Easy Fig Cutting Propagation || Black Gumbo

GARDENING TECHNIQUES
6 followers
May 24, 2025
Come see how easy it can be to propagate figs. This method is so simple that anyone can do it. All you need are a fig tree cutting, a styrofoam cup, potting soil, a rooting hormone powder, and some way to seal the cut end of the cutting. This method is good for warm and humid areas especially.
Welcome to Black Gumbo Southern Gardening. Today I'm going to show you how to propagate figs.
Who doesn't like a good fig? Look at that big sucker. I'm going to show you how easy it is. Let's go.
I'm in the house today because it's kind of hot and muggy outside and there's a lot of noise. We've
got builders and barking dogs so I thought I'd sit at my kitchen table and show you how easy it is
to propagate a fig tree from cuttings. You just need a few things and number one you need some
cuttings. Let me grab my my cuttings I'm going to use today. Here are my two cuttings I'm going to
propagate today. I harvested these off of my Celeste fig tree which is a very hardy fig
tree growing out from my front yard and you can get cuttings from trees in your neighborhood,
friend's trees. You can get cuttings online. There are numerous places to buy cuttings and
well I tend to like my cuttings to be about that long about eight inches long and at least three
nodes on there. The node is very important for root development and this one's got one, two, three,
four, five nodes and typically most fig tree folks when they take cuttings they wrap them in a moist
paper towel put them in a plastic bag like this and they store them in the refrigerator and they'll
keep for months in there. The fig tree cuttings that I propagated not too long ago I kept those
for three or four months in the fridge before I got got around to planting them but yeah the
cuttings you can get in all kinds of places. There are thousands of varieties of fig trees
and man it's just so great when you get you find the ones you really like. Well let me show you
what to do. First you're going to need a container. Now I've used all kinds of methods of rooting figs.
Some are very complicated and very involved. You know there's a three cup method that I first used
that used a humidity dome a clear humidity dome and and you know I've found I just don't need that.
I've also heard of folks making a big fuss over what kind of growing medium that they start their
figs in. Some people do vermiculite and perlite mixture and that's it. Some people do sand,
some people do coco coir and perlite. I'm just using regular potting soil just a bag of potting
soil and it works for me. It's uh it works for me. I also don't worry about the humidity because
what I'll do is I'll take my potted fig tree or my propagated fig tree cutting and I'll set it
outside on my front porch. That way it gets natural humidity because it's humid here.
It's warm and I can keep the soil watered and it grows in the environment that it's going to have
to grow in anyway. I don't have to worry about any kind of humidity or anything. It's already
acclimated to being outdoors. I'm using these styrofoam cups. The only downside to these
is you can't see the roots. You have to just trust the roots are there or you can make a slit down
the middle and take a peek and then you can just put it back together. If the roots aren't there
put a piece of tape over you're done. But what I do is I put some holes in the bottom and there's
some holes on the bottom of their of the cup as well but I put holes in the bottom so that I can
water this and keep that soil moist. You don't want it really to dry out. You want to come along
and make sure it's got moisture in it as the fig tree grows roots down there. That's the thing we
want first is roots. If you're growing a cutting in a medium like this and you see leaves that's
not necessarily a sign of success yet. Leaves will come on quickly before the roots sometimes
so you want to make sure you have roots. So I'm just using a regular potting soil
and some people say that a regular potting soil because of the organic material that's in there
will pose a risk of of rotting your cutting because there's organic material bacteria already
in here and that's why some folks like to use vermiculite and perlite because they're they're
largely sterile. But that's all we're going to do today. We're going to use the potting soil
method and the cup method and it's probably the easiest method that I've used. I have about a
90 percent success rate with this method. All right so what do we do? We first identify where
is the top of the cutting and where is the bottom. You can see the bottom of my cutting here
is getting a little discolored so ideally I'd trim that off. This is this is kind of a bonus
cutting for me. I've already got cuttings going so I'm going to leave it there now but if if I was
if I was really really hopeful for this Celeste to go without rotting or without mildew I'd cut about
oh a half inch of this off off the bottom. But here's what we do. Beneath a node down here you
scrape the bark off and expose the green cambium on a portion of the plant. You can see we're
exposing the green cambium and I'm going to expose a little of it up here on this node.
You don't have to go deep. You just want to get some of that green cambium exposed. Now I'm not
going all the way around. There we go. We have the green cambium exposed. That will encourage root
growth. I'm going to take a rooting powder. This is a rooting hormone. Some people use honey.
I like this stuff because it's cheap and this is almost vital. We're going to take some rooting
powder and get that ready for our cutting. We're going to take our cup with the name of the variety
and the date that we started. I'm going to take a hole maker 5000 and I'm going to make a hole in
here. I like to get a hole done opened up before I put the cutting in so I don't scrape all my root
hormone or rooting powder off. I'm going to make a hole about the size of my cutting.
In my experience, this is the ideal size. The thickness is about as thick as your finger,
maybe a little bit thinner. A little bit thinner works too, but anything fatter than this I've
never had good success with. I'm just going to take my rooting hormone, my rooting powder,
and I'm going to put it on the bottom of my cutting. I'm going to shove it in the hole there
and we'll pack the soil down around it. That's simple. That's as easy as it gets.
Now what I'm going to do, I'll water this in, not super wet, but just enough moisture down there
to keep this soil just slightly moist, just a little bit moist. These fig trees come from
arid areas in the Mediterranean originally. They're used to being a little bit dry,
but to get those roots started and encourage that rooting, we're going to have to keep these
hydrated. Let's do another one. Again, we're going to make our hole all the way to the bottom.
Don't be shy. All the way to the bottom. This variety, Celeste, is probably the most common
variety here in the South, and that's because it loves the South. It's a very strong plant
in the humidity. It is very cold hardy. It actually forms the basis, the mother plants,
for most of the varieties that LSU is developing, like the LSU Tiger Stripe, LSU Panache,
LSU Gold. I've got some of those started, some of those LSU varieties. I'm sure they'll do well
here since they derive from the Celeste. The Celeste is actually a very tasty fig. It's a
sugar fig. My tree is huge. It's been in the yard for over 15 years. I'm going to put some powder
on there, and I'm going to put it in the hole, pack the soil, and that's that. Now we have to
water them, and I'll be done. What's next with these figs? Now that we've got them watered in,
you could probably have success if you stopped right here, but there are steps you can take
to ensure greater success. That's a large surface area exposed. The inner wood is exposed to air,
and this cutting can lose a lot of its moisture, and you can seal that. I've seen people use wax
to seal it with, but I like this parafilm, this laboratory film. It's a stretchy film,
and you don't need much. I'll just cut off a little square here, and it stretches,
and it becomes real thin. What I like to do is cover and wrap this stuff around. Let me
cut that tag off. I don't need that much. Cover it and wrap it several times,
and don't worry if you're covering up a node because this plant will punch through that
parafilm. What this does is it ensures that you're not going to lose a lot of moisture out
of the top of your cutting. Now I have a greater success rate when I do this with cuttings that
have a flat top like that, but not all cuttings are like that. The best cuttings are cuttings that
have a bud at the end. When you get the end of a good branch and they have a bud there,
that's the best kind of cutting. You don't have to worry about losing a lot of moisture.
This one you can already see. It's weeping at the top, some of the moisture that's in there,
so I'll have to wrap that one too. What can you expect with these cuttings? After about
four weeks in a cup like this, you can expect to see some signs of life. After about five weeks,
you ought to see some greenery, and after about six to seven weeks, you can expect there to be
roots in there. Let me show you what it looks like when you have a successful propagation.
These are plants from my latest propagation efforts. I've got an LSU Tiger variety right here.
I have a Shasta Cranberry right here, pretty plant. I have an LSU Tiger, another Tiger,
is that two Tigers? Yeah, I've got two of those. I've got two of each of these,
and I have a Firehouse, and look how beautiful that is. If you look closely,
let me get up and show you, you can see what I mean by the plant will punch right through that
parafilm. I had wrapped this one, and you can see it just punches right through. You can see this
one I wrapped, and it didn't have to punch through because the node was beneath the parafilm wrap.
And then what I was talking about is when you have one that comes from the tip of a stem,
you don't have to wrap it at all because there's a bud at the end, and that starts to form your
tree. This is about the size when I would consider potting these figs up into the next size container,
when they're about like this. I've already checked, these do have good root systems.
This is a successful fig propagation right here, and I really love it.
Now there are some things you have to consider when propagating figs,
namely cuttings are taken when the fig tree is dormant. You can hypothetically and possibly
take cuttings from a tree that is actively growing, but typically you want to get your
cuttings when your tree is dormant. Its leaves are gone, it's asleep, you can actually see what
you're doing when you're pruning, and get your cuttings and look for them about the size of what
you see here. These are about eight inches long, about the size of your pinky finger,
with at least three or four buds on it. When you purchase cuttings, if you're purchasing cuttings
in the middle of the summer, be careful about buying those. Typically cuttings are available
in the late winter, early spring, and even right now at this moment, there are still some cuttings
available now in May, but after May, I don't know if I would trust the cuttings that are out there
for sale. Why am I doing a propagation video in the early summer? Well, because my example is I
wanted to show you the success of what you can expect, so I did these six to eight weeks ago,
and I wanted to have a video that just doesn't show you how to start the cuttings with a stick,
and not show you results. This is what you can expect when you propagate figs,
and about this size is when I would start potting these up into a different pot. So,
figs, you got to love them. Hey, thanks for joining me on Black Gumbo Southern Gardening.
I know I haven't been putting together a lot of videos, but, you know, we're still doing things.
We're doing lots of interesting things like propagation and fruit, and I wanted to share
that with you. Hope you have a great gardening day, and I'll talk to you next time. Bye-bye.
