Hōryūji | The World's Oldest Wooden Architecture

Antique Masterpieces
23 followers
2 Video Views·May 18, 2025
Hōryūji, 693–710, Nara, Japan
speakers: Dr. Beth Harris and Dr. Steven Zucker at Hōryūji
We took a car and drove about 40 minutes
from the center of the city of Nara,
which was in the eighth century, the capital of Japan.
And we've arrived at the oldest Buddhist temple
in Japan, Horiyuchi.
This is a large complex that was originally built adjacent
to Prince Shotoku's palace.
Prince Shotoku is a formative figure
in the history of Japan.
He was not only part of the imperial family,
but he is widely credited with being one
of the primary figures who established
and promoted Buddhism in Japan.
We're looking into the central courtyard
where we see three structures, a five-story pagoda,
a kondo, or the main hall, and behind that,
the lecture hall where the monks would learn
the teachings of Buddhism.
And what's so special about being here at Horiyuchi
is that, in a way, we're here at the very beginnings
of Buddhism in Japan and the beginnings
of the establishment of Japan as a united nation state,
so Buddhism as a unifying force that came to Japan
through northern India, where it began,
through China, Korea, and then into Japan
in the sixth century.
Not only is this site associated
with early Buddhism in Japan,
but it is also extraordinary
because these are the oldest wooden buildings
in the nation.
One of the earliest Buddhist sculptures in Japan
is held in the kondo here at Horiyuchi.
It's a sculpture known as the Shakya Triad.
It shows the historical Buddha, Shakyamuni,
known as Shaka in Japan, with a Bodhisattva
on either side.
By legend, the face of the Buddha
has the features of Prince Shotoku.
In fact, there's an inscription on the sculpture
that says that it was made just at the moment
when Prince Shotoku was dying.
And it strongly resembles Chinese sculptures,
specifically Northern Wei sculptures,
for example, those in the Longmen Caves.
So we see the important influence of Chinese sculpture,
Chinese architecture here in the early years
of Buddhism in Japan.
Let's focus on the pagoda
because the pagoda is original in its entirety.
A pagoda can be understood as a Chinese
and Japanese variant of the Indian stupa
that historically was understood
to hold the relics of the Buddha.
This pagoda is enormous,
and its structural material is entirely made out of wood,
which is phenomenal, especially when you consider
how far out those eaves are cantilevered.
Those eaves are supporting very heavy ceramic tiles,
and the weight of the wood itself is phenomenal,
and yet there are no posts on the exterior corners.
This is fully self-supporting.
The workmen who produced it sought out
the largest, strongest trees in order to support
the massive height and weight of this building.
They sought out hinoki trees from the top of mountainsides,
but only the sides that were exposed to the most wind.
That's because trees that are exposed to strong winds
become stronger themselves.
The main support in the building is known as the heart,
a single tree, and then that is surrounded
by a series of enormous planks from other hinoki,
and all of that rests on a large circular stone.
Within that stone is carved a cavity
that holds the holy relics of this building.
Let's talk about the wooden brackets
that support those cantilevered eaves.
That bracket system is what allows
for these massive eaves to be supported,
and what's lovely about them
is that they're completely exposed to our view
so that we can see the mechanics of the building.
And in fact, they're astoundingly beautiful.
They form a kind of decorative skin for the pagoda
that engages our eyes.
It's important to understand that the core column
does not hold this building up alone.
There are a series of columns that are aligned
with the inner walls of the pagoda,
and those exterior columns then support the brackets,
and the bracketing system is complex and multi-storied.
You can see that there is a bearing block,
and upon that bearing block, a series of branches,
almost like arms, that come out and split themselves,
almost like the branches of a tree,
and of course, all of this is made from the wood of a tree.
Then you have a series of beams and rafters
that tie the brackets together.
You can see what is known as a tail rafter,
which is that diagonal that slopes down
from the building and outward.
These were trees that came from mountaintops
at some distance, and although we don't know the location,
we do know that pieces of wood this large
would take an enormous amount of energy
to move to this site.
What a pagoda does is draw our eye upward.
That makes sense, given its function as a place
where the relics of the Buddha reside,
this link between the earthly and the divine,
and that finial at the very top that tapers
so gracefully upward and draws our eye up
also has a symbolic meaning.
And part of that finial refers to the upper worlds,
which is a concept that comes from the Hindu
and from Buddhism, and that finial really marks this.
