How to Calibrate a Tensile Testing Machine | Step-by-Step Guide for Accurate Results
Prestogroup Online
1 follower
1 Video View·May 7, 2025
Learn how to calibrate a Tensile Testing Machine for accurate and reliable test results. Calibration ensures the precision of load cells and extensometers, which is essential for testing the tensile strength of materials like plastic, rubber, metal, fabric, and more.
For more information visit our website:- https://www.prestogroup.com/products/tensile-testing-machine-computerised-cum-digital-model/
So, this is our presto tensile tester.
The purpose of making this video is to understand the calibration process.
We will be calibrating the load cell with the dead weight.
So, we will be using a dead weight of 10 kgf and we will be doing the calibration of our
load cell.
So, it depends on the manufacturer guidelines, we will do as per ours.
So, for load cell calibration, we are using a 10 kg dead weight.
So, we have to go in the parameter, we will be calibrating the load.
So, we will first do the calibration 0.
So, this is the first step of calibration, we have to just 0 the whole value, then we
have to again enter and now we have to apply the dead weight.
So, we will be applying a 10 kg dead weight.
So, make sure that at initial stage you do not apply the weight.
Now we have applied the dead weight.
Now whatever dead weight we are using, we have to write that value only.
So, right now if I am using 10, then I have to write 10.
So, this is the 10 kgf weight I am calibrating the machine.
So, now we will end it and we will go in the main screen.
So, we can see the load is showing 10.
So, now we can just see that it is showing correct weight, we have reduced the weight
and again we will apply the same 10 kg.
So, we will see that everything is functioning correctly.
So, now the machine is correctly calibrated.
So, how we proceeded?
First we have to go into the parameter.
So, it is dependent on the manufacturing guidelines.
However, the process is the generalist in this that first we have to 0 the value, then
we have to apply the weight, the dead weight, we have to fix the value of dead weight and
then we have to go back to the main screen and just see that what is the load applied
and this is how your load cell will be calibrated.
So, thank you.
