CINEMATIC Lighting Setups with ONE BUDGET Light!

Filmmaking Techniques
4 followers
1 Video View·Jan 9, 2025
Why do you think your favorite Hollywood films always look so stunning?
Of course things like cameras, lenses, and creative direction all play a major part.
But the single most important thing in creating a cinematic shot is the lighting.
Now most of us, like you and me, don't have million dollar Hollywood budgets, but that
doesn't mean we can't create beautiful looking shots.
All you need is one light and a few cheap accessories to turn a shot like this into
a shot like this.
And in this video, we'll take a look at how I lit these 7 shots using one single budget
light and a little bit of experimenting.
For each setup, I was using this Godox SL60 Mark II-D, an affordable daylight COB light.
You can find a link to this light down in the video description.
Let's take a look at the first shot, the nighttime bed scene.
It's a very simple setup where I had the Godox with the reflector attached, pointing at an
angle to a white wall.
That wall was serving as a bounce to create a soft light that could resemble the moonlight.
But there was a little issue with only bouncing the light off the wall.
Because the room is white, I don't want it to bounce everywhere, that's why I have this
blanket and a bounce board there to create a dark side on my face, so that I'm keeping
a bit of contrast there.
The dark blanket and the black bounce are serving as negative fill.
That means these two dark surfaces are actually removing light from one side of my face, as
opposed to regular fill, which adds light to a subject.
Regular fill or simply fill could be a white wall or any other white surface.
And I'll show you some examples of that further in the video.
But first, why do you think I wanted to remove light?
Well, if we look at the same scene without the negative fill, you can tell the lighting
is very even and flat.
This makes for a less interesting looking shot.
By adding negative fill, the light becomes more directional and helps sell the effect
that it could be moonlight shining through a window.
It also adds contrast to the shot by creating a dark side and a light side to the character.
Another thing that helps convey the nighttime effect is the blue color grade.
A warmer color grade turns the same shot into more of a morning shot.
And that brings me to the second shot, which is the morning shot.
But instead of changing the color grade, I wanted to create the effect that morning light
was shining through the blinds onto the character's face.
A great way to achieve this is by using a spotlight and a gobo, but these tend to be
quite expensive.
An alternative and much more affordable way to pull off this look is by using a mirror.
First, I used some cinefoil to ensure that the Godox light was directed straight at the
mirror, avoiding any unwanted spill on the wall.
This effectively created a spotlight.
For this setup, I was again using some negative fill on one side of my face to create a bit
more contrast.
In the next setup, the character is in the kitchen quite dramatically backlit by the
morning sun.
Here I placed the Godox outside, pointing at an angle towards the window.
I made sure that the light was at a height where it could mimic the morning sun and positioned
it in a way that the light would sort of peek past the kitchen cupboard in the background.
Since it was quite bright outside, I had to set the Godox at 100%.
And that did a pretty good job at resembling the sunlight.
But there are a few other things that play a big part in making this shot work.
So let's start from scratch and build this setup step by step.
This is what the scene looks like with normal daylight and the blinds up.
There's not much atmosphere in this shot, there's too much hard light coming through
the windows and the camera side of the character is too dark.
So let's start by closing the blinds a bit.
This will reduce the very harsh sunlight.
However, now the whole scene is much darker and the character is almost completely in
shadow.
I added a white bounce to reflect the light coming from the window and the Godox.
This helped with filling in or adding light to the shadow side of the character.
If we now take a look at the addition of the fill combined with the Godox blasting through
the blinds, we get something like this.
Which looks a lot better than what we started off with.
But there's even more we can do to make this shot extra atmospheric.
And it's this right here.
A little bit of haze in a can.
This works especially well with backlit scenes as it can create these rays of light.
Just have a look at the shot without the haze.
And then after adding in the haze.
Shot number four is again a very simple one to achieve.
It's great to create a dramatic look for a dark or scary or mysterious character.
Having a really bright side of the face and a really dark side of the face puts a lot
of mystery around the character.
The important thing here is to put the light at an angle towards your subject because that's
what will create that sharp contrast.
I mounted barn doors on the Godox light allowing me to direct the light towards the face and
limiting any light spilling onto the walls behind me.
If we look at the same shot but without the barn doors attached, you can tell there's
a lot of light spilling on the wall behind me and also on the shadow side of my face.
This makes the shot a lot less moody and dark.
I also used a white bounce again to fill in a bit of the shadow side of my face so that
it's not completely underexposed.
An important thing to note is that the character is positioned by the window.
Now why do you think that is important?
Your brain automatically connects the light on the character to the light from the window.
If the window wasn't there, it would feel less natural.
So the light on the character is now motivated, it has a reason for being there.
And I'll talk more about motivated light and how you can use it to create cinematic shots
when I show you the final setup.
Similar to the previous shot, this next setup is another simple way to create a moody looking
shot but with a softer light.
The technique I'm using here is referred to as reverse key lighting or upstage lighting.
Have a look at the setup and if you don't know already, see if you can figure out why
this is called reverse key lighting.
As you can tell, the Godox is not placed in front of me but instead placed more behind
me.
So it is lighting me slightly from the back and the side.
In a more classic lighting setup, the key light would mostly come from in front of the
subject.
However, in reverse key lighting, the light is placed slightly behind the subject.
This is another technique that you will see being used in a lot of films and it produces
a lot of mood in a shot.
I'm using a softbox to ensure the light hitting my face is not too hard.
If you don't have a softbox, you can use a white blanket or a tablecloth and put that
in front of your light and that will help to soften it up.
And again, I'm using a white bounce to fill in the shadow side.
And that white bounce is very important to change the mood of this shot.
You can see as I'm moving the bounce, it creates less or more darker shadows, making the shot
less or more moody and dark.
The importance of using the right fill or bounce material becomes even more obvious
when we have a look at the next setup.
In this shot, the character is actually being lit from below but by a light coming from
the top.
Let me explain that.
The Godox is almost pointing straight down onto the table.
That table is reflecting the light or bouncing the light onto the character's face.
It creates quite harsh and dark shadows around the eyes and this tends to result in a dark
and sinister look.
You'll see this in movies when they portray bad guys or scary characters.
Now there are two things we can play around with here.
One is the light source and the other one is the bounce.
So the first shot here is the Godox with the reflector dish mounted, pointing at the table
and bouncing the light back onto my face.
And you can tell that it's not the best looking shot, especially not for the look that I'm
going for.
One thing is that the light is spilling everywhere.
So it's not very controlled, just pointing at the table.
So the first thing I did was put on the barn doors so that I can reduce that light spilling.
And this is what that looks like.
So with the barn doors attached and the light bouncing off the table.
Now as you can see, this is a wooden table, so the light bouncing off this table is going
to be quite warm.
If you don't want that and you want a neutral bounce, you can put a white material on the
table like a white bounce board or a blanket.
That will make sure that the bounce light is not that warm or orangey.
If you want to go for an even darker look, you can change the white bounce material with
a dark bounce material like this blanket.
That is going to reduce the light reflecting and create a much darker shot.
And we can even go a different route by controlling that top light even more.
For example, by attaching some cinefoil and creating more of a spotlight towards the table.
This way we will have even less light spilling.
And this works really well to have kind of a character appear out of the dark and reveal
himself slightly into the light.
Depending on either a black or white bounce, the shot will become more or less dark and
dramatic.
Another great way to create interesting looking shots is by making use of practical lights.
And you'll see this very often in films because it tends to create a sense of realism in a scene.
It helps sell the illusion that what we are seeing on screen is not an artificial set
with artificial lights.
A practical light is any light source that is visible in the scene.
So in this shot, the practicals are these two lamps.
The purpose of these lights is to motivate the light that is in fact lighting the subject.
Because in most cases, as you can see here, the practical light itself is not strong enough
to actually light the subject.
The first thing I tried was setting up the Godox out of frame behind me and pointing
at a gold reflector.
This is what that looked like.
Not too bad, but a few things I was unhappy with.
One is that the light is slightly too harsh.
And the second is that it's not warm enough to match the practical light.
So I moved the Godox to the side where the practical light is and mounted the softbox.
Even though right now the light was much softer, this light was much too cold and didn't look
natural at all.
After all, we wanted to create the effect that the character is being lit by the lamp.
So I got some orange foil and placed it inside the softbox in front of the light, which worked
quite well to warm up the light.
I won't say that this is perfect, and ideally you would use a bi-colored light like the
Godox SL60 Mark II Bi, where you can just dial in the correct light temperature.
However, now the shot is looking pretty good.
But because there is a white wall on the shadow side of the character, it's actually filling
in that side too much.
So I decided to add some negative fill on that side to create more contrast, and I think
the result looks much better.
One last thing I want to mention about this setup is the second practical in the background.
That one helps to separate the subject from the background and also serves as a bit of
a fill light for that background.
Without it, the shot loses depth and it doesn't feel very complete.
So you can tell that there are a lot of possibilities when it comes to lighting a scene with a
limited set of equipment.
It's all about experimenting and using what you have to create something interesting.
Now I'm by far not an expert in the field, and I am learning as I go, so you're welcome
to leave your critique or advice in the comment section.
What are things you guys do to create beautiful light without a big budget?
Anyway, that's it for me.
Thanks a lot for watching, and I'll see you in the next one.
