Part 1 of looking into a few ways we can light a small space on a budget. I'm hoping this little series will help people to think about the ways in which this can be achieved and be able to build on these ideas.
Mirrors and mirror board are great tools for bouncing hard light where you can't fit a whole lighting unit - there's a variety of applications for using mirrors in your lighting and in this video we can see how it helps to add a light "shooting through" the window, where we would otherwise have no tools to put a light outside of it. Now as with anything, this isn't perfect - depending on the size of the mirror, distance of light from that mirror and distance of mirror from blinds - it's tricky to light up a bigger area. But for close ups and detailed shots as shown in the video, this sort of thing can save you in a pinch if you have absolutely no way to put a light out of that window!
Camera: Blackmagic Micro Cinema Camera
Lens: Sigma 18-35mm f/1.8 ART
Genus Eclipse Variable ND Hoya UV/IR Cut Metabones Nikon G - BMCC Speedbooster
In the first part of our lighting a small space video, we'll take a look at a simple approach
to replicate the sun shining through some blinds and onto our subject.
So taking a look at our room, we barely have enough space here for lights.
Really, our only option is to place lights in this small gangway between the bed and the wall,
with the potential to boom lights over the bed if necessary.
The main area we're going to be able to place our subject is the bed,
and our window is just behind it, so we can use this window as a motivating source.
But, using big soft light, it's going to be a little hard to control in this space.
So let's go for something a little harder and more direct,
and try to replicate the sun shooting through the window.
Our room is on the second floor, and we don't have the tools to place a light outside of the window,
but that's okay.
If we use something as simple as a mirror,
we can place our light inside the room and bounce it back to where we need it to be.
First of all, we'll black out the window so that we don't have any stray light coming in.
We just used two layers of black material here to adequately block out the light.
Next, we can place our mirror, and turn on our light.
We used a Godox FE150 here.
Now, the mirror is reflecting our light,
but it's difficult to tell as we have lights spilling all around the room.
A good solution to this would be to add a fresnel or spot attachment to our light,
to control and cut down on our spill.
However, with a low budget, you might not have these tools,
so we're going to wrap some cinefoil around our lighting unit to control the spill.
Our example was quickly put together here and a little messy,
but you should always be careful of blocking fans and vents on your lights
so that they don't overheat.
Make sure you don't have any of your cinefoil touching the bulb.
You can see now that our light spread is far more controlled,
and our mirror is reflecting the light into a nice little pocket on the bed.
This already looks like a nice patch of sunlight coming through the window.
To cut down on the harshness of this light, and to add interest and mood to our image,
we can simply pull down our blinds to add some shape.
This could also be done with something like a kookaloris,
boomed in front of the mirror, if you need some more control over the pattern.
Now our blinds are quite thin and lightly coloured.
Because of this, as well as our light coming through the gaps,
our light is also bouncing off the blinds on one side,
and passing through the blinds on the mirror side,
creating extra fill light in our shadows.
This is actually useful, as it means we don't need another light for fill,
and it gives us the flexibility to push and pull our shadows in post
to convey a darker or lighter scene, whilst retaining a good amount of dynamic range.
Now because of the angle of our sunlight,
it wasn't 100% certain that we would always have a catch light in the eye,
depending on how the subject moved his eyes.
So we also added in an extra light,
boomed above the subject, to make sure we always had a little eye light.
We used a Godox LC500R LED tube, matching the colour temperature of our FV150,
boomed above, and bouncing from a tiny point on this paper lantern,
that we already had hanging from the ceiling.
We turned the output of this light right down, so it wasn't affecting our overall exposure,
but still gave us just enough to reflect in our subject's eyes.
So by utilising something simple like a mirror,
you're able to have light in places you might not otherwise be able to fit lighting units.
This opens up more possibilities for shooting in a small space like this,
and you could buy things like Mirrorboard and be even more flexible with where you can reflect your light.
Hopefully this has helped in giving you something to think about,
in terms of lighting a space like this.
Experimenting with things like mirrors is a great way to improve on your lighting skills,
and help you to think about how you can light a scene,
with the tools and restrictions that you may have.
If you're interested in how I colour grade my work,
I've just added a 21 minute tutorial video to my website, for just £8.
The tutorial takes you through the grading process in DaVinci Resolve, for two cinematic looks.
A more modern, punchy look, and a more classical, filmic look.
I've also included some practice DNG files, so you can grade along with the video.
Head over to www.robellisscinematography.com forward slash downloads to grab the video.