DIY French Country Thrift Flips using IOD | High End Thrift to Treasure | Cottage Farmhouse | Spring

Decor with Me
7 followers
Learn how to use the new Iron Orchid Designs Paint Inlay and Stamps to transform Thrifted Finds into high end French Country Spring decor for your home. Also learn how to use Patina Paint for a rustic finish.
#iod #thrift #frenchcountrydecor
Hi everyone, it's Erin from The Provincial Farmhouse.
Welcome to my channel.
Today I'm going to be doing some French country
thrift flips using IOD.
You can find a full product list
in the description of this video
and all your crafting needs on our website,
theprovincialfarmhouse.com.au.
We're starting with this sweet little paper mache bunny.
Now this isn't a thrifted find,
but I thought that it was super cute
and perfect for an Easter project.
So to begin with, I'm mixing some buttercream
chalk mineral paint by Dixie Bell
with sea spray.
This is a texture additive that you add to your paint.
How much you add is up to you.
The more you add, the thicker your texture.
And it's very easy to use.
You just dab it on
and it gives you a beautiful textured finish.
So while this isn't a thrifted find,
I thought this was something great to show you guys
because often we do come across little animal figurines
and this is a really easy way to update them
and give them a nice makeover
depending on what your style is.
We are going for obviously a French country look.
That is my favorite.
And I'm adding this texture
because we're going for a bit of a weathered look.
So I'm dabbing and stippling this on
and as I'm doing this, it's creating small little peaks.
Now, if you didn't want that look,
if it was a little bit too rough for you,
once you have actually added your product,
you could go back in
and you could actually flatten the peaks
while the product is still wet
or you could even take a little bit of sandpaper
to knock down some of those peaks as well.
I'm coming in now
and I'm adding some more of that texture to the base as well
and then I'm gonna let this completely dry
before the next step.
Next, I'm going to be using Dixie Belle's patina paint.
I'm using the iron color
and this is going to give us a rust effect.
So I'm going to stir the product really well
and then I am going to use a small artist brush
to dab the product onto my surface.
Dabbing the product on creates texture
and that's another reason why we used the sea spray
because obviously rust isn't going to be flat
and perfectly smooth.
Rust actually often looks really crusty
and to give it a more authentic look,
I do try and use sea spray
and I also stipple my product on.
There's no real right or wrong way to add this product.
I'm just picking certain areas
where I imagine rust might accumulate,
where moisture might fall
and I'm just adding it randomly.
Now this is just the first coat.
We're doing this first, then we let this dry
and then we are going to come back in
with the same patina paint
over the top of where we've already gone.
Dixie Belle's patina paint range
also comes in a bronze tone
which gives you a little bit of a blue patina
and also a copper which gives you more of a green look.
Once my first coat has completely dried,
I'm going to come back in with another coat
and I'm adding more of that iron patina paint
over the top of the areas
that have already dried from my first coat.
Now I'm going to do this relatively quickly
because for the next step,
I need this second coat to still be wet
for my green activation spray
to actually work and create the rust.
So next I'm grabbing the green activation spray,
I'm pouring it into a little container
and then I am dabbing the product
onto all of my wet iron patina paint
and you can see there's bits dribbling
down here and there.
That doesn't matter, we can always wipe that back.
You want to get a generous amount of that green spray
onto your patina paint.
So I keep saying green spray
because it does come with a spray attachment.
However, I find that to be quite messy.
I like to pour mine out,
have more control and use a brush instead.
So after about an hour,
that beautiful rust has started to show
and it will continue to develop.
Now I'm coming in with some more of that buttercream
and I'm just dabbing and stippling
around the edges of the rust.
I just want to tone it down just a little bit
and I think that this sort of blends it a bit better
with the rest of the bunny
instead of it being very obvious spots and splotches.
So this is going to sort of get it to blend in.
And here's our finished rustic bunny.
I'm really happy with how this sweet little bunny turned out.
The Dixie Belle Patina products are a lot of fun to use
and you could hardly believe
that this was paper mache before.
Let me know what you think of this in the comments.
My second project today is this silver tray
that I've already sprayed with Rust-Oleum Clear Matte Sealer
to prep it for paint.
And I'm going to come in now
with Dixie Belle's Buttercream Chalk Mineral Paint.
The chalk paint makes it a lot easier
for my paint to stick to the surface.
And I know I'm going to have some people upset
that I painted this,
but trust me, this was not a collector's item.
It was scratched up and it was $2 at the thrift store.
We're going to give it new life.
I've done two coats of buttercream
and now I'm going to use IOD's Melange Paint Inlay.
We're going to be cutting out
this beautiful floral design here.
And I'm also going to cut out a little bit of text
to use down the bottom.
Next, I'm going to apply a nice even coat
of the Buttercream Chalk Mineral Paint.
When you are using paint inlays,
you need to apply them to wet paint.
I've already done a lot of videos on this.
So for my lovely regular viewers,
I hope you're not sick of these yet.
I just have so much fun using them.
So I'm applying a generous coat here.
I want to make sure I've got enough
that my paint inlay will have something to grip onto.
And then I'm going to grab my paint inlay
and press it design side down into my wet paint.
That grid should be facing up at you.
I'm going to very gently add some pressure
and smooth out my design.
Once the first inlay is down,
I'm adding that little bit of text down the bottom.
I'm then going to grab my water mister
and I'm going to thoroughly mist the inlay.
This water is going to help activate the paint
and get the whole process going.
And then I'm going to grab a damp cloth
to apply a little bit more pressure,
make sure all of my inlay is making good contact
with my paint.
I'm just gently dabbing.
And you can also come in with a brayer for this step.
After about 30 minutes, my inlay is dry.
It will appear faded when it's ready.
I'm going to use my mister
to thoroughly dampen the inlay again.
This is going to help it to be able to be released.
I'm also using a cloth to dab off some of the excess.
You want to give it about 60 seconds
before you actually start pulling the inlay away.
So I'm going to find a little corner
and start very gently removing the inlay.
I'm going to set this off once I've removed it
off to the side to dry
because I will get another one or two uses out of that.
So I'm then going to repeat the same steps
for the inlay up the top,
finding a little corner and then very gently
and slowly pulling the inlay away.
If you are new to inlays,
the melange paint inlay that we're using today
is a great one to start off with
because there's lots of beautiful little images
like this for you to get started.
When your inlay is dry,
it's best to seal it with a spray sealer
as brushing on a sealer can cause it to smudge.
So I've sealed this up with Rust-Oleum's Clear Matte Sealer
and now I'm coming in with Dixie Belle's Grunge Glaze
and I'm paying particular attention to the border,
wiping off a lot of the excess in the centre
and allowing it to sit in some of the cracks
around the outside so that it adds some age.
Finally, I'm going to add a little bit
of Dixie Belle's Bronze Gilding Wax around the outside.
And here's our finished French country tray.
I love how this turned out.
I can definitely see it on someone's coffee table
or sitting up on a shelf looking beautiful.
These inlays are amazing.
You really can transform something plain
into something beautiful.
Let me know what you think of this in the comments.
Our third project today is this little wooden bucket
that I picked up for $3 at the thrift store.
I'm going to be using Dixie Belle's Silk Mineral Paint
Sunkissed and I'm going to apply a thick coat.
This is going to be my only coat,
but I'm not being careful to get full coverage.
I actually want a lot of that wood showing through
to give this a really aged appearance.
I'm also working it around the top.
I'm not worried about it going on the metal of the bucket.
I actually want a little bit on there
and I'm also going to paint the inside.
Silk Mineral Paint is really great
for those quick projects
because it has a built-in stain blocker
and a built-in top coat.
Once my paint is dry, I'm coming in with a wet wipe
and just chipping off some of the paint
that's on that metal to give it a bit more
of an authentic chippy weathered look.
I'm then going to be using IOD's La Campagne stamp
and I'm going to be using the smaller little sheep design.
So I'm adding some of IOD's Black Permanent Ink
to the stamp.
You could also use paint for this.
Once I've got enough ink on the stamp,
I'm going to very carefully position where I want it to go
and then very carefully press it down.
This is a curved surface,
so I definitely need to take my time with this
and be careful not to let it shift.
So I've always got one hand holding the stamp in place
and the other hand applying pressure where needed.
Once I think I've got enough of the stamp down,
I'm carefully pulling it away.
I did miss a little bit of the ear,
so I just carefully repositioned it and pressed it down.
This isn't a perfect image because my paint is chippy,
but I'm more than okay with that.
And here's our finished bucket.
I'm really happy with how this turned out.
I think that that little sheep stamp
is absolutely adorable.
Let me know what you think of this in the comments.
Our final project today is this little jug.
Now, I didn't mind the pattern on it,
but it was very, very chipped and discolored in places.
So after priming it with Rust-Oleum's Clear Matte Sealer,
I'm applying several coats
of Dixie Belle's Cotton Chalk Mineral Paint.
It is a lovely bright white,
and I wanna keep the inside the same color,
so I tried to stay with a tone that was similar to that.
I know I've done quite a few jugs lately,
but honestly, they're one of my favorite things
to do with stamps.
Once my paint is dry,
I'm going to be using IOD's Antiquities Stamp.
I'm specifically using the design
that has the Gabrielle text and the lovely florals around it,
so I've pulled it off the backing
because we're working on a curved surface,
and I'm applying IOD's Permanent Black Ink.
When I've got enough of the ink on there,
I'm just going to tidy up a couple of areas
where I got a little bit of extra ink on there,
and then I'm going to carefully position the jug
so that it makes stamping it a little bit easier,
and I'm going to carefully turn the stamp over,
hover it over where I want it to go,
and then very carefully press down.
I'm starting in the center first,
and then I'm going to carefully press it down on the bottom,
and then work my way on the sides
and press it down on the top.
You definitely need to take your time
when you're working on a curved surface.
This particular stamp had a few intricate design elements,
so I did have to sort of isolate
and press down certain areas more than others.
Next, I'm going to use IOD's Vintage Textures Stamp,
specifically the Crackle Stamp.
I'm going to be using the IOD Black Ink again,
and I'm just going to ink up a small little area,
and I'm going to lay my jug down
and randomly and lightly press the stamp
against my little jug there.
I love using this one on the jugs
because it does add a little bit more authenticity.
It definitely makes it look a little bit more weathered.
Once my ink is dry, I'm going to seal the entire jug
with Rust-Oleum's Clear Gloss Sealer.
I like my ceramics to have a little bit of a shine.
And here's our finished jug.
I just love how you can take some paint and IOD stamps
and completely transform something that was chipped
and tired and turn it into something
that someone would love to have in their homes.
Let me know what you think of this in the comments.
I really hope that you enjoyed today's video
and that it's inspired you to maybe give
some of your items at home a makeover.
Let me know what you think of today's projects
in the comments.
Let me know if you had a favorite.
If you enjoyed today's video,
I would love it if you would give it a thumbs up,
comment, and share it out to someone else
that you think might enjoy it.
If you enjoy thrift flips,
make sure you check out my other playlists.
I have lots of ideas and inspiration for your projects.
Also, please subscribe if you haven't already
and hit that notification bell
so that you don't miss out on any of our videos.
You can find all of the products used in today's video
on our website, theprovincialfarmhouse.com.au.
Thanks for watching.
