Some of the links provided are paid links. As an Amazon Associate, we earn from qualifying purchases. We are members of similar affiliate programs with other companies as well. This means, at no additional cost to you, we will earn a commission if you click through and make a purchase.
If you're here because you've seen videos
that people have busted myths and you wondered,
does it really work?
You are in the right place because today,
we are busting cricket myths
that I'm sure you've probably heard.
So stick around because you might learn something new.
If you're new here, my name is Lauren
and I'm a craft producer here at Makers Gonna Learn
where we strive to bring you inspiration,
education and motivation to use your cricket machine.
So as an avid cricket user,
I'm sure that you have seen people say,
do this because it works, do that because it works.
But today, we're gonna bust some myths
that you may have already heard.
Let's go ahead and jump right in.
Myth number one, I feel like I've heard this
around the channel quite frequently
and that is the fact that more pressure
or the cut setting more pressure
will give you a cleaner cut.
Y'all, that is completely a myth.
That's not always gonna be the case.
Does more pressure press the blade down into the vinyl
a little bit more than normal?
Yes, absolutely.
The reason though that this is
that it gives you a cleaner cut is a myth
because sometimes the materials that we are working with,
it could possibly drag that material
because like I said, when you have more pressure,
the machine presses that housing,
the blade housing down further
so that the blade can cut deeper.
So it cuts a little bit deeper
but that doesn't always mean that it is better.
It may end up that it cuts
all the way through the transfer tape,
meaning that you can't keep it all together
and it's all in separate pieces.
And like I said, more pressure will sometimes
drag the material and bunch the material up
to where it's completely ruined.
So that is a myth.
I'm not saying that we don't use more pressure
because there are a lot of times
that more pressure can be helpful and is helpful
but it does not always give you a cleaner cut
like some people say.
The next myth that we are busting
is the fact that Cricut brand products
are the best to use with your Cricut machine.
I know there are so many people
who go out and purchase a Cricut machine
thinking that the only products
they can use with that machine are Cricut brand.
And this goes for any type of machine that you get.
Of course, if one brand makes a machine,
they're gonna want you to buy the material
that they produce as well
because that's where they're going
to make a lot of their money.
However, that does not always mean
that it is the best material for you to use.
One great example is heat transfer vinyl.
Cricut makes heat transfer vinyl.
It is a material that you are going to use
with your Cricut machine
that you're gonna cut with your machine.
However, Cricut brand's heat transfer vinyl
is no comparison to Siser brand.
And actually, in my opinion,
Siser cuts better on the Cricut machine.
So I want you to know and understand
that just because you buy one brand of machine
and this goes for die cutting machines,
sewing machines, 3D printers, laser cutters,
whatever it is,
that does not mean that you have to buy
the same brand products to use in that brand of machine.
So that myth is busted.
The next myth is one that has been,
we have busted it before,
but I'm here to bust it again.
And that is the fact that aluminum foil
does not sharpen your Cricut blade.
Let me say that again.
Aluminum foil does not sharpen your Cricut blade.
So the myth is, if you haven't heard it,
if you take aluminum foil
and you wad it up in a tight little ball,
they had said, people had said,
that if you wad this aluminum foil up in a tight ball,
you take your Cricut blade,
and I'll go overhead so you can see it,
you press this button so it's out like this.
People were saying that by putting it inside,
stabbing it inside the aluminum foil,
it would sharpen your blade.
Y'all, this one, not specifically,
but Cricut makes a tungsten steel blade.
These are, this one may not be tungsten steel,
but these are steel blades.
Aluminum foil is not going to sharpen this blade.
If anything, it might be a very good way
to clean your blade,
but that is not gonna sharpen your blade.
It would be like me trying to stick a knife
in this aluminum foil,
thinking that aluminum foil is gonna sharpen my knife.
It's just not the case.
If you find that your blade is not cutting,
we're not gonna try to sharpen it.
Y'all, these are not expensive.
Once again, this piggybacks off of my last myth,
the fact that you don't have to use Cricut brand products.
Same goes for these blades.
You do not have to buy Cricut brand blades.
You can buy knockoff blades on Amazon.
They are our favorite.
They're super inexpensive,
but if you notice that your blade is getting dull
and not cutting well, guys, just change your blade.
We're not gonna try to sharpen a little tiny edge
on a blade that thin.
You just need to change your blade.
The next myth that I'm gonna bust for you guys
is the fact that I've heard some people say
you just can't apply vinyl to a curved surface
and make it look good.
Am I saying it's easy?
Nope, it's not easy,
but that is a myth because you can,
and let me show you how.
So if you are wanting to apply something
to a curved surface and make it look good,
first thing is you're not going to want
to have a solid piece.
The second thing is when you are going to apply it,
cut your transfer tape in lots of different places,
creating slits so that you can really manipulate
where this goes and you have a lot more room to work with
and can move your vinyl around.
So you can see that I have cut slits
in between like the words and things like that,
but it's still on there.
So now all I have to do, starting from my center point,
I can place this down,
but now I can use the slits to move this vinyl around
where I need it to go to give me a really nice effect
on my curved surface.
And you can see that I can really manipulate this.
Even if you get one of them down,
we can place this down here
and just keep working your way out.
It's okay if you have bubbles in your transfer tape,
that's what you actually want.
And you want your vinyl to go down flat,
but keep those curves or those bubbles in your transfer tape.
And if you do have issues like I had right here,
just a little bit,
all you have to do is just straighten those out.
And if you are still running into an issue,
the other little hack that I have for this
is just use a true control knife.
And we're just gonna cut a slit right there in that
and layer it over top of each other.
And you would never know the difference.
Now we're on the fifth myth that we're fixing to bust.
And that myth is once you have applied HTV to something,
you can't take it off.
And I'm here to tell you that we can bust that myth.
So let's go ahead and go overhead.
And I'm going to show you
how you can take HTV off of a shirt.
Now, I'm not gonna sit here and say,
it may leave a residue still yet,
but if you have an issue where you have messed something up
and you want to try to fix it
and maybe relay the same design back down over top of it,
this is how you're going to do it.
So we're going to start with our mini EasyPress.
We're gonna start at a heat setting of two.
If two doesn't work, you would then bump that up to a three.
But what we are going to do
is we are going to place our mini EasyPress inside our shirt.
We're gonna find an area to start working with.
And what I'm going to do is I'm going to hold that HTV down.
I'm gonna hold it over top of the heat source.
And all I'm gonna do is start taking it off.
Okay, now you can see that by doing that,
that actually started melting this HTV.
But what that is going to do
is that releases the adhesive on the back.
And it's going to allow me to come in here
and start picking it off.
Now, if you also run into this
and maybe it's melting the HTV,
let it cool down a little bit so it's not so melty.
And then you can start picking it off.
But I also know that two is gonna be way too high
for me to remove it.
So I'm gonna bump it down to one
and let that cool down to one
and show you how easy it can be.
So let's go ahead while this is cooling down,
I'm going to come in under the shirt.
I'm not gonna hold it directly on the G just yet,
but I am going to give it a little bit of heat right here
and then take the heat off.
And now you can see how easy that adhesive is coming off
just by adding a little bit of heat to the back.
And then you can start peeling this off.
Now, another thing that I do want to say
is this is peeling off actually pretty well,
but you can see how easy it can be
if you do mess up to remove your vinyl,
just putting your heat press
or your mini EasyPress back behind it
and just releasing that adhesive.
Now I'm not gonna take the time to take all of this off,
but it is possible, it is doable.
And all you need is your mini EasyPress.
Moving on down the list,
the next myth that I'm going to bust for you guys
is that DIY projects look cheap and not high quality.
Now, if I were to tell you guys
that every single thing that is on this door hanger
came from Dollar Tree, would you believe me?
It's one of those things that you can use cheap items
in the correct way to make high-end looking projects.
Now, sometimes you can use cheap stuff and it looks cheap,
but you have to do it in the right way.
So in my opinion, use all the Dollar Tree stuff,
but use your imagination, put a twist on it,
and you really can make cheap craft materials look high-end.
These are other two examples.
This one actually started out
as just a blank frame from Hobby Lobby.
We painted the back checkerboard,
and y'all, this 3D effect, and we'll go overhead,
you can kind of see how this is 3D.
You would never guess if I didn't tell you,
but that is craft foam.
That is what gave us that 3D looking effect.
So once again, a very cheap material,
but made to look high-end.
And then finally, the one you see over here,
y'all, this was a, right here on the back,
this was a clearance photo.
All we did, because we didn't like what it was,
we loved the frame, we did not like what was on here,
we found it in clearance, we painted it and added vinyl
to make it look like something that you might find
at Pottery Barn, West Elm, or something like that.
Just because you use cheap materials
does not mean that your DIY projects look cheap.
You just have to use inexpensive materials
and use your imagination to make them look high-end.
My favorite thing is going to these high-end stores,
websites, getting inspiration,
and then going to Dollar Tree
or going to Hobby Lobby clearance section,
seeing what they have,
and then imagining what I can turn it into.
Now, the next few myths that I'm going to bust for you guys
are actually gonna piggyback off of each other.
And the first one is the fact that crafting
is just something that you can do as a hobby.
And honestly, for a lot of people, that's what it is,
and that is their creative outlet.
If that is you, great.
We all love to use crafting as a creative outlet.
However, if you think that you can't craft and make money,
that is incorrect.
There are so many things that you can do and create
to make a little bit of extra income for yourself,
if nothing else, to pay for your hobby.
I'm telling you, crafting and creating
is not something that everyone can do.
So if you were gifted with being able to see things
and create things and craft things out of nothing,
you can utilize that to really make some money.
It doesn't have to just say a hobby.
It can be something that also brings you income.
Now, to piggyback off of that myth,
our next myth is the fact that it costs a lot
to start a business.
If you are just wanting to start out to see,
hey, is selling my crafts something that I want to do?
Then no, it's not expensive.
You've already invested in your machine.
You've already invested in some materials.
The only other thing that it's going to cost you
is the cost of the materials
to create the projects you are going to sell.
So it's not super expensive to start a small business
if you just wanted to do it with your crafting.
It can be very, very accessible,
especially if you do pre-orders.
If you are wanting to start a business
and maybe test it out one time,
create something that you want, post that picture,
and then you can do pre-orders.
What that means is that people pay you
and then you take that money to purchase what you need,
and then you can maybe make a few extra dollars
if you want to.
And then finally, the last myth
that I'm gonna bust for you guys,
once again, piggybacks off of the last two things
that we talked about,
and that is the fact that a lot of people feel like
the market is already too oversaturated.
I think that is just a cop-out for a lot of people
because I want to offer you this thought.
Just because there are thousands of artists in the world,
that doesn't make one artist stop creating
because the market is too oversaturated.
Because each artist has their own specific style.
Same thing with creating and crafting.
We are all different,
so my crafting style is going to be different
than your crafting style.
And some Joe Blow down the road
may like your style of crafting
better than my style of crafting.
So saying that the market is too oversaturated,
in my opinion, is a bunch of baloney
because we all have a style
and there is always something for everyone out there.
So I don't want you to use that as an excuse
or a lie that you're telling your brain
that you can't do it
because I'm here to tell you that you can.
If you have enjoyed this video,
leave me a comment down below.
Let me know what you think is a myth
that we may need to feature on our next myth-busting video,
or let me know what was your favorite myth
that we busted today.
If you have not already,
make sure you hit that thumbs up button,
subscribe to our channel,
and hit that bell notification
so that you can be notified
every single time we get crafty.
Also, if you're new here
and you want to learn more about Maker's Gonna Learn
and what we do,
click that first link down below.
Like I said earlier,
our main goal here on this channel
is to always bring you inspiration,
education, and motivation
to get your machine out
and get your money's worth
out of the investment that you've already made.
Not only that,
we love to bring you all this education,
but we also bring you hundreds of new cut files every month,
and our cut file library is seriously 20,000 plus cut files,
some really good ones if you ask me,
plus thousands of fonts that are at your fingertips.
So easy to use.
Make sure you check that first link down below
if you want to learn more about us
and what we do here at Maker's Gonna Learn.
We would love to have you in our community,
not only do we have the true best corner of the internet,
but everyone in our community is so loving and supportive
and really is there to see you win.
So like I said, check that out,
and we would love to have you within our community.
If you're ready to learn more about your Cricut,
check out this video here.