Excalibur Tact 100: How to Mount and Sight In Your Scope

The Technology of Old Crossbows
4 followers
4 Video Views·Jun 3, 2025
Excalibur Tact 100: How to Mount and Sight In Your Scope
Hey folks, Dan Waltz with Excalibur's Honda Backwoods and today I'm going to show you how
to attach your Excalibur scope to your Excalibur. Now this happens to be the brand new Tac Zone 100
and it had hold marks all the way out to 100 yards. Now realistically we're not going to be
shooting animals at 100 yards but it's fun to shoot targets out to 100 yards especially with
this brand new assassin that's shooting 420 feet per second. But here you go guys, your scope comes
from Excalibur with the 30 millimeter mounting brackets already on it. Now what I like to do is
go ahead and take all the screws all out so I have everything disassembled so I can make sure
that everything's tight all the way. So now we have our rings off our scope and you want to loosen up
this nut on the side here. Now I know from shooting Excaliburs I like my scope a little bit
more forward and I always like to put it in the second bar right here. So make sure that it's
clamped on one side, make sure that that other clamp is secure there and just finger tighten
that for now. Grab your other scope base, loosen it up, it's going to go about right there and
finger tight it. So you've got the weaver bar in between the grooves on the scope brace and they're
finger tight and they're barely moving. Now take your Excalibur scope with your elevation
turret, point it up and make sure that you have enough forward and backwards there which it looks
like I do. So now I have enough forward and backward eye relief there if I need it. So we're
going to go ahead and take our screwdriver and tighten up these side nuts. So those are gripped
down there pretty good. Now we're going to take the top of our rings, put them on top of there and
you're going to take a little bit of blue Loctite and put on the threads that secure the top and
the bottom rings and repeat that with all four screws. Now don't tighten these screws down too
tight and make sure that they're even on both sides but you want your scope to still be able
to move but it's a little snug because now we're going to level our bow and also get our proper eye
relief on our scope. Now a lot of guys will just look through the scope and try and get the
horizontal perfect with the limbs. Now that would work fine for probably shooting out to 40 yards
but if you really want to go for major accuracy all the way out to 100 yards, if this is not level
with the riser you're going to get left and right variations. So what you do, put your bow down on a
sandbag so it's not flopping around and there's several different kinds of levels out there guys
but I like to use a big level on the front and get my limb or my risers level and then come up here
to the turret, put one on top of the turn here and now match them up. Now making minor adjustments
you can see that my top of my turn on my scope is level and my riser is level. So now
you can either use your hex head here or I like to use a torque wrench and you want to use anywhere
from 15 to 20 pounds of torque on those screws. They're not very big screws and you want to go
in a cross pattern just like you put a tire on. So tighten up a little bit here, come around to this
side, tighten up a little bit here, that way we're tightening evenly against the scope and keep
repeating that process until you get to about 15 to 20 foot pounds of pressure. I've got the torque
wrench set at 20, there she pops, there she pops, there she pops. Now you can do that with this
but if you over tighten it you can strip that screw out. But again let's check our level,
make sure when we were tightening up our screws that we were good. Yep we're good.
And that's how you're going to properly mount your Excalibur scope on your Excalibur.
And again guys if your scope is not level you're not going to be able to make those longer shots.
The farther the shot the more left or right variances you are going to have if your scope
is not in level. Well now that your scope is attached in another video I'm going to show
you how to sight in your scope and how to adjust the speed dial to your Excalibur.
