**Update video with additional info: • F15 ACTIVE Update Video | Best of Av... **
The F-15 given serial number 71-0290 had perhaps the most diverse range of duties of any F-15 ever built. Having first flown in 1973, it was the first two seat F-15 Eagle, and sixth F-15 built by McDonnell Douglas and was initially designated as a TF-15. The aircraft would go on to serve as a trainer, a testbed for the F-15E strike eagle, a technology demonstrator, and even a NASA research aircraft for several programs at the same time as the F16XL. Fun fact: This F-15 used F18 stabilator as canards, and performed supercruise research. We will look at all of those roles today but first let's take a look at the specifications of this airplane during its service with the NASA ACTIVE program:
Specifications Length: 63 FT 8 IN (19.42 M) Height: 18 FT 6 IN (5.64 M) Wingspan: 42 FT 10 in (13 M) Canard span: 25 FT 7 IN (7.80 M) Horizontal tail span: 28 FT 3 IN (8.60 M)
Maximum speed: 1,522 MPH (2,450 KMH, 1,323 KN) Mach 2
Empty weight: 35,000 LB (15,876 KG) Takeoff weight: 47,000 LB (21,319 KG)
This video is an opinion editorial commentary. Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for fair use purposes such as criticism, commentary, parody, news reporting, teaching, scholarship, and research.
All works used in this video (Images, audio etc) belong to their respective authors (This does not include the audio commentary or BGM).
Let's take a look at what could be the most modified F-15 ever.
The F-15 given serial number 710290 had perhaps the most diverse range of duties of any F-15
ever built. Having rolled off the assembly line all the way back in 1973, it was the first two
seat F-15 Eagle and the sixth F-15 built by McDonnell Douglas. Initially being designated as
TF-15, the aircraft would go on to serve as a trainer, a testbed for the F-15E Strike Eagle,
a technology demonstrator, and even a NASA research aircraft for several programs.
We will look at those roles today, but first let's take a look at the specifications of
this airplane during its service with the NASA ACTIV program. Length 63 feet 8 inches
Height 18 feet 6 inches Wing span 42 feet 10 inches
Canard span 25 feet 7 inches Horizontal tail span 28 feet 3 inches
Maximum speed 1,323 knots or Mach 2 Empty weight 35,000 pounds
Takeoff weight 47,000 pounds Service ceiling 60,000 feet
Engine thrust class Each Pratt & Whitney F-100 PW229 turbofan engines
Equipped with Pratt & Whitney PYBBN three-dimensional thrust vectoring nozzles
17,800 pounds of thrust dry or 29,000 pounds thrust with afterburner
The F-15, given serial number 710290, rolled off the assembly lines and into history in 1973
as the sixth F-15 ever produced and the first two-seater F-15. Intended to be used as a trainer
for the then all-new Eagle, this model was given the designation TF-15. That alone may have been
enough to make it a notable Eagle, but almost from its beginnings this airplane was destined
for research and discovery. In the late 1970s the development teams at the Langley Research Center
began exploring the concepts and benefits of thrust vectoring. These studies looked at 2D
thrust vectoring along with thrust reversing and as early as 1982 a model of an F-15 with 2D nozzles
was produced. Shortly thereafter aircraft 710291 was fitted with 2D nozzles and canards and flown
as a proof of concept. Based on this a contract was awarded to further study these enhancements
and this became known as the STOL MTD or short takeoff and landing maneuver technology demonstrator.
Prior to becoming part of the STOL MTD program aircraft 71-290 was busy serving as a test bed
for what would become the F-15E Strike Eagle. The Strike Eagle was McDonnell Douglas's response to
the Enhanced Tactical Fighter Program or ETF. Its competitor was a General Dynamics F-16XL,
a beloved aircraft that lost out due to its single engine and higher production costs
due to its modified wing. If you haven't already check out my video on the F-16XL.
Getting back to the STOL MTD program and aircraft 71-290. In 1988 as part of the program the aircraft
was given the distinct red white and blue paint scheme making it one of the most recognizable
aircraft ever to take to the skies above Edwards Air Force Base. The STOL MTD program had several
goals aside from the benefits of having a highly maneuverable airplane in a dogfight.
One of the key drivers of the program was an effort to improve ABO or air-based operability.
ABO deals with the survival and performance of combat aircraft operating out of damaged or
partially destroyed airfields. The STOL MTD program looked at ways that the aircraft could
take off from bomb damaged runways that were also wet, which made for highly challenging conditions
that would render most conventional aircraft unusable. By using the aircraft's canards,
reversible thrust engines, and exhaust nozzles that could deflect thrust up to 20 degrees,
the STOL MTD program achieved some remarkable results including controlled flight at angles
of attack as high as 85 degrees, in-flight rapid deceleration caused by thrust reversers,
takeoffs with rotation speeds as low as 42 miles an hour, and landing on 1,650 feet of runway as
opposed to the Eagle's standard 7,500 feet. All of these goals would be accomplished by 1991.
It is interesting to point out that the forward canards used on 71-0290 were actually derivatives
of the F-A-18's stabilators. Upon completion of the STOL MTD program,
NASA acquired the aircraft on loan from the Air Force in 1993. Under NASA, the aircraft was
re-designated number 837. However, upon closer inspection of the tail, you can still see the
Air Force serial number 71-290. Additionally, since it was a full-time research vehicle at
this point, the aircraft was given the classification of NF-15B. In service with
NASA, the engines were replaced with Pratt & Whitney F-100-229's. The F-100-229 is used
on production F-15E Strike Eagles, and the ones used on 837 included thrust vectoring nozzles
that allowed the exhaust to be rotated 20 degrees in any direction, while adding minimal weight from
the production engines. In this configuration, the aircraft first served in the Advanced Control
Technology for Integrated Vehicles, or A.C.T.I.V. program. The A.C.T.I.V. program investigated pitch
yaw balance beam nozzles, or P.Y.B.B.N., along with advanced control logic programming.
Using Aircraft 837, the A.C.T.I.V. program yielded some interesting milestones.
In 1996, the first supersonic yaw vectoring flight was achieved, with pitch and yaw vectoring at
speeds of up to Mach 2. On later flights, yaw vectoring was obtained at angles of attack as
high as 30 degrees. Additionally, successful development and testing of an adaptive performance
software program occurred. This performance optimization program, which was part of the
aircraft's flight control software, would automatically calculate the best trim or
settings for the thrust vectoring nozzles along with aircraft control surfaces to minimize drag.
The software was so effective, on its last flight in 1996, a speed increase of Mach 0.1
was gained with no increase in engine power at 30,000 feet. Subsequent test data from Aircraft
837 was used to improve the F-15E's Strike Eagle performance on ground attack missions.
The A.C.T.I.V. program ran from 1993 through 1999, and following the conclusion of the A.C.T.I.V.
program, Aircraft 837 would continue to serve as a testbed for NASA.
Next up was the High Stability Engine Control or HISTEC program, which looked at a computerized
system that would allow the aircraft's computers to enact engine trim changes in order to prevent
sudden in-flight engine compressor stalls, which would lead to engine failure. The concept was
successfully validated over a dozen test flights. Following HISTEC, the aircraft also participated
in high-speed research acoustics. An ongoing challenge with commercial supersonic travel is
the loud sonic booms that are produced. At the time, the high-speed civil transport was a proposed
second-generation American supersonic jetliner that was being worked on. Since Aircraft 837
had thrust vectoring nozzles, it was thought that a solution could be found to reduce engine noise.
The theory was that by fully expanding the exit area of the nozzles,
the hot jet exhaust entering the cooler air would reduce noise. Interestingly,
this involved flying the aircraft in precise patterns over an array of 30 microphones
which were spread out over a mile at Edwards Air Force Base. The research, while promising,
did not translate into the new supersonic transport. After the acoustics research concluded,
up next was the Intelligent Flight Control System or IFCS project. The project designated
Aircraft 837 as its primary research aircraft in 1999. The IFCS project implemented a neural
network along with control algorithms that would diagnose and react to changes in aircraft stability
and performance, for both normal and failure conditions. This adaptive neural network algorithm
learns the new flight parameters in real time and helps the pilot either maintain or regain control
as the situation warrants. Another research project that 837 was involved in was the Space-Based
Range Demonstration and Certification. This project was part of the Exploration Communications and
Navigation Systems program. The project focused on developing and demonstrating space-based
communication links for tracking data, telemetry, and flight termination systems. The hope was that
by developing a space-based communication system, operational costs of ground-based stations would
be reduced along with the development of applications for manned and unmanned aircraft
systems. The final research project conducted by Aircraft 837 was the Lift and Nozzle Change
Effects on Tail Shock or Landsats project. The goal of the Landsats project was to generate
computer models that could assist in developing supersonic civilian aircraft that were reduced
noise created by sonic booms while traveling over land. Aircraft 837 participated by having
another NASA NF-15B measure the shock waves coming from Aircraft 837's exhaust, wake, and
tail surfaces. And once again, while the research showed promising results, practical civilian
supersonic travel remained out of reach. Aircraft 710290 aka 837, the sixth ever F-15 produced and
the first two-seater F-15, took to the skies one last time on January 30th, 2009. Having an
illustrious career that spanned 35 years, which included 14 at NASA Dryden, it was time for 837
to fly off into the sunset. And as far as its legacy, it was the first aircraft to demonstrate
a self-repairing flight control system, the first aircraft to fully integrate an inlet engine flight
control system, and the first aircraft to have a propulsion-only flight control system. Along with
this, it served as a trainer and the testbed for the F-15E Strike Eagle. You'd be hard-pressed to
find an F-15 that has served more roles and contributed so much to aviation research.
Blue skies and tailwinds. Thank you for all you've done, 837. What do you think? Would you like to
see a series on NASA test planes? Let me know in the comments below. Thanks for watching. If you
enjoyed this video, please subscribe and click the bell for notifications. If you'd like to support
this channel, consider becoming a Patreon or make a purchase from the merchandise links below.
Stay safe and see you next time.