Super Fast 3D Modeling Staircase Method in SketchUp!

LeMaster Tech
183 followers
3 Video Views·Apr 21, 2025
This video shows the fastest way to quickly extrapolate a full 3 dimensional staircase in Sketchup without using premade components!
A quick outer dimensions rectangle extruded into a 3D block capable of housing the full staircase can quickly be marked up and used to generate a full staircase of any size!
Thanks for watching, be sure to leave a like and subscribe if you found it useful and check out the channel for tons of other content!
what's up you guys welcome back to the
channel and today i'm gonna give you the
absolute fastest way to make a staircase
in sketchup
[Music]
all right so in 3d modeling with
sketchup stairs are one of the more
frustrating things for some people to
make because it's time-consuming it's
kind of
non-rectangular and it seems like it
could take a lot of time but there's a
really fast method to do this so to
start make a rectangle that's the base
shape of how many
of the space that your staircase takes
up so if you had 12 stairs that were
you know three feet wide so your
stairwell's three feet wide and they
have 10 inch runs on each staircase
12 stairs is going to give you
36 inches wide
and then 120 inches long
but then if they have let's say eight
inch rise from
step to step
12 stairs is going to make it eight feet
tall so make this three dimensional cube
that basically could hold your staircase
inside of it
and then draw a line from bottom left to
top right
and then take this line one of the
vertical corners
right click the vertical line and do
divide and then you can either type in
or physically drag up and down along the
line how many total segments you want it
divided into but you should see now if
you run your
draw tool up and down the line you can
see where each segment starts and stops
so go ahead to the bottom segment and
just draw a horizontal line from the
edge to your diagonal line and then
delete out the diagonal line then grab
the vertical and horizontal segment of
just that stair grab the move tool hit
the bottom left of these hit control to
and then drag it up into position where
it should go
go ahead and uh click it in there but
then type star 11
or star however many additional steps
you need so you have the first step so
do your total number of stairs times one
and then it
is going to copy that pattern down the
object and then you can get rid of this
top excess by just using the extrude
tool the push tool and just get rid of
it and then if you want to get rid of
the excess on the underneath as well you
can go ahead and
just
draw a line that shows like your
stringer so you can
you can make it sort of relative to the
other stairs or you can do actual
measurements if you want
but then you can also push that excess
away and there you go in like two
minutes you get an entire basic
staircase that looks really good and all
of a sudden now you know you can have a
two-story model going on so super useful
tutorial super quick i hope you found it
enjoyable if you do want to see anything
specific in the future just let me know
about in the comments below i'll get but
i'll get back to you as soon as i can
and be sure to like the video subscribe
to the channel for tons more content
just like this coming out all the time
thanks for watching good luck with your
projects bye
