Helmets: The Sallet Pt. 2

Shield of Antiquity
8 followers
5 Video Views·Jun 3, 2025
Picking up where we left off, today we will look at some simpler, more accessible forms of the sallet, discuss bevors, and finally conclude with the demonstration of a reproduction in the Late 15th Century German style.
Comments are disabled for this video.
Hey guys, welcome back.
I'm Ian LaSpina, and today we're going to resume our discussion of salads.
Hey guys, welcome back.
I forgot to mention it in the last video, but there are links to photo albums in the
description of the video, both a detailed photo album of the reproduction that we see
here as well as a link to Pinterest albums of all kinds of extant salads and bevers.
So we still have a lot to talk about with salads today.
We're going to talk about simpler forms of the salad, of course the bever, then we'll
take a look at the reproduction we have here, and we'll finish up with a demonstration of
the reproduction being worn.
So one of the reasons that the salad is one of the most overwhelmingly popular helmets
in late medieval Europe is because it's accessible both up and down the social ladder.
Most of the salads that we've looked at in part one were really the kind of high-end
helmets relegated to the knightly class and the wealthy man-at-arms.
But there are a lot of simpler designs of salads out there that were far more accessible
and easier to manufacture for less wealthy men-at-arms and for lower class infantry and
archers.
So we're going to take a look at some of those.
So the simplest configuration of salad is the basic open-faced salad.
No visor to speak of.
It's got really none of the bells and whistles of some of the fancier examples out there.
But it's still a great alternative for lightly armored infantry, archers, crossbowmen, etc.
It doesn't include a visor, so it's got unrestricted visibility, unrestricted breathing, and probably
offers better hearing than a fully enclosed helmet.
Another interesting example of a kind of play on the open-faced salad is this version from
the Wallace Collection.
You'll notice that it has holes punched around the skull, most likely for the attachment
of a liner.
But then there are three additional holes in the forehead that form kind of a triangle,
and it's believed that those could have been used for the attachment of a hinged nasal.
So now you kind of get the benefit of the open-faced salad, where it's cheaper and easier
to manufacture.
It has great visibility, great breathing.
But with the addition of a nasal coming down over the face, you do get a little bit of
additional facial protection.
Glancing blows, anything that comes from the side other than a direct thrust to the gaps,
it offers a significant amount of protection.
Now speaking of archers, in the 15th century, there's an account of a Burgundian knight,
Olivier de la Marche, who sends an order of armor to England to be sold.
And in the account, he specifically designated a significant portion of the salads that were
included in the shipment as specifically for archers.
Now we don't exactly know what he meant by that.
It could have just been a simple open-faced variety.
But again, there's another interesting helmet at the Wallace Collection that, you know,
this is one example, so we don't know if this was a common thing or not.
But if we look at it, you'll see that it has a hinged cheek piece on the right.
Otherwise, it's just kind of a basic open-faced salad.
But you can imagine with that hinged cheek piece, if you're able to lift that up as an
archer, that's a great way to be able to draw that bowstring back to the cheek.
Or for a crossbowman, being able to get that stock closer to the face in order to fire
a crossbow.
Now like I said, we don't know if these were widespread, but that's a pretty cool design
to both give you the benefit of the protection and allow you to use your weapon more effectively
while being able to wear a helmet.
So the next family of helmets I want to talk about are what are collectively known as the
Black Salads.
And they're generally called that because they're a family of helmets that are left
rough from the hammer.
They are nothing to write home about in the looks department, but so you'll see when you
look at them, they have a lot of pitting, hammer marks all over them, their shape isn't
particularly refined.
They kind of look like they were halfway to forming the salad's shape and then just kind
of left it a little bit flatter.
It's kind of like a pancake salad.
The polishing and grinding that normally takes place on higher-end armors, that's a very
expensive process and it's a very time-consuming process and it's pretty much wholly omitted
from the family of Black Salads.
So the lines aren't perfect, things are kind of asymmetrical and a little bit wonky here
and there.
But what the advantage to that is, is that they're much cheaper to manufacture, they're
much faster to manufacture, and while they're not pretty, they get the job done.
So as a munitions-grade level helmet for outfitting larger amounts of heavy infantry, it's really
kind of an ideal solution.
The other kind of interesting thing about the Black Salads is that while they're not
much to look at when they're in the state that you see them like this, what's one way
to kind of spruce up an otherwise unremarkable helmet?
Well, you can paint it.
There are a few examples of salads in this family that still retain some of their original
paint.
Probably the best and most widely known example is the object that is housed at the Wallace
Collection and, you know, without that paint it would be a rather kind of unremarkable
munitions-grade salad.
The lines aren't very straight, it's very kind of rough, but with the paint that's used
on it is a linseed oil-based paint and with that decoration it becomes a rather remarkable
work of art and we're kind of lucky that it's retained its original decoration to today
and some, you know, Victorian antiquarian didn't polish all the paint off because he
wanted it to look nicer.
So as an aside, one kind of thing I found interesting is stylistic influences throughout
Europe.
We saw in the first part how the salad started as the cellata in Italy and kind of spread
out to the rest of Europe.
By the 1460s, we saw the emergence of the kind of German style with specific German
characteristics.
Well, by the beginning of the 16th century that style influences kind of come full circle
and this is actually an example of an Italian salad that is now starting to exhibit some
of the characteristics of German styles.
It has a slightly extended tail and most notably it includes fluting on the top of the skull
which is reminiscent of the very German Maximilian style of armor that was emerging at the same
time becoming popular in the beginning decades of the 16th century.
So as we've seen so far, salads are really good at protecting the upper half of the head
and face but the lower half of the face is kind of left open and the chin and the throat.
So that's of course where the bever comes in.
Now bevers come in almost as much variety as the actual helmets that they're paired
with.
This is an example of probably the simplest form of bever where it's all made from one
piece and there's no articulations or anything like that.
But then at the same time here is another example.
This one comes up a lot higher on the face so it's probably going to come up probably
to about the nose.
You'll see it also has a breathing slit to compensate for it being a little bit higher
and it's also articulated.
It has a spring pin on it so that that upper half of the bever can slide down allowing
you to breathe and then when you need more protection you can raise it back into place.
At the same time we see articulations on the chest portion of the bever.
If you look at this example you'll see it's made up of multiple lanes so that when you
lower your head that can collapse a little bit giving you some more range of motion in
the downward head motion.
There are also examples of bevers around this time that are being secured directly to the
breastplate to make the whole configuration a little bit more secure.
The first time we see this we generally see it done as a strap and you can see here in
some of the examples of the men-at-arms in this image that the lower portion of the bever
has a strap connecting it directly to the breastplate very similar to the way that a
placket would be attached to the breastplate from underneath.
By the emergence of the high gothic style in Germany we see an even more elegant way
to connect the breastplate to the bever and that is through the use of a staple.
You can see on this example here it has this extended clip at the bottom with a spring
pin at the very bottom that protrudes outwards and then when you look at it here, this is
a different bever but same idea, you can see that there is a staple on the breastplate
that is set up to receive that clip and when it goes in the spring pops up on the other
side and locks that breastplate down to the, or locks the bever down to the breastplate.
So as you look at the bever you can see it's really good at protecting the front half.
For the most part the back of your neck would be protected by the tail of the sallet but
in some cases we do see evidence for bevers that include integral back of the neck protection.
Like you see in this guy has his kind of loosened up but you can see the male going around the
back of his neck from the bever and then here is a surviving example and you can see the
male kind of hanging off the back here but that's going to provide, if you're wearing
a male collar already, an additional layer of male over the back of your neck or just
a single layer of male if you're not wearing a male collar.
I'm unaware of any surviving examples that are known to pair specifically with a sallet
but an alternative as we see in artwork that they could be worn with sallets is a more
typically later articulated gorget design to protect the neck instead of the bever that
would come up over the chin.
But these are a little bit harder to find.
So now we're going to take a look at this reproduction.
This was made by Greg Woznak and Patrick Thaden in the late 15th century German style.
If we remember back to the first video, some of the characteristics that made a sallet
typically German in style, the longer extended tail piece that slopes downward, the more
typical half visor, and then a spring catch to lock the visor in the down position.
This particular helmet, you'll notice that on sallets in general, the way that the visor
kind of comes to a peak in the front, just like we've seen on almost every medieval helmet
that we've looked at, is basically a curved glancing surface to encourage weapons to leave
the helmet.
And you'll notice that there are really no flat parts on the helmet, just like all other
pieces of medieval armor.
It's all a glancing surface.
It makes it very difficult for a weapon to hit anything that's flat or hit it on a perpendicular,
which would enable it to deliver the most force or potentially penetrate that armor.
The spring catch on the sides, we're going to take a look at how that works.
So when you depress the button, this is the piece that is going through the hole on the
visor.
When you push this button, and you kind of let that get out of the way, now the visor
is free to move up and down.
And then to lock the visor back down in the down position, you can depress the button
a little bit to get that pin out of the way.
And then as you bring the visor into position, it'll pop back through the hole, and now the
visor is locked in the down position.
You'll also notice a series of rivets that go around the helmet.
This is for the securing of the liner on the inside, and then another pair of two rivets
on either side for attaching the chin strap.
Removing the helmet and taking a look at the inside there, now you can see what those rivets
are doing.
There's a leather band that goes all the way around the circumference of the helmet, and
then the textile liner is in turn sewn to that leather band.
The liner itself is a quilted textile liner, and you'll notice that those characteristic
lobes at the top, that's what makes it adjustable.
There's a little string at the very top, so the looser you tie it, the deeper your head
will sink, if you have a bigger head.
And then it'll accommodate slightly smaller, reposition your head inside the helmet if
you tie it tighter.
But what that does is it keeps your head from actually being in contact with the helmet,
so your head is kind of floating inside the steel, very much like modern ballistic helmets.
Here's the chin strap, so for a helmet like this that only comes down to half of the head,
the chin strap's really the only way that's going to keep it on your head.
And then this is the inside of the spring pin mechanism, so this piece of steel is very
stiff, it wants to spring back into place, so as you push the button, this flexes outward,
and then as you release it, it pushes itself back into place, and that's how you get that
spring action.
Looking at the bever now, this is an example of a taller bever, you can see it kind of
comes up all the way to the nose.
This one is lined, and that's what these rivets here are doing.
These rivets, very much like the helmet itself, are attached to a leather strap, and then
the textile liner is sewn to that.
And it includes a spring pin here, this one is articulated, so you depress that pin, that
allows you to lower the bever, freeing your mouth to be able to breathe more easily.
Now you can see the padded liner on the inside.
So that strap and the sewing makes it very easy to simply cut or remove the thread, take
out the liner if it's damaged or it just needs to be cleaned or replaced or whatever, and
then you simply whip stitch it back onto the leather, and you've got a liner change.
Raising the bever again, you'll see, just like on the helmet, that pin is going to pop
into place, and now the bever is locked in the up position so that it cannot accidentally
be lowered, making you less protected.
Alright, so now I've got the sallet and bever on, I'm wearing it with my personal breastplate,
which is a style mismatch, and obviously the curvature doesn't match because they weren't
made for each other.
But I thought it was more important to show the bever sitting on top of a breastplate
like it should, because that's what helps push the bever up into the proper position
so that it can sit in the correct spot.
Alright, so I've got the helmet in its most open configuration now.
I've got the visor completely open, the helmet is physically tilted back on my head, and
the bever is in the lowered position.
Vision-wise, I'm virtually completely unrestricted.
I can see everything above me.
If I look hard, I'm kind of aware of the corners of the helmet here, but they're not really
restricting my vision, and I can still look side-to-side just fine.
Breathing-wise, again, completely unrestricted.
My nose and my mouth are not obstructed in any way.
I can breathe just fine.
Hearing, I can still hear.
I get a little bit of reverberation because my ears are on the inside of the steel, but
for the most part, a normal speaking voice still sounds like a normal speaking voice
to me.
Now what I'm going to do is lower the visor to either show you how you can just tilt the
helmet back even with the visor lowered, compromising some vision, or to simulate a salad that doesn't
have an articulatable visor.
Alright, so the visor is now locked in the down position.
Breathing-wise, I'm still virtually unrestricted.
Mouth and nose are still unobstructed.
Vision-wise, I can still see very well in front of me and down.
I can still look side-to-side, but now I'm very aware of the lower edge of the visor
here, and basically I can see my hand here.
I cannot see it anymore.
So I'm losing a significant portion of that upward vision, but again, I'm a lot more protected
than I was before.
There's a much smaller target here.
With the bever raised, obviously I sound more muffled to you, I'm sure, but now I've made
that slit even smaller of a target while still retaining most of that vision.
I lose just kind of right in the center and straight down, but I can still see very well
in an arc around me as compared to with the visor down.
Breathing is a little bit more labored now just because I'm breathing straight into that
quilted liner, but because this is so open, air exchange can happen pretty easily.
Alright, what I'll do now is I'm going to lower the helmet down into its most protective
configuration.
I'm going to do some movement so you can see about where my range of motion occurs, and
then I'll do my peripheral vision test where I'm going to bring my hands in until I can
see them while still looking straight ahead, and then I'll talk about that when I'm done.
Alright, so I'm aware of both of my hands now staring straight ahead into the camera
lens, which that's a pretty good cone of vision.
Get my beard tucked back down in there.
Alright, so with the visor down, obviously breathing becomes a lot hotter in there.
Breathing becomes more difficult.
All that air exchange is kind of in that tiny little gap and then through the vision sight,
so that's a little bit more of a challenge.
It becomes a little bit harder to hear, but not too bad, and obviously vision becomes
now kind of a much narrower arc in front of me, so you're going to have to kind of keep
a scan going to complete that sight picture depending on what you're doing, or you simply
tilt the helmet back, get a look, and then lower the helmet back down into position.
But I hope that gives you an idea of how versatile the helmet can be.
So I hope what you notice is that the Salit is really one of the most versatile helmets
out there.
It can be worn in so many different configurations.
It can be worn with a visor.
It can be worn open-faced without a visor.
It can be paired with a bever to make you more fully armed.
It can be worn without a bever to enhance breathing and mobility.
It can be equipped with a nasal.
You can dress it up as much as you want, or you can dress it down as much as you want,
and while overall, even in its most complete form, it's not as protective as, say, a great
bassinet or even an armet.
Its versatility is one of the factors that I feel was probably one of the reasons why
it was so overwhelmingly popular.
It was accessible to upper class, it was accessible to the lower class, and it can be worn in
so many different configurations to suit it to a given situation.
Alright guys, that's everything I've got with the Salit.
As always, if you liked the video, please give me a thumbs up.
If you haven't subscribed already, please do share the video with your friends.
If you have any questions or comments, please leave those down below.
You guys know I always try to answer as many as I can.
Until next time, I hope you guys enjoyed the video.
Thank you very much to my patrons on Patreon who help support the channel.
It's very much appreciated.
And until next time, thank you for watching.
Bye.
