DIY French Country Spring Home Decor using IOD & Redesign | Pentart Fine Line Crackle | Paint Inlays

Craft & DIY
230 followers
8 Video Views·Apr 10, 2025
Learn how to create French Country Home Decor using IOD's New Spring Melody Paint Inlay & Redesign with Prima Moulds. Learn how to use Pentart Fine Line Crackle for a vintage look. Learn how to use Redesign Moulds with air dry clay. Create budget friendly Spring Home Decor out of thrifted items.
Comments are disabled for this video.
Hi everyone, it's Erin from The Provincial Farmhouse. Today I'm going to be creating
some French Country Spring Home Decor. For my project today I'm going to be using this little
writing box here that I had in my stash for a while. I really loved the shape of it but it was
very dated and I'm actually going to be doing this up for my own home. So my first step is to
take some 80 grit sandpaper and I'm using this to try and level out all of those paint brush
marks and the raised paint because I don't want to be able to see that underneath the paint and
products that I'm going to use. I'm also wiping off that dust with a wet wipe. Next I am going
to use my drill to remove the little hinges that are attaching the lid for this writing box and
then I'm going to be using Paint Couture's 2-in-1 Primer in white and I'm going to be applying that
over the entire project. I'm going to apply one coat, let it dry for about an hour and then I'll
come in with the second coat and give that several hours. So the primer is going to make it so that
my paint sticks really well. This has a little bit of a glossier finish but it's also going to block
any of the little paintings that are on there from bleeding through my paint. Once I finished
painting the outside of the little writing box, I painted the underside of the lid and of course
the inside of the writing box there. I then took out Paint Couture's Farmhouse Linen Chalk Paint.
I'm going to end up doing two and a half coats. I say two and a half because the third coat was
really just a touch-up coat, just working out where I needed to add a little bit more of that
paint to get the coverage that I wanted. Once my paint was dry, I took out IOD's new Spring
Melody Paint Inlay. So this is filled with beautiful rabbits and flowers and I am going
to be using this beautiful rabbit twirl. This is the green toned twirl. I'm just cutting out what
I need. I don't want to cut off any of the bunny's ears or anything and I do end up going back and
cutting a little bit more of that plant. I wasn't sure exactly how much of it I would need so I'm
going to cut that out so I can try and piece that design back together. So I'm just working out here
how that's going to sit and then I'm going to apply another coat of the Farmhouse Linen. I'm
going in a little bit heavier here because I need to sit my paint inlay in that wet paint. I'm
misting the paint side of the paint inlay and then I'm going to press it into my wet paint.
Once I have it in position, I'm going to gently smooth that out so that I have good contact
between my paint inlay and my paint. I'm coming in with my water mister a little bit more as well.
I did add in that extra little plant piece down the bottom and after I'm happy with how damp that
is, I'm going to use a wet wipe to apply a little bit more pressure. I let that dry completely and
you can see it's become a bit opaque again so I'm going to dampen that with my water mister. I'm
going to give it then about 60 seconds for that water to really soak in and then I'm going to
start pulling the paint inlay back. If you feel any resistance when you're pulling, just put that
back, mist it a little bit more, give it a bit more time and then you can try again. I was really happy
with how this transferred into the paint. I did have a couple of areas like that little plant
there. Unfortunately, I just mustn't have had enough paint on my surface there so we did have
a little spot there and a little bit on one of the bunnies that didn't quite work. I am then going to
cut out some of these rose trim pieces. This is another page from the Spring Melody paint inlay
and I am going to be adding that to the front section first. So again, laying down a generous
amount of that Farmhouse Linen Chalk Paint and then adding the paint inlay and misting it and
applying pressure. So a little bit repetitive but I just definitely want to show you guys these are
really easy to use and you get a beautiful hand-painted result. So here I'm just going to
start peeling back that paint inlay and I also added these little roses to the sides of my little
writing desk piece there and I'm just going to gently pull that away. In some areas it didn't
transfer completely but again this definitely gives you a hand-painted really unique beautiful
look. I came in the next day so I let it dry for about 24 hours and I am sealing it with Paint Couture's
Extreme Guard in Satin. Now you can sometimes reactivate the paint pigments so if you're worried
about this I would suggest using a spray sealer but as long as you give it lots of time to dry
and you use a light hand I find I don't have too much trouble. I'm going to continue adding the
Extreme Guard in Satin over the entire desk project. I then took out Redesign's Chantelle
mold and I'm going to be working in my Dusk Air Dry Clay into that mold. I've already dusted it
with cornstarch so that it doesn't get stuck in there. I'm just using my fingers to push out that
excess clay then I'm going to flex the mold flip it over and gravity is going to help my casting
release. Now I really wanted to add some feet to the bottom of my little desk piece there but there
was too much of a gap I thought it looked a bit odd so I decided that I was going to add some trim
to the bottom of the little base there of my project so I'm just dusting the design that I
want. This is I believe Regal Trimming's mold and I'm just working my clay into one of those
designs there and once I'm happy with how that's looking I'm going to flex that Redesign mold flip
it over and again gravity is definitely a big help here. I'm just checking here how it's going to sit
on the edge and yes I'm happy with how that looks it's going to fill in some of the gap there
and definitely make it look a bit more seamless. I'm going to go back to the Chantelle piece that
I already created and I'm going to glue that down and I'm going to have this in the center. I
definitely wanted a sort of a focal point in the center there the twirl was beautiful and I wanted
something though that wasn't going to block off too many of those beautiful little twirl bunnies.
I've already ended up casting I think I casted about five of the Regal Trimming's molds and I'm
going to begin gluing those around the edge of my little desk writing desk piece there and these are
designed to be interconnecting so I am joining those up best I can. Sometimes I'm using a wet
wipe to sort of blend the two pieces together you can also fill that in with a little bit more of
that air dry clay and I'm just going to continue working my way around the piece and gluing down
those trim pieces. If I inspire you to try any of the redesigned molds used in today's video I would
really appreciate it if you would use my affiliate link you will find it in the description below.
Once I had all of the trim pieces down I took out IOD's lock and key mold and I'm going to be casting
this sort of horizontal style lock design there I really wanted something to go on the front of
the writing desk piece there and I thought this would be perfect it was the perfect shape so I'm
going to add some glue to the back of it and make sure that I have that glue spread out and then I'm
going to position it in the center on the front part so that it looks like there's a little lock
on this piece. I let my castings dry for several hours and then I came in with a little bit more
of that farmhouse linen I'm just going to go over the top of the chantelle piece that's on the top
there I just wanted to cover up some of the areas that are a little bit darker because of the glue
that I used to attach it and then once that was dry I then took out Pentarts fine line crackle
medium now I'm applying component one I have never used this before I did do a practice piece before I
tackled this but this literally arrived in the mail today so I was very excited to try it out
and get those sort of larger cracks I do like to definitely try out new products and I felt
like it would definitely pair really beautifully with this sort of vintage rabbit twirl design
so I'm just applying that fine line crackle component one I let it dry completely and then
came in with component two and I'm going to apply that over the top unfortunately once this was dry
I did notice that there was quite a bit of that sort of brown tone left behind by component two
thankfully I am going for a vintage look so it didn't bother me too much I think I must have
applied a little bit too much of that product if you've used it before and you've got any tips for
me definitely let me know I definitely want to learn more about this really cool product as you
can see I've moved on to applying that component one to the rest of my project and then I'll come
in with component two once the component two was completely dry I did go in with some extreme guard
in satin and I'm just applying that over the top of my casting I'm going to be coming in with a
solvent-based wax so I want to be able to wipe it back so as you can see here I'm coming in with
Pentarts antiquing paste there in umber I believe and I'm going to begin adding that just with a
paper towel I'm going to work in sections and then I'm going to pick a cleaner part of the paper towel
to wipe back that excess now you can see some of that component two that sort of has discolored my
surface a little bit but it definitely sort of just ties in with what I have going on anyway and I
love how this looks this is definitely a new favorite it is just the perfect amount of crackle
once I finished adding it to the lid I then moved on and added it to the rest of my project
I often get the question if I paint the bottom of my pieces sometimes I do or sometimes like
with this piece I'll just go in and tidy it up and remove any of that excess paint
I then took out Paint Couture's Van Dyke Brown Antiquing Glaze and I'm going to apply that over
the top of my castings this pretty closely matches the Pentart paste that I was using
but I didn't want to use that I wanted to stick with a water-based product over my mold so I
could sort of more easily wipe that back so I'm just going to continue to apply that to my casting
until I'm happy with how that looks once I finished adding the glaze to that top piece
I then started adding it to the key casting or rather lock casting that I have on the front
there just wiping away that excess and then I did go in and start adding it to the trim pieces
around the bottom at this point I wasn't a hundred percent sure exactly where I was going with the
so I definitely like to move on to glaze and create that sort of depth in my piece
before I move on any further and if you like this look you could definitely leave it here I am
going to end up adding some more products but this is just showing you how it would look if
we just stuck with that glaze look once I finished adding the glaze to those other sections I took
out Paint Couture's Bronze Luxe Metallic and I'm going to come in and go over the top of the trim
pieces that I have down the bottom there and I am going to continue adding that around the entire
base as I was adding it I decided I want to do the bottom section in that bronze as well so it
sort of made that entire section look a lot more cohesive so the very bottom section is going to
have that Bronze Luxe Metallic I did end up doing two coats of this to get the coverage that I
wanted in those different sections and I did go in and add it to the lock design also the trim
around the rest of the piece as well I added the bronze there I was definitely going for quite a
gilded French look for this one I started off adding the bronze to the bow and a couple of
the details on that mold I do end up adding a bit more a bit later to seal those paint products in
I'm going to be using this spray sealer it's definitely something you want to use over the
top of solvent based products I then took those little feet out and I'm applying some Gorilla
Super Glue Gel to those and applying pressure on the bottom I will go in a little bit later
and add in those screws this is just for that immediate hold and also to make sure that I'm
happy with how that's looking so I'll repeat the same process for each of those feet and then I
moved on to adding the hinges back onto the little lid of the writing desk box there just adding
those screws back in so that I can attach all of that back in one place you can see I was keeping
those little tiny screws in a ziplock bag I definitely recommend that when you are dealing
with jewelry boxes and things like that I then went in with some bronze luxe metallic and added
that to those little feet I felt like this tied those sections together at this point I did then
decide that I wanted the top Chantelle casting to be completely bronze I felt like it just needed to
be a little bit more of a statement so I did go in and I ended up adding two coats of the bronze
luxe metallic on all of the areas of that casting just so that it really it definitely was sort of
like the centerpiece of the project and here's a look at our finished project I love how this turned
out that spring melody paint inlay is so beautiful and I had so much fun using Pentart's fine line
crackle for the first time let me know what you think of today's project in the comments
if you enjoyed today's video I would really appreciate it if you would hit that like
subscribe button and the notification bell so that you don't miss out on any of our videos
you can find most of the products used today on our website theprovincialfarmhouse.com.au
thanks for watching
