Planting till the wheels fall off!

Agriculture
95 followers
Little bit of a sore eye. Gave her some antibiotics, some pink eye spray.
She just happened to be up by the corral this morning so I sorted her off easy.
Folks, dad headed out. He's planting my last 100 acres of corn. Right after this I gotta feed a
little hay then get the land roller hooked up because we're gonna start beans later today.
Dad's gonna finish those last 100 acres then we're gonna go out there switch the
planter to soybeans and start planting beans. Probably gonna be a late one.
One thing I don't love about this compact machine is the fuel tank is tiny. Let's just take note
before I get the bales, head down the road and then get back here.
We're just above that third bar. I bet you by the time we get back we're gonna be
probably close to that little tick between the third bar and the second bar.
All right. Yeah we're below that line now. We're getting pretty close to that little dash.
I feel like I can only do about eight to ten trips on a full tank. You know it's only two
miles down the road. I'm pretty sure our skid loader has a bigger fuel tank than this thing.
We're having a difficult time. I think we're gonna have to use the three point to lift this chain
to get that up off the ground. All right we got her off the ground. Look at that.
It just took about 20 minutes. Last year we ran a 50 foot hydraulic fold summers land roller.
This year we're running a 53 foot trail type. 84 30. I don't know what those numbers mean.
It's not 43 foot. It's not 30 foot and this is also not 84 foot. So yeah I don't know what that
number equates to. But we're up off the ground. We got a 20 mile drive so I suppose
I suppose we should be safe. Put those in.
Oh there's one on each side. Yeah real sturdy. It's also got a steerable back axle to help you
unfold it. Now you may be wondering well why Cole was it so hard to hook up? Well it's because a few
months ago when I unhooked it I brought it over there with a tractor that was lower to the ground
and I couldn't get that jack underneath it and I was in a hurry so I pulled the pin and I just
drove away and then the hitch just fell onto the ground. And I'm just lucky that the chain didn't
end up underneath it because I wouldn't have gotten that up off the ground to get that jack
on there if that if I didn't have access to that chain and the three point that lifts up and down.
My next option would have been to jog down the road a quarter mile, grab my compact wheel loader,
burn a quarter of the tank and get pallet forks underneath there and just lift it up.
Do you know why the apple is one of my least favorite fruits? Because you can't
peel it. Because back in the day when I had big gap teeth I'd take a bite and then I'd see
uh from the gap. Plus three-fourths of the apple would get wedged between your teeth.
It's kind of embarrassing.
Yeah well he asked you if you wanted to fix your teeth and you didn't care.
Then later when you cared you're like how come you never fixed my teeth when I was younger?
50 acres of corn left out here. About two hours from now we'll be switching it over to beans.
We have just enough time to change the oil on this machine get it ready for hay cutting season.
Tire's completely flat off the bead just enough to where I can't get it pumped up. I feel like
if I could get the valve stem out I'd get enough airflow where I could reseed that bead. I can't
find the valve stem tool over here at the north farm. Not sure if there's one over here.
Not finding one by the air tools anyway. Really no problem.
I can drain the oil and change it right where it's sitting.
If this would stick on there and I jumped on the tire I think I'd get it but I can't do both.
That just falls right out. It's a lost cause I'm wearing myself out.
All right oil's draining new filter on. We haven't changed oil on this windrower in two years. By
using a good oil which today we're dumping in Shell Rotella T5 with synthetic blend technology
has extended drain intervals and also us not putting too many hours on this machine
season we're able to get two seasons out of it. This is also what we put in our trucks as you
know. I can't believe at this time of year we're already getting 90 degree days but this machine's
used to that stuff you know there's a lot of June July days where it's 100 degrees. This thing's
running wide open cutting hay. So it's running on hot days we like to use the T5 has excellent
wear protection. I should probably put the plug in before I start dumping this would you say?
I think that's a good idea. All right number two coming in and finish it off with some one gallon
jugs. I like these one gallon jugs they're easy to handle you know especially during like harvest
season just having one of these in your truck to top off the machine in the morning. People ask
our recent video what we do with our used oil. We put it in this barrel and then we have a we know
a guy that uses this used oil to heat his shop so when this barrel gets full we call him and he
takes it. Probably just a couple weeks away from cutting. Don't need this machine just yet. When I
have more time and an extra helping of hands we'll get that tire pumped up and drivable. Nice getting
that oil change done and we're still a few weeks out from hang season but we got to start getting
ready early. We're gonna head back to the field. Dad's about done planting. This is the last pass
for corn this year. Hopefully we don't have to replant anything. We're gonna run up in the
building site and switch over to beans. We actually have beans on their way. It'll probably be up there
before we get there. We'll just dump the corn out of the boxes and let him dump seed in there and
then we'll change the the bowls for the from corn to soybeans. Last 16 rows for corn. Wonder if I
should lay the camera on the ground and let Cole drive over it. What's that you say? You're not
going anywhere because I pushed the wrong button? All right in that case we'll watch him make the
last pass. So those front spinning things are called trash whippers and that's exactly what
they're doing. They're whipping the trash aside, giving us a clean spot to plant in. Now in the
front you'll see him spinning and throwing stuff. Then you've got the gauge wheel for the depth and
on the very back you've got the closing wheel which actually is pressing the ground back on
top of the seed so you've got a good seed to soil contact. Then down in here, right there,
is a little guy that's gonna feed our cows this way. Him and 10 or 20 more of his friends. I just
barely got the seed dumped out of there, the rest of the corn, and now we're dumping in soybeans.
meters to soybeans. Everything on the display is ready to go. We got seed. We just got to drive
over there and we'll start planting. Row four we were watching for a while. It was over planting
and then all of a sudden it just quit working. I was gonna say that was probably the fastest
pit crew we ever did getting this switched over and then we had an issue right away and it was
because one bowl we didn't snap in. Easy fix. I've done that before though. Yes you have. Do you think
that was you or me that time? I don't know. We were both doing things and others things. It's
going well. It's about five o'clock. We got 50 more acres to plant but we're also gonna need
more seed. Probably won't get home till about 8 o'clock. A year ago that wasn't a big deal but
now these days that means I don't get to see my baby boy until the morning. I'll probably catch
up to dad because I got a roller that's 10 foot wider than him and I can drive a couple mile an
Lost a gauge wheel and more seed just showed up so dad's gonna go fill. I think I'm gonna roll what
I can and then we're probably gonna go home. By the time we get home and get back here with a
part it's gonna be an hour and a half later. It'd be almost 8 o'clock by then. That's gonna make
tomorrow a long day. We wanted to finish this field, make the eight mile hike back and be ready
for tomorrow. So when you hit a big rock with this thing you can hear it. It's just bong, you know,
kind of like you're hitting a bong. Like the drum, the percussion type. And now every time I hear that
I'm worried I just slapped the gauge wheel that fell off the planter deep into the earth. Hey pal,
your bearing went out. Looks like the planter's full of seed now. All dressed up but nowhere to go.
He said, look in that toolbox and by golly we got a used bearing. That's why you don't
throw nothing away. We got a snap ring plier. We got the bearing. We need a snap ring plier. Well,
I know we don't have one over here. That sucker's tight. This, I got this needle here. If you can
move it I can get a screwdriver behind it. I'm bending the needle. Paw? Yeah. Now we need another screwdriver perhaps.
And then we drive it this way, right? Yep. What are we driving though? There ain't much left. That helps a lot.
I've done that many times. You gotta get something heavy in there and drive it. I don't think it
really matters the size of this. I gotta get a good catch on that. I'm going for sharp. More talk,
hard part. Is there a reason you don't want to eat the bacon one? I can't get the snap ring in yet.
It took about 30 minutes to pound that, the outside ring of that bearing out. We didn't have
much meat to get a hold of. We called Kathy and Denny. They brought us some tools, chisels and
such and we worked it out of there and then got that used bearing in and we're gonna finish this.
Dad's only got six acres left to plant. I got about eight acres left to roll. Then we can get
the equipment up to the next field for tomorrow morning. Feels good to have that field done,
equipment moved over, make tomorrow a lot easier. Thanks for watching folks. Love to see you next
time. Have a good one.
