The western sector of the Principality of Asturias is an area rich in mining basins and forests, which facilitated the establishment of an artisan industry for the manufacture of knives and pocket knives in Taramundi, whose quality has been popularly recognized. With some artisans I was able to learn about the production of these famous cutting tools in 2000.
🎁 If you liked this documentary, you can show your SUPPORT and HELP so that the channel continues to grow with the “Thank you” and “Channel Member” buttons that appear below each video.
📚 You can also get my BOOK "100 OFICIOS PARA EL RECUERDO" (in paper or digital) at https://amzn.eu/d/cDUgSaE
🤠 I encourage you to learn more about my life, work and career in this BIOGRAPHICAL DOCUMENTARY: • EUGENIO MONESMA. 40 años de vida, tra...
📲 Follow me on my SOCIAL NETWORKS: -FACEBOOK (Spanish): / eugeniodocumentales -FACEBOOK (English): / eugeniomonesmalosttrades -INSTAGRAM: / eugeniomonesma -TIKTOK: / eugenio_documentales -TWITTER: / eugeniomonesma -TELEGRAM Group: https://t.me/eugeniomonesma_documentales
These are a piece of cow's tail, which would be this before chopping it, before chopping it is this.
We chop it there with the saw and then we take out these pieces.
Well, now we are going to start cooking these tails to prepare to put them in the press and cool so that later we can continue with the part of the mango.
That has to be between 10 and 15 minutes to cook there, it depends on the thickness of the tail.
Now I'm putting them in the middle of the steel slats to then press them and let them cool so that they are straight.
This is what we are going to do now.
Now we are finishing tightening the tails until they cool so that they are straight.
Now I am going to forge a blade to continue the work of what is a knife.
This is what we call first the shape, making the shape of the blade.
Then we are going to give it the second pass, which is what we call flattening, it is as if it were straightening.
And I take it out again to finish.
I take this punch from here, which is with which I am going to put the mark of the house.
Here we go to this chisel and cut the blade to leave it in its final measure.
Before tempering the blade, the blacksmith straightens it after applying a layer of soap.
The return of the blade is a heating that lowers its hardness and prevents it from breaking like a glass.
This is where the soap takes effect.
No, it is not, so that it looks better in the hardness that remains, because of course.
Now this has to be hardened by the color.
Here the color comes out, here it cannot come out because it is all black.
The sheets tempered on both sides retain the quality of the blow and gain a resistance that prevents them from breaking.
Before it was completely white, now it has such a color, but I said, of course, don't you see it?
And it has two colors here, from there down and from here down.
Why? Here it is not practically tempered, from here down yes.
Once the blade is tempered, it goes to the sharpening grinders, where Manuel takes the edge of the knife.
I just sharpened this, now, and there is the difference between a sharpening and a pure sharpening.
The blacksmith continues the work by returning to the blades, which have already cooled.
Now we are going to match them so that they are more or less uniform.
I am going to cut the wood for the handles of the knives.
In addition to the peculiar cow blades, traditionally the handles of the Taramundi knives were made with the abundant woods in the area.
Brezo can be used, tejo, nogal, or all woods are valid, but here we normally use red.
The saw is the tool that Manuel uses to cut the slit that will serve as a receiver cavity for the blade.
Well, this is now embedded in the wood, we are going to remove the excess wood and leave the handle as normal.
Drill the first wooden handles.
The handles of the knives are subject to rivets that cross them transversely and for which the craftsman has to drill some holes.
Now I'm going to put the rivets on the wooden handles.
A mixture of aluminum and iron is the material with which these rivets used to hold the pieces to the handle are made.
This knife is already prepared to sand and polish and it is already finished.
Fix it and polish it and it's out.
The cow handle receives another more laborious treatment, which begins by reinforcing it in the middle with brass plates that protect it from rust.
Yes, this has to be left, well, it can be approached a little, but then it is better to leave it there for fifteen days than two,
so that the slits that were cooked end up, that they go down to their own, because this goes down, down, down,
and then these slits are left out, which is very ugly.
It should never be hit against the outside because it would break, it should always be filed against this.
Manuel works the adjusted and finished handles with the saw, file and sandpaper until the surfaces are perfectly polished.
Now I sand the blade, I polish the blade.
These are the secrets of the forge of the knives of Taramundi,
whose meticulous elaboration has allowed them to survive the impacts of the Industrial Revolution,
which ended with the old ironworks.
I am Eugenio Monesma, director and producer of the documentary you have just seen.
If you liked it, I encourage you to subscribe by activating the notifications from the bell
and so you can enjoy the hundreds of documentaries that I already have on the channel and of which I will be uploading weekly.