If you are looking for an aviation themed gift and want to support this channel, check out the Military Shop by using our affiliate link https://militaryshop.com.au/?ref=AMAHA and you can also use our coupon code AMAHA for a discount!
____________ Disclaimer ____________ Original footage and recreated scenes may not be 100% accurate to the event being described but has been used for dramatic effect. This is because there may not have been original footage of a particular event available, or copyright prevents us from showing it. Our aim is to be as historically true as we can be given the materials available.
Copyright disclaimer under fair dealing sections ss 40/103C, ss 41/103A,ss 42/103B of the Copyright Act which includes research, study, criticism, review, and reporting of news. Copyright remains with the respective owners. These videos are made for educational purposes only.
The Australian Military Aviation History Association is a not-for-profit association with the intent of recording, preserving and promoting Australian military aviation history.
The F-15 is undoubtedly one of the most successful modern fighters.
After several decades of service, it has scored dozens of victories,
yet never been lost in combat.
With an impressive combat history and plans to continue the program with improved versions,
the design has clearly been a winner.
In the 1970s, just as the original design rolled off the production line,
there was already plans to improve upon what many believed to be the most promising airframe
America had ever produced.
The United States Air Force wanted to build on the early F-15 airframe
something of a demonstrator for what could be possible in future fighter designs.
This coincided with other proposed research ventures in the mid-1970s,
which were focused on understanding and utilizing supermaneuverability.
During the early 70s, many fighter aircraft designers were oriented around high-altitude,
large-stores capacity for beyond-visual-range combat, known as BVR.
Much of the motivation for this research came from the surprise emergence of the Soviet MiG-25,
an aircraft which shocked many in the West.
While much of the focus was now on long-range combat,
some designers still believed that dogfighting and high agility would be necessary.
This would result in the F-16 Fighting Falcon program in 1972.
The success of the F-16 would help to redirect attention away from pure BVR combat
and towards a mixture of both long-range and short-range capabilities.
The first of the F-15s to roll off the production line would indeed be maneuverable.
Although it couldn't keep up with the later F-16 at higher angles of attack,
it was nevertheless a great platform, and researchers saw much potential in it.
By the mid-70s, it was believed that surpassing the constraints of conventional aerodynamic systems
would be key in the future of aerial warfare.
After all, supermaneuverability would allow for tighter turning circles,
faster deceleration, and better control during unstable flight.
One major point of focus for maneuverability was thrust vectoring,
adjusting the angle of the engine nozzle to aid in maneuvering the aircraft
in ways that the conventional control surfaces could not.
This idea came from rocket technology.
Just as the introduction of variable jet nozzles allowed for better control of thrust,
a vectoring element would allow for increased movement by redirecting thrust.
Throughout the late 70s,
Langley Research Centre became the primary department researching thrust vectoring,
and later implemented the technology into the F-15B airframe for testing.
The approach taken with the modified F-15 would be square-shaped nozzles,
allowing for what would be known as two-dimensional thrust vectoring.
Put simply, this meant that thrust could be directed on a single axis,
helping aid the pitch of the aircraft.
For context, this same type of two-dimensional thrust vectoring concept
is the basis for slat engine nozzles on the F-22.
This early 1977 research programme produced an F-15
with a powerful set of thrust vectoring engines capable of 2D vectoring.
These nozzles could redirect thrust up to 20 degrees up or down.
The success of this early design gained the attention of others in the industry.
In 1984, McDonnell Douglas was awarded a contract to develop a variant of the F-15
which would use thrust vectoring technology.
It would be called the F-15 Stoll MTD,
referring to the short take-off and landing technology that would be developed,
and the improved manoeuvrability the programme hoped to achieve.
Taking the advances made at Langley,
the same two-dimensional engine design was integrated into the aircraft,
followed in 1988 by the addition of forward canards.
This technology demonstrator proved a success.
The earlier F-15 would need over 7,000 feet of runway to land,
this prototype could land with just over 1,600 feet of runway.
Take-offs were also shortened,
capable of taking to the air at speeds as low as 42 miles per hour.
The demonstrator was 25% faster than a standard F-15 at take-off.
In 1991, the aircraft underwent a series of tests
to see just how capable these technologies actually were.
Among the many impressive results were the ability to reverse thrust in mid-air,
helping the aircraft to rapidly decelerate and able to land on a 500-metre runway.
With the programme proving a success, and the results promising,
in 1993 it was decided that the Stoll MTD airframe would be rebuilt
into what would become known as the F-15 Active System.
The aircraft was handed over to NASA for further development.
Initially, much of the aircraft's agility capabilities were left unchanged,
whilst designers used the aircraft to test cockpit tech for the new F-15E Strike Eagle.
In fact, the entire cockpit was rebuilt to replicate that of the Strike Eagle.
After some time, however,
NASA would begin implementing further technological improvements to the platform.
The most important change to the aircraft were its engines.
Having seen the impressive results of two-dimensional thrust vectoring,
it was decided that these would be upgraded to three dimensions.
A pair of Pratt & Whitney Pitch-Yaw balance beam nozzles,
designated F-100 PW229, were selected.
The nozzles were no longer limited to vertical movement.
They could move in a full 360-degree arc, redirecting outflow in any direction.
The NASA Active Flight Research Programme report stated that
the F-15 active flying qualities are significantly improved over production F-15 aircraft.
Aircraft response is crisp and heavily damped throughout the research flight envelope.
In fact, in supersonic flight,
they predicted that the addition of canards improved the stability of the aircraft by over 100%.
The Active Programme ended in 1999.
The aircraft would be used in what was known as quite spike research,
and later go on to become the F-15 IFCS, the testbed for further research.
This time, the F-15, still equipped with 3D thrust vectoring engines and canards,
was used to develop a neural network system
as well as improving the safety of an aircraft during stable flight.
The aircraft, which was the sixth F-15 off the production line, retired in 2009.
It was, at that time, the oldest F-15 still flying,
having not only been used in various test programmes,
also helped produce the F-15E Strike Eagle.
It was never intended to be a testbed for F-15 upgrades.
It was designed to give insight into future projects,
and it is likely that it has influenced many modern designs.
Today, thrust vectoring engines have made their way
into a number of fighter aircraft designs in the United States and abroad.
Multiple variants of the Sukhoi Su-30 developed for foreign nations,
such as Malaysia's Su-30MKM and India's Su-30MKI,
use a two-dimensional thrust vectoring system.
A three-dimensional system is also used in the Su-57.
It may be that not only American,
but also Russian and Chinese designers have the F-15 agility programme to thank,
at least in some way, for the breakthrough research
into two- and three-dimensional thrust vectoring and supermanoeuvrability.