REVISION SUZUKI BURGMAN 200 CON PROBLEMA TIPICO DE LOS SCOOTERS

Two-Wheeler Technology
5 followers
1 Video View·Jun 1, 2025
REVISION A UNA BURGMAN 200 (ES LO MISMO QUE LA 125) Y CON EL TÍPICO PROBLEMA DE TODAS ESTAS MOTOS.
Suzuki Burman, we are going to do a review and it has a typical problem of these motorcycles, I'll tell you now
Every review of a motorcycle always starts with an oil change and filter, I personally
always
I always change the oil filter
In many places they will tell you and even mark that every two oil changes if the same oil is used
that a filter can hold you
two oil changes, it can hold you, it is that that expression of it can hold you and what need do I have
to have to be if it is going to hold me or not, but how much is an oil filter worth?
If an oil filter is worth two shits
Ten bucks
I always put it new on all my motorcycles
now when a client comes to me and tells me, don't change the filter, of course I don't change it, the motorcycle is his
I know I'm going to say something very, very, very stupid, but not so stupid because I've already seen and from a workshop
an engine flu, an engine flu
by the oil filter
it's something obvious
but here it has a hole
and here not
the oil has to enter through this hole and come out through here, through the mesh, let's say
then it comes out, sorry, it comes out and all the dirt remains inside what is the filter paper
we have seen, what motorcycle was David? a Daelim, was it?
a Daelim that instead of putting the filter
like this
they put it like this
the oil does not enter, of course it does not enter, it does not come out and it does not go above the engine
and the motorcycle came from a workshop
then
I know it's something obvious but it's something you have to keep in mind that a filter has a position so
filter to the site
there it is
and clean oil
The time has come to put oil on the engine, well, the Burman that in the carter itself
already tells you, it has a liter with two of oil, perfect, and what oil does the Burman have? the Burman has a 10-40
but this is where I come in
it is
fundamental
that the person you are going to take the motorcycle
understand
logically, understand motorcycles, that you know what happens to some motorcycles, to others, that you have
knowledge about this, logically we cannot know about all the motorcycles, but of the ones that we touch more
that we have an idea
said this
the Burman
spend oil
I have one, the Burman
spend oil
again, to premiere, you took the motorcycle out of the dealership and the motorcycle spent oil
don't get hot anymore, we've seen it 10 million times, not 1 or 2 or 3 or 20, 10 million
and there are Burmans of these, flu-like, out there, for being without oil, a lot
this one specifically also has
50,000 kilometers, 50,000 kilometers, they are not many, but they are not few, if we add
that they already spend oil in series and that it has 50 and so many thousand kilometers
the interesting thing happens
then that's where I come in
and what am I going to do? I'm going to modify
the oil, I'm not going to put a 10-40 anymore, which is what the manufacturer tells you that I should wear
we are going to put a little more fat oil, in this case
a 15-50
the oil is not
it is not spent for
magic, the oil does not boil like water and in boiling water
and it evaporates, no, the oil
is filtered
through the segments of the piston, through the valve retainers
through different places, it is filtered and when it is taken above the entire piston, it burns it
then it is an oil that burns
the fatter the oil is
the more difficult it is for it to pass through
those places
logically, because right now the first thing we would all do is, well, I'm going to put a very fat oil on my motorcycle, no
because it also has some cons, and that is that the thicker the oil
the longer it takes to get to all the places of the engine to lubricate it and a little more
it also takes time to get to the service temperature, but we are talking about
details and more in an engine of these that does not have much compression, or four cylinders, or blah blah blah
then in this case
I am the one who chooses to put a 15-50 that is going to come in handy for this motorcycle
we are going to open it directly, the eye is always stupid
we are going to change the air filter to the Burman
yes, it is understood, but I am going to show you
all the workshops, all the workshops without exception, how they clean the air filters
I put it, the workshops do not complicate us, you see this air filter, you see it
this is a brake cleaner
because the brake cleaner could also be cleaned, the good thing is that it evaporates, that is, it is going to enter, it is going to clean and it is going to
evaporate and it does not leave the filter soaked, then
you spray it whole
it is soaked right now
it looks like a bottle
but it is that the brake cleaner removes the ---- and now you take it
and look
now I clean it from the other side
half filter completely clean and half dirty, I'm going to clean the other part, I leave it perfect and I charge the client as new
Roman trick, Roman trick
We have the oil and the filter changed
air filter that we are going to put new, I have it here, but as we are going to work on the transmission
I do not put it to have more access
in a scooter we have the variator
and the clutch, this that I am playing is the
clutch bell, really, I have removed the nuts
this is the bell, this is the clutch
What is the problem that this motorcycle has and that surely those of you who have a scooter
in one way or another you have had this problem or you are going to have it
this man complains that when he is in a stopped traffic light, he puts the traffic light in green
he starts riding the motorcycle and the motorcycle starts
and when it is 15-20 meters
he stops at another traffic light, he is going to go out
the motorcycle gives him pulls, but it only gives him pulls when it is stopped, from stopped
to start walking
once he is already walking, he no longer gives pulls and the motorcycle goes perfect, but from stopped it comes out to pulls
What is that in a scooter?
This clutch
the clutch that is this, has a shoe here
another here, this and another here, three shoes
each shoe of these
inside, from behind, which is not seen well, has a spring
what it does is that when it starts to turn, turn, turn, those shoes are held
by the spring, they are like this, caught with the spring
as it starts to turn, turn, turn, turn, turn, there comes a time that at certain turns the spring begins to
stretch and the shoes, those three that you have seen, that are like this, start doing
like this, and when they do like this
they touch here inside the bell, and when they touch the bell, the bell
when they turn it, it is when they move the wheel
what happens? what is the fault?
that it has three springs, and one of those three is softer than the other two
then when it starts to take turns, turns, turns, it no longer opens like this
opens like this
it opens first one shoe before the other two, what happens? that that shoe, it alone
does not have enough force to hook
on the bell and move the wheel, what happens? that it goes like
it is trying to hook, but it is escaping, those are the
because it is when there are too many revolutions
and the other two shoes arrive, and then when they hook the three, it goes well
what to do in this case?
you have to open the clutch, which is to remove this central nut, and inside it has a spring of contrast
this fat thing, this big spring that you see here, that has this size, this spring is there inside
compressed, what is the problem? that when removing this washer, this nut
comes out up, you have to be very careful, you can get a good beating, be careful
then when we have it open
we change the three springs of the clutch and we close again, how does it close?
tighten it to death, and someone comes to help you, and you put the nut, or there is a special tool that bites the clutch
in this case, the owner tells me that they changed the strap very recently
there have been people who have told me, when you do like this with the straps and you tighten them, you break them
when a strap, is it okay?
you see that it does not have a mark
this strap is perfect
and what are we going to do? well, we are not going to change it to the owner, because the strap is perfect
the rollers of the variator
we put the hand from behind
to hold here, like this, and we take it out like this, because if it does not open and you throw all the rollers on the bike
ah, ----, it's a variator with screws, you have to remove the three screws you have
well
I'm going to open the clutch, I'm going to open the variator, we're going to look
to look, no, to change the springs of the clutch directly, the contrast spring also, and I'm going to check the rollers on the variator
we have the clutch open and here we have the springs, which we have to change, how do you get the spring out of there, if that is
a spring pull is called this, we take the hook of one
a spring
two and now we remove the third
and finally with all the transmission already mounted
with the springs here changed and such
the central spring, disgusting this
with the three little springs
small
and with the air filter
changed, everything is already mounted, to a 125 to change the spark plug
regularly, it's wonderful, wonderful
what happens is that when you start to change the spark plug, sometimes you discover things
I have raised the seat to this man
and I see here that they have put, maybe it has been this man, there he puts the date, the such
oil filter, air filter
air filter
I fall asleep and everything, I have to think about it, you already know that I have a new policy, I am not talking about another
air filter place, air filter, yes ...
Yes, yes, air filter, yes, yes, yes, yes, yes, five thousand kilometers ago, yes, yes, yes
It doesn't have a spark plug, but who's going to do the maintenance of this bike?
I'm already talking bad about the other one? No, no, no, I'm sorry, I messed up, I'm sorry, look at the old spark plug, I just took it out
If it doesn't have an electrode, it has to be in there, there is no electrode, it doesn't have one
A new one, look at its electrode, do you see it?
But to remove the spark plug, you need a little bit of skill and tools
You put a long plug like this, with a label, with a 16 on the tip to be able to articulate it, and I also have a 16-tonne plug
Because it has to be thinner so that it goes through the hole
I'm going to assemble it
Now we just have to reset the frame that warns you between check-in and check-out
Right now it has the light on, the oil change light, and the Burman only have one button on the frame
How do you reset it?
Contact off, we press the button, we leave it pressed, contact on, it does the check-in, turns on the light, turns off the light
You release the button, contact off, it's already reset, in 5,000 kilometres it will turn on again
