Forging a Traditional Swedish Hewing Axe: Recreating the 1700's Craft

Traditional Metal Crafting
21 followers
3 Video Views·Apr 24, 2025
In this video, me and my friend Nicholas Erb forged a traditional 1700's Swedish Timber Bila or Hewing axe as it is usually called in English.
It was a lot of fun even though we were on a tight time crunch :)
Enjoy
/Nils
Check out Nicholas channels:
/ swedishaxes
Find me on instagram:
/ nilsogren
My Website:
https://www.nilsogren.com/
Email List:
https://www.nilsogren.com/contact
LINK TO NORDFORGE:
https://www.nordforge.com/
In this video I'm going to show you how me and my friend Nick made this beast of an axe.
Organized, always be organized when you're forge welding.
Hey, so we've made it to the point where we have the three main pieces of the axe
and now our job is to forge weld them all together.
So we're going to start with these two and then we'll add the blade.
everything done and we need to put on the blade and what we're going to do is that we're going
to heat up both sections at the same time to welding temperature and we're going to run in
here and Nick is going to place the edge and the blade on this little anvil here and I'm going to
place the body on top of it and hopefully I can weld it together and we get a completed axe.
Yeah, go.
Thank you so much for watching the video, I really hope you enjoyed it.
So in today's video we made this which is, what is it?
It's a traditional Swedish 1700.
So it's a hewing axe or a timberbila in Swedish and they're used for making log homes
which were common throughout Sweden and continue to be today.
Boy, was this a challenge.
Was a beast, looks like a beast.
We had like, we had a set time that we needed to finish this on and I've tried this once before
a long time ago and before I even knew what I was doing but doing this now,
especially when you're on the time, what do you say?
Time crunch.
Time crunch, that was insanely stressful but I think we managed to pull something out that's
well, decent at least and I think we're pretty happy with it.
Yeah, I mean it captures the look absolutely, the style, it's got the long collar which is
common with the early Swedish timberbilas and it's the form work, I'm pleased.
Yeah, me too.
Can you tell the viewers a little bit about the history behind it?
Why did they have these long collars for example?
So in the Viking era, we start to see that the eye of the axe is not supported enough
and that breaks the handle.
So the Swedes and a lot of other European countries came up with the idea of if you
increase the surface area that the handle has inside the eye, the handle will be more durable
and so this is a common practice throughout Europe.
The French do it slightly differently, the Germans do it a bit differently
but the Swedes had these long beautiful handles and you also see this in Finnish examples.
And it's also the case that sometimes they didn't wedge it, right?
Because they could easily switch handle.
Is that a myth or is it true?
It's a long thin taper so there's tons of surface area and lots of friction inside.
So if you broke the handle you could switch it very easily because you didn't wedge it
and it goes to quite a small end.
And the most common, at least in some places in Scandinavia,
wood available was birch which is not the strongest wood that you could use for a handle.
Yeah but it's great for a handle because it's more flexible
so it absorbs the shock of hitting the wood and also it's easy to carve.
So if you're in the field and you break a handle,
you can carve yourself a new one with an axe head and a knife.
Oh that's so cool.
Yeah I've heard that before that they used...
This area where I'm in right now, where I'm from,
birch was the most common wood, the most common handle material back in the day.
And I think, is this a myth or not,
but the longer handle also helps stiffening the birch a little bit.
Is that true or is it just a myth?
It supports it.
You want the flex back here where your hands are to absorb that shock
but you need the stiffness because you're accelerating that mass into the tree.
Oh that's so cool.
So I've been chasing this axe for a long time.
There is an article in a book about how to forge this axe and I studied that.
This is the fifth version of this axe I made.
The first time I made one, I flew to France and was part of a large organization
that did a week-long project making these axes.
And I made two of them with a Norwegian smith named Terje Grøn.
Oh that's so cool.
This definitely was a challenge for me and I was very happy to have Nick here with me
during this very, very tough but fun challenge.
And I hope this inspires you to try something yourself
and get out there and blacksmith something.
It's good for you.
All right, thank you so much for watching.
Please hit the subscribe button if you haven't done so already.
Like the video if you liked it.
If you want to check out more of Nick's work,
you can find it in the description down below.
Thank you so much...
Thank you so much for watching.
I'll see you in the next video.
Goodbye.
