straight
before we
It's got
it on there pretty
straight. Okay. So, this is what we're
working with right now. Um, there are a
couple things that I need to fix, but
also we've got to build the cabinet. So,
I am going to hit this again tomorrow
and hopefully get it done. But yeah,
it's looking good. Okay, we're back. Um,
this is where we stopped, but we need to
add our cabinet. So, I took the original
art and put it back in here. It's kind
of loose though. So, we are going to
have
to staple this in. Maybe I'm probably
gonna staple it in. Um, you could also
cut like a piece of wood if you wanted
back here, but we're trying to use as
little tools as we need. So, I'm
probably going to either nail or staple
this in. Um, cuz I don't really plan on
changing the art out personally. Um, but
you may want to reconsider if you do
want to change the art out often. Um,
anyways, I'm going to attach this and
then we're going to build the frame.
Okay, I am in our tools area, which we
just moved, so it's kind of a hot mess,
but we're working on it. Um, I need a
nail gun. If you've never used a nail
gun, this is like a good core tool to
have as a crafter. I say a nail gun will
do a lot of good for you. a staple
gun, something, you know, not too crazy.
A drill, but we don't need a drill. We
need a nail gun and a stapler.
Or worst come to worst, we could hot
glue it in. That seems a little
unfinished to me. So, I don't really
want to do it that way. But if we needed
to, we totally
could. I am going to need a tape
measure. So, let me get that.
possibly some wood
glue, a sanding lock. I've decided I'm
just going to use the nail gun to attach
the frame. So, let's do
[Music]
that. I'm flipping it around so the
artwork isn't actually showing.
And
then that's not going to
work. Thank
[Music]
you. Okay. So, you can't put the you
can't put the nail gun all the way up
flush with the edge. You kind of have to
hold it out. You can see right here it's
kind of out. That's what we want because
I want to hold I want it to be held in.
You know what I'm saying? So, we're not
putting it all the way flush to the
side. We're kind of holding it out maybe
like an eighth of an
inch. Okay.
Beautiful. She's cute. She's gorgeous.
Now, we've got to measure our shelf. So,
so I don't want the shelf to be the
entire width and height of the cabinet.
I kind of want it to be like inset. So,
I'm going to
measure slightly smaller than the frame.
So, grab your measuring tape. We're
going to measure our frame.
17 by
21. So, I'm thinking if we
did
15 by
19. That's going to be perfect. So,
we're going to build We need to build a
frame that's 15 by
19. Research. I feel like that was a
different when I tell you this piece of
wood made the entire frame to a tea. I
did add an extra inch. So they're I've
got two 16inch pieces and two 20in
pieces. I'm going to 45° like put 45°
angles on them. So it should work out
good. But I always like to give myself a
little bit extra room because I'd rather
it be a little bit too long than a
little bit too short. and then you can't
use it. So, added an extra inch. We're
going to go ahead and cut it. I am using
a jigsaw for this. You can use a miter
saw, whatever kind of saw you've got.
You can use a handsaw if you're more
comfortable with that. Um, a jigsaw is
also another good crafter tool that I
recommend. Um, especially if you're like
a sign maker or if you do like doing
woodworking, jigsaw add to your
Christmas list.
[Music]
[Applause]
[Music]
We've got our frame pieces. Let's sand
them.
[Music]
So, you don't really need to 45 them
necessarily, but it looks a little bit
better. They're going to be hidden. So,
I think I'm just going to keep them as
they are. And I've just kind of laid out
the frame. Let me show you guys. So,
this is kind of what we're looking at.
Obviously, I want to put a shelf across
the middle. I'm going to go ahead and
build this and then measure the distance
between these two. Um, and then we will
assemble and stain. But also, you can
see where the corners, they're not
perfectly lined up right now cuz I've
just kind of got it dry fit, but we're
going to attach those together just as
they are. Okay. This little guy right
here, if you make a lot of frames, um,
this can do clamp is so nice because you
can just slide one piece of wood here,
one piece of wood here, and then you
tighten it up and then it allows you to
nail it together and it's so much easier
because if you try to hold both of the
pieces, try to put the nail in, it's
just kind of a pain. So, I'll show you
guys what this looks
like.
Beautiful. And then we can take that
nail gun and put nails right there and
it's going to hold it in place for us,
which is so
nice. We've got one
[Music]
corner. So, you have to use scrap wood
pieces to kind of hold these pieces
straight. Is this the best woodworking
job I've ever done? Hard no. Um, but you
know what? We're going to make it work.
It's going to be cute. It's going to be
functional. And it's going to be hidden.
more importantly, but I'm just not on
top of my game today. So, anyways, we
need to build a shelf for the middle of
here cuz I'm thinking like you can put
your perfumes in there, your sunglasses,
I don't know, whatever you want to put
in here, medicine. Um, so I'm going to
just create a shelf along the middle of
this. So, I'm just going to measure it,
cut it, and install it with the brad
nailer.
[Music]
I'm going to do two smallish shelves and
then one taller shelf for like body
sprays or hair products, things like
that.
Here she is in all her glory. Now, um
I'm going to sand one more time and then
I'm going to
stain and then we're going to attach it.
I'm not 100% sure how I'm doing that
yet. I have
hinges. We'll see. We're going to figure
it out together.
[Music]
Okay, so I have just lined my shelf up
on the back of the photo frame and then
I took the hinges is. And I have not
drilled them in yet, but you can kind of
see I just put this as close to the edge
as I could. You will have to kind of
bend them. These are honestly kind of
heavy duty. I don't know that I
necessarily needed them to be that heavy
duty, but it's going to work, I think.
So, let me go grab the drill and we're
going to attach the shelf to the back of
this. And I think some just standard
like D hooks or maybe some zigzag hooks
will be fine depending on how heavy it
is that you're going to be putting
things in here cuz the whole the whole
shelf isn't like super heavy. But you
want to have something that's going to
hold this plus things you're going to
put in it. So let's go ahead and drill
these in. So these are the screws that
came with it. They're not super long.
I'm not worried about putting them into
the frame we built. I'm a little worried
about putting them into this frame, but
it's kind of thick. You can honestly
take
it and see like I'm pretty sure it's
going to go through. Um, but I'm going
to go ahead and drill these into the
actual
shelf just for stability and then we'll
go from there.
Okay, here's the ultimate test. Okay,
will it
open? Oh my gosh. Am I a cabinet
maker?
Hello. I put it on the wrong side. I I
put it on the wrong side. I opened it
side. Okay. Don't be like me because I'm
not going to redo that. You want to put
them
on the other side. But you know what?
That makes it a little bit more
inconspicuous. Also, I would recommend
painting this part the color of whatever
your walls are. So, if your walls aren't
white, don't paint it white. But, like,
if you have tan walls, paint it tan. I
don't know. I feel like this being the
color of the wall is going to be a lot
more
inconspicuous than staining it. Cuz I
was going to stain it thinking that
would look good, but you want it to be
like hidden.
So, anyways, there's that. We need to
put some maybe hangers on the
[Music]
back. Okay guys, that's it for today's
thrift flip. Let me know in the comments
what you thought, what you would do
different, and are you going to try to
recreate the same exact thing? Let us
know in the comments. Make sure to
subscribe and hit that little bell so
you're notified every time that we post
new crafty projects. And I will see you
all in the next one. Bye, guys.