Taking care of a lot of trees and shrubs is no easy task. It’s an ongoing effort to keep the yardscape from being overgrown and keep the plants and trees healthy.
I’ve seen a lot of enthusiasm for the cordless power pruners that several tool manufacturers offer. I have the DeWalt® 20V Max System set up for many tools in my maker’s shop and for around the house, vehicles, and yard. These include a tire inflator, leaf blower, chainsaw, vacuum, string trimmer, and pole saw.
I’ve had success with those tools, so I thought I would give the DeWalt® cordless pruner a shot. I got the DeWalt® DCPR320 Cordless Pruner.
I bought it as a bare tool for right at $140. It’s not cheap, but after seeing its reviews and opening the carton, I felt good about the investment. It weighs about 2-½ pounds (just over a kilogram).
My first thought was how much fatigue this would cause. It is over 3 pounds with a battery attached, so it has some heft. As it turns out, it is balanced well, and the muscle memory develops quickly to activate the safety switch trigger and position it to do the cut.
A cut takes one second. It moves fast and is designed to cut up to 1-½” (4 cm) of green wood. The tool's backend reveals its ancestry - the offspring of the DeWalt® family of drills. The front end houses the gearing and mechanism operating bypass-style coated blades. Should you need to replace the blades, there is a tool blade change nut on the side. So far, after a significant amount of spring pruning, the blades are going strong and haven’t developed any nicks.
It also has a single LED light for low-light conditions, such as pruning in the cool of the day or reaching the interior of a shrub. It’s handy without being gimmicky.
Battery life has been good. Using a 5Ah 20V Max battery gave me a couple of hours pruning various branches and stems at a moderate pace. I keep batteries on the multi-station charging system in our shop, so a battery swap-out would be a short break from work.
There are a few things that I don’t like, but I’m not sure if they could be done differently.
First, this tool operates very quickly (which is good!), but you need to be constantly aware of the position of the blades. With a 1-second cycle time, these allow you to move along very quickly, with high productivity and low fatigue. The downside is that if you have fingers grasping branches, you’ll need to steer clear of them consciously. It’s easy to get going and get careless, and a tool like this would be unforgiving.
Second, the mechanism that allows the blades to operate so powerfully does take up some space at the nose of the tool. This means getting the blades positioned where you want them in a tight space can be difficult. Sometimes, the cut will not be as flush as you would like.
So far, I’ve been favorably impressed with the tool. Although I’ve done a lot of pruning this season, I still have much to do. I’ve learned so far that fatigue is significantly reduced, and because you are not swinging open the handles of lopping shears, you move quickly.
The most significant inconvenience so far is that the pile of pruning offcuts builds up quickly and calls for a haul off to the chipper or the mulching pile.
The actual test will be how this tool holds up through the season. In about a year, we’ll do another review of the tool to see what, if any, problems or shortcomings have developed. We’ll let you know how it has turned out owning and using this tool.
You can check out that episode HERE:
COMING 3rd Quarter 2026!
JUST DO IT YOURSELF!
Hey, Der Farmer Jay from der
farmerj.com. I decided to expand my uh
tool set of the 20 volt DeWalt, but this
time we're out in the garden in the
orchard uh getting their cordless
pruner. Well, we're going to walk you
through it and see what we think about
it. Stay
[Music]
tuned. Hey, Der Farmer Jay here from
dirt farmerj.com. I love good tools and
I've had good success with the DeWalt 20
volt cordless uh tool lineup mostly for
the shop, but things out in and around
like their blower, their pole saw, all
those sort of things. I decided to go
ahead and add this on for the many
prunings that we have to do around our
yardscape. And we're here in the apple
orchard at one of the charities that we
work with. Uh and there's a lot of
things that need to be pruned here. Uh,
but we're going to walk you through and
just tell you what we think about this.
So, a couple things right off. Uh, the
tool is about three pounds without the
battery. So, you add the battery, if
that's another half pound, quarter
pound. Uh, 3 lb. It's fairly heavy. Um,
but again, it's doing all the work for
you when it cuts. Uh, and it cuts very
quick. So, the way that that cycles is
you'll see right here, there's a safety
switch. You have to pull that down with
a finger down below. And when that
safety's engaged, then this can operate.
That means it's tying your hand up. And
there you go. That operates. And if you
pull back the trigger, it closes. If you
let it go, it opens. So, if I keep it
closed, it's going to keep it closed. If
I let it open, it's going to stay open.
Overall, the tool is proportioned pretty
well. Feels good in the hand. If this
back portion looks familiar to a drill
set, that's cuz they're using the same
ergonomics. So, the the components that
drive the uh cutter up here are all
here. It's a little front heavy. When
you turn it on, there's a light that
does come on uh there. So, as it starts
to get a little dark or you're in the
interior of a a bush, that might help
you a little bit there as well. Now, one
thing I'm going to mention, this is a
little bit bulky. It's a little hard to
get right up next to something. Um, but
with a little bit of muscle memory, I
think it'll work just fine. But let's go
ahead and put it to work. All right,
let's go down here lower on this down
here and see what we
get. Okay, cuts pretty quickly here. I'm
going to take care of this one on the
back side real
[Music]
quick. Puts a lot of force very quickly.
You would not want your fingers near
there.
[Music]
There's a good example of where it's
hard to get up next to it, but it did
okay anyway. So, you can see a lot of
this is cut off. I'm going to walk
around the back side of the tree and
prune those off real quick,
[Music]
too. So, as you can see, it moves very
quickly. Obviously, you don't want your
other hand anywhere near that. That
could do a lot of damage very quickly.
It does remove branches very quickly. Uh
so the trade-off of the weight of over
three lbs could be worth it with the
action of lpping shears or pruning
shears. So there's a trade-off of the
weight that you're carrying versus the
work that the cutter does itself using
the battery power. Uh depending on the
battery kit that you use, I'll publish
that in the description down below that
has the average run times or what they
publish for the different amp hour
batteries. So you can see how long it
can be out in the field before you need
to swap out for a fresh battery.
Overall, we think we're going to be
impressed with this. It'll probably work
quite a bit around our yardscape. Uh but
what we'll do is we'll come back a year
from now and let you know what our
experience has been and if it's lived up
to what we hoped it would do. For those
of you that wish to stick with something
a little bit more traditional, check out
the Felco F2 hand pruner. We did a
review on this uh worldclass pruner. Uh
they're not cheap, but they're really
good. And we'll walk you through why you
should consider becoming an owner of
one. Check that out. And until the next
time, this is Der Farmer Jay getting
ready to go and do some more pruning
around the house. We'll see you.