How to prune figs in a cool climate for first (breba) crop fig production

Gardening & Growing
200 followers
Hi, I'm Bob Duncan. This is Fruit Trees and More, just north of Victoria, British Columbia, Canada, and we're going to talk about pruning fig trees in a fashion that's suitable for our climatic conditions here on the west coast.
Fig trees do well here, but only the Braba crop, or the first crop, actually ripens. There's not enough summer heat in our climatic zone to ripen the main crop figs.
So the training system I'm going to describe for you is adapted to our growing conditions and maximizes production of Braba crop figs.
So the Braba crop is produced on the previous year's wood. So if you look at this branch here, you'll see at my finger these small 2 or 3 millimeter protuberances, which are actually the figs that are going to be produced next year.
So on this particular branch, between my hands here, this branch here could easily produce a dozen Braba crop figs on just a single one-year-old branch.
So on a tree like this that measures about 2 meters in height and 3 meters in width, there are probably at least 50 of these one-year-old branches that I'm going to retain.
This tree has, over the last couple of decades, reliably produced at least 400 ripe figs in the month of August.
So this happens to be a Desert King fig, which has a very large Braba crop, and is probably the most desirable variety currently available for our climatic and growing conditions here on the west coast.
So now what I'm going to do is describe how you end up with a tree of this size and shape.
If you notice, the branching on this tree starts at ground level. The branching starts about 15 to 20 centimeters above ground level, and you'll see that there are 3 separate branches right here.
So what that means is, either when you purchase a fig tree, or you propagate it yourself, you need to induce branching very low to the ground.
What you're trying to do is build up a permanent structure that has an open center and has multiple branches.
So you'll see it starts with 3 branches here, then I pruned it up here, and there's 3 more branches, and I pruned it up here, and there's more branches.
So this particular tree has about 24 permanent bearing branches, as you can see here.
Now, what you need to do to get a tree like this is, in the first 3 or 4 years, concentrate on building the structure of the tree.
Don't worry about actually trying to produce figs. Just concentrate on building the structure.
So, spend the first 3 or 4 years building up this structure, and then after that, the pruning is just simply...
All of the 2-year-old branches that bore figs the previous year, that grow directly from this permanent structure, get stubbed back.
I'll show you an example. If you follow my hand here, my finger, there's a branch that was a 2-year-old branch last spring, and was stubbed back.
You can see there's 2 branches that have grown from that stub.
This branch right here, again, will probably produce at least 10 figs, and this one maybe 5 or 6.
So, in that fashion, you're constantly renewing the wood on a biannual basis.
So, 2-year-old branches get stubbed back to 2 or 3 centimeters, which forces 1-year-old shoots that will produce figs the following year.
In the meantime, the branches that were stubbed back the previous year and forced 1-year-old branches, those 1-year-old branches, like this one, you retain for the current year's production.
So, here's a 2-year-old branch that's going to get stubbed back, and here's a 1-year-old branch from one that was stubbed the previous year.
So, let's actually go at this, and I'll show you exactly what you do.
So, here is a Felco saw, and I also have a pair of Felco pruners here that I use to prune.
So, here's a 2-year-old branch right here. You can tell it's a 2-year-old branch. The bark is a slightly different color.
It's also a much heavier caliper, and if you follow it out, you'll see that there's sometimes some level of branching as well.
So, here I'm going to actually cut this branch off with about 2 centimeters above where it starts its growth.
Okay, so there's a 2-year-old branch, and you can see that there's what's left of it, and at the base of this stub this coming summer, a 1-year-old shoot will grow out, and that will produce the figs for the following year.
Now, in addition to removing all the 2-year-old branches that bore figs the previous year,
you also will want to remove some of the weaker 1-year-old branches, because they're not going to produce significant figs this coming year.
So, here's a weak 1-year-old branch. You don't want that. Here's some other weak ones here. You don't want those either.
So, what you want to do is retain well-spaced, very vigorous 1-year-old branches, because every one of those is going to produce between 5 and 10 or more figs.
So, the more vigorous they are, the more figs they're going to have.
Any hanging branches, any weak branches, you definitely see here's a hanger, and it's weak as well, so that definitely comes off.
There's a weak branch there, so off it comes. More weak ones.
Okay, so you want fairly well-spaced 1-year-old branches. So, again, here's some more 2-year-old branches that need to come off.
So, there's another 2-year-old branch. You can see they're much heavier caliper, and often they have branching on them.
Now, if you kept those 2-year-old branches, at the tip of them there is 1-year-old wood, and you would actually get figs on there.
But the problem with retaining that is the tree just gets bigger and bigger and bigger.
This approach, you've got a permanent structure, and you're always coming back to it on a biannual basis, so all the 2-year-old wood comes back to it.
In that way, the tree never gets any bigger, and you can maintain the tree at a height where you can stand on the ground and pick all the figs.
So, that's basically the system that we've developed here that works really well for BrabaCrop fig production here in the cool northwest marine climate.
