Why Movies From The 70s & 80s Look Like This: Kodak 100T 5247

Filmmaking Techniques
4 followers
This video is sponsored by Squarespace. Towards the end of the 70s and into the early 80s there
were a host of pretty iconic Hollywood films and if you take a closer look at them you'll see that
most of them share quite a similar look. The reds are punchy and saturated, the greens a bit cooler,
with deep crushed dense black shadows and full of subdued and neutral grey and brown tones.
While of course much of this was the product of what palette and lighting was in front of the
camera, another factor they all had in common was that they were shot on the same 35mm film stock,
Kodak Eastman's 5247-100T2. In this video let's take a look at this film stock,
it's characteristics, the new development process that it created
and why modern movies have a more diverse range of looks when compared to many of these films
from the 70s and 80s. If we look at some shots from a few different movies in this period which
were all shot on 5247 with a similar colour palette of greens, neutral tones and reds and
were all shot in natural exterior day lighting, it's easy to see that they share a pretty similar
look. If we look at the colour, the greens favour a deeper shade, which is typical of Kodak film.
The reds in particular stand out. They're very saturated and punchy, which is a bit of a
trademark of this stock. The blues of the sky are lighter, towards white, with more red or magenta
in them, especially in comparison to the deeper, more punchy cyan blues found in modern Kodak
stocks. In fact overall it has a bit of a trend towards reds, yellows and more neutral pastel
colours, with tungsten lit skin tones often getting a bit of a bronzed redness to them.
If we look at a vectorscope we see this. This line represents a good colour skin tone.
The modern Vision 3 stock lands on this line, however the older 5247 line goes a bit more to
the right, into a reddish hue. This older film also has less dynamic range than modern stocks do,
meaning it resolves a smaller variance between the brightest part of the image and the darkest part.
The 1970s film manages to keep detail in images with about 7 or 8 stops of light difference in
while modern stocks like 5219 have a dynamic range of around 14 stops.
What this means is that often brighter skies will start to look white and more blown out,
while shadows turn to blocks of pure black, compared to modern stocks that can hold and
roll off strong highlights far better, while also maintaining visible detail in areas of shadow.
The effect is that 5247 has a high contrast look, with deep shadows and bright highlights.
The datasheet even suggests exposing with an extra half stop of light if the palette of what
is being filmed is mostly made up of darker hues, to avoid crushing the shadows across the frame
and making images difficult to read. Beyond the look of the film, what are some of its more
technical characteristics that determined how 5247-2 was shot? I say two because the first
variation of 5247 film was introduced in 1950 with a mere EI of 16. It was later discontinued
and then the label was brought back as 5247-2 in 1974.
This film had an exposure index or EI of 100. You can think of this like ISO on digital cameras,
an indication of how sensitive the film is to light. Each jump up in EI or ISO is represented
by a stop, which means half the amount of light is needed to expose the image.
So a 200 speed film absorbs 2 times more light than a 100 speed film.
400 EI absorbs 4 times more light and 800 EI absorbs 8 times more light.
Therefore modern digital cinema cameras, which usually have EIs ranging from 800
up into the thousands, can shoot with much darker levels of light than this old filmstock.
Even Kodak's modern 5219 filmstock is rated at 500 EI, which means it absorbs 5 times more light
than 5247. What this meant was that cinematographers shooting inside studios
or in darker interiors on 5247 would need to pump in much larger amounts of light to
properly expose the image than by today's standards.
A by-product of low EI films is that they produce less noticeable film grain.
So for the time, 5247 produced quite a clean looking image, even if it feels quite a lot
textured by today's technological standards, which have seen a decrease in film grain and video noise.
Unlike digital cameras where you can precisely dial in your colour balance,
filmstocks come with one of two different types of colour balances, daylight or tungsten.
Daylight stocks are designed to reproduce true natural looking colour under sunlight,
while tungsten films produce balanced colour when lit by much warmer tungsten film lights.
5247 is a tungsten balanced film, meaning it should be shot under light with a 3200K colour balance.
When shot in these conditions it has an EI of 100, as we discussed. However, if cinematographers
wanted to shoot this film outdoors under natural sunlight or using lights with a 5500 colour
balance, then it was recommended that they add an 85 filter in front of the lens.
This orange filter would warm up and correct the colour balance,
however it would also decrease the exposure by around a stop.
Therefore when shooting with this filter Kodak recommended exposing with an EI of 64.
Which meant the filmstock needed to be given even more light when shooting under a daylight source.
Before we discuss why it is that modern films seem to have a more diverse array of looks than
back in the 70s or 80s, I'd like to thank Squarespace who sponsored this video.
Gone are the days where you need to employ someone with super advanced web design skills
to build a site for you. Squarespace makes setting one up simple.
It's easy to get started with their new Guided Systems Squarespace Blueprint,
where you can select from custom curated layouts and styling options to build an online presence
custom tailored to your liking. Then use their optimised SEO tools to get your portfolio seen.
You can also integrate and connect your social accounts seamlessly
to further promote your brand and get eyes onto your work.
So head over to Squarespace to get started with their free trial,
and when you're ready to launch go to squarespace.com
slash indepthcine to save 10% off your first purchase of a website or domain.
Film is able to record images by exposing it to light for a fraction of a second,
then later running it through a series of chemicals that fix that look onto the film as a negative,
which can later be turned into a positive image that can be viewed.
These emulsions are very sensitive, so if they are taken out of their can and exposed directly
to light for even a few seconds, they will turn completely black and will be impossible to record
to. To avoid this happening, film needs to be handled completely in the dark, from when it's
removed from the can, loaded into the magazine, removed from the magazine and developed.
After development the footage gets baked into the film and it can be viewed in the light for
as long as you like. One of the reasons that 5247 is quite a pivotal moment in Kodak's history
is because it introduced a new way of developing the film, called ECN2, which is still used to
this day. This updated the original ECN process making it quicker to develop the film and more
environmentally friendly. One thing that makes ECN2 different to how 35mm stills photos are
processed with C41 is due to how cinema film is shot. Stills cameras only need to take one
photograph at a time, whereas to create motion cinema cameras take 24 or more photographs every
second. This meant the film needed to move through the camera faster, which in turn made it more
prone to getting scratched as it flew through and came into contact with mechanical parts inside the
camera. To solve this an anti-halation remjet layer at the back of the film was introduced
to protect it from getting scratched. ECN2 has an additional two steps at the beginning of the
development process designed to get rid of this protective layer before the film is then developed.
Returning to the initial question of why many movies during this period in the late 70s and
early 80s looked the same can be answered by, because there were very limited options of what
film stocks cinematographers could shoot on. And those film stocks to a large degree determined how
colour was captured and represented. Cinematographers did have a few ways to control how the colour
turned out, but these tools were much more rudimentary and basic than what we're able to do
today. After the film has been developed into a negative, it needs to be printed onto new film
as a positive at the film lab. If they wanted to control the look or do colour corrections,
they could do this here with printer lights. They could control how much red, green and blue
they wanted to add to the print by adjusting the strength of these different lights when they
converted the negative to a positive. It was also possible to do other tricks in development,
such as a bleach bypass, which would create a more contrasty, stylised look. Or use effects
or colour filters in front of the lens while shooting, to create a look with a different tint.
However, nowadays this colour correction process is handled entirely digitally
with computers and software and is called the digital intermediate or colour grade.
Files from digital cameras or film negatives which are scanned and converted into digital files
can be manipulated in grading software such as DaVinci Resolve or Baselight.
This software allows more granular corrections to be done, such as isolating certain parts of
the image using power windows or adjusting only certain hues. It also makes it easier than ever
to test and create different types of looks for films. Because of these advances in grading
software and cameras with increased dynamic range and colour flexibility, we can go beyond
just creating a consistent colour balance based on whatever film was being shot with
and move into creating different looks. These looks could be emulations which try to mimic
the look of a film stock, or any number of digitally created looks by colourists.
This is why overall the colour in many modern films seems a bit more varied than movies from
past periods, which were all shot on the same film stock and developed and printed in a very
similar way. I see these advances in technology as a positive that have made it easier than ever
to manipulate colour in the way that best suits the story of the film.
Hope you enjoyed the video. As always thanks to all of you for supporting the channel by watching,
commenting and especially to those that get the videos early on Patreon.
Otherwise until next time, thanks for watching and goodbye.
