Integrated Multi-Robot Auto Inventory Project Complete! #engineering #robotics #science #3dprinting

LeMaster Tech
183 followers
426 Video Views·Jun 5, 2025
This is how I built my combo 6-axis robotic arm and AGV system in 90 seconds.
First, obviously, get a 6-axis robot, mount it on top of the AGV.
Next, design a shelving system that can have little platforms for boxes on top
and a tab that indexes where the robot is in space below.
Then actually design the component with the clamp section onto the shelf
and the top platform and the tab that dangles down.
Then mount a proximity sensor to the side and a custom bracket that'll message back
to the AGV and tell the robot car where it actually is in space.
Then design a box that can hold your inventory components
and make sure it has a handle section that can fit easily in the robot grippers.
Now it's time to write Python code for the robot to listen to a signal from the AGV
that it's time to pick.
Then go to pick location, grab the object and return home.
Send an output to the AGV when you're done.
Then listen for another input that tells the robot when it's time to place the object,
which is basically the same action but in reverse.
Then send another output to the AGV when done.
Now for the code on the AGV, note that the inputs and outputs are basically flipped
versus the perspective of the robotic arm.
The AGV waits for a user input to start the sequence,
drives to the position that it needs to grab the object from as detected by the proc sensor,
listening for those tabs on the shelf items.
Once it gets there, it sends an output to the robotic arm to pick,
and once the input comes back in that it's done,
it drives back home, sends another output to place the object down,
and once the robot completes that action, we restart the cycle and wait for another input.
The last piece is cobbling together a passable GUI using the Kinter module
so it's easy and clear for operators to use.
Then just sit back and enjoy the little robots doing their thing.
Be sure to check out my YouTube for more in-depth info on this and lots of other great projects.
