Nearly everything in blacksmithing can be made using a small number of basic or fundamental skills. In todays video I talk about what I feel are the 7 fundamental skills of blacksmith. In future videos we will look at each technique in greater detail.
If you enjoy my content here in YouTube shorts please visit my other 2 channels Black bear Forge - / blackbearforge featuring blacksmithing tutorials OR John Switzer - / johnswitzer Featuring more vlog type content outside of the shop
Black Bear Forge is sponsored by:
Combat Abrasives - http://bit.ly/3r73P8d Use code "Blackbear10" for a discount on your next order
When it comes to the art of blacksmithing,
there's really just a small handful of basic techniques
that makes everything else possible.
Today, I would like to talk to you about
what I consider to be the seven basic techniques
of blacksmithing.
Now, depending on who you talk to,
different people are going to include different things
in their list of what they consider basic techniques.
A lot of them kind of overlap and they're similar.
For instance, cutting a bar to length
is very similar to slitting a bar down the middle.
It's essentially the same tools.
So I'm not going to make things like that
into separate techniques.
I've seen lists of five and seven and 10 and 12,
15 different techniques.
But to me, it really boils down
to seven different techniques.
So let's get started and look at what I consider to be
those seven basics of blacksmithing.
The first technique is drawing out.
This is making a bar longer and skinnier,
or tapering as it is sometimes called.
This is probably one of the things
that you're going to do the most.
And while it's generally thought of in length,
you can also spread a bar to make it wider and thinner,
but it's also getting a little bit longer as you do that.
So drawing out lengthwise or spreading sideways,
really pretty much the same technique in my book.
Now, do you need a bar shorter and fatter?
Well, that process is called upsetting.
And that's done simply by driving one end of the bar
down towards the rest of the bar.
That can be done just with a hammer
or the bar can be driven down against the face of the anvil
or perhaps on an upsetting block on the side of the anvil.
Blacksmithing has been around way longer
than efficient drills and drill bits have been.
So putting a hole in a material requires punching,
and this is frequently done hot at the anvil.
And it's really a pretty simple technique
once you get used to it.
Now, earlier I mentioned cutting or slitting.
That's simply using a chisel or perhaps a cut-off hardy
to cut a bar to length,
or a chisel to cut a bar lengthwise
so that it can be split into something like a fork
or a branching scroll element.
Bending is another technique often used
in conjunction with that splitting.
If you're making a scroll,
you gotta bend the scroll to shape it.
That's sometimes done over the horn of the anvil.
Sometimes it's done with bending forks.
Twisting is fairly self-explanatory.
It's just putting a twist in a bar.
Sometimes it's for ornamental purpose,
and sometimes there's a practical purpose.
It's because you need the bar to be offset 90 degrees
from the original plane that it was laying in.
And the final technique,
one that a lot of people don't consider
to be basic blacksmithing,
but I consider it to be part of your basic skills,
is forge welding or fire welding as some people call it.
This is getting two pieces of material hot enough
that they will bond together when brought to the anvil
and struck with a hammer.
A lot of people consider forge welding
an advanced technique,
but the sooner you learn it,
the better rounded blacksmith you'll become.
Those then are what I would consider
to be the seven fundamental skills of blacksmithing,
or perhaps the seven basic skills of blacksmithing.
Drawing out, upsetting, punching, slitting, or cutting,
bending, twisting, and forge welding.
All very basic techniques.
It's just how you bring all those techniques together.
This one bar, we upset to form the scarf for the weld.
We put a twist in it,
and we welded a railroad spike to the end of it.
So there's three different techniques,
actually four because the scarf is a form of drawing out.
Didn't show that to you.
We'll talk about that in the forge welding section.
This little bar, we showed how to punch a hole,
how to slit some little ears out here,
and then how to bend those.
Did a little bit more bending
by looking at a simple scroll.
Now I'm going to do a separate video
on each of these techniques
and get into much more detail
on different ways you can draw out a piece of material
and what you should expect is a rule of thumb
as you draw material out
for how long it should stretch in certain circumstances.
And we'll do a separate video on upsetting,
and punching, and slitting, and forge welding,
and all the other techniques.
So we'll have seven more videos in this series.
I do hope you enjoyed this video.
Give it a thumbs up if you did.
Don't forget if you're interested
in longer, more detailed content
on the art and the craft of blacksmithing,
check out my main channel,
which is simply named Black Bear Forge.
You'll find over 700 videos over there
that I've done over the past few years,
covering everything from basic tooling, basic techniques,
and more intermediate,
and starting to get into some more advanced techniques.
But we're going to cover some of those
more basic techniques here as well
over the next few months.
And if you're simply interested in what I'm up to
and I'm not in the shop,
I have a third channel simply called John Switzer,
and that's where you'll see what I'm doing
when I'm not blacksmithing.
Anyways, I hope you have time in your day
to get out to your shop,
make something, but stay safe, wear your safety glasses.
We'll see you for the next video.