We had been looking for an automatic chicken door that opens in the morning and closes at night keep our chickens relatively safe from predators. During this video, Steve provides some details and installation instructions for the automatic chicken door produced by Omlet.
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ For Further information about this Chicken door go to: https://bit.ly/3BOyL1H
When purchasing, use the following code and receive 10% discount: ICULTIVATE
HOW CAN YOU SUPPORT US? ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ It would be a pleasure if you support us! Get our Merchandise from https://bit.ly/3dFQxHV
JOIN THE iCULTIVATE ONLINE COMMUNITY ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ Website: https://icultivate.net
G'day, welcome to iCultivate. My name's Steve. Welcome to our chicken house.
For some time now I've been concerned about predators accessing our chickens and ducks
and so what we're going to be looking at today is an automatic door system provided by Omelette.
So far we've been really lucky when it comes to predators and our chickens and ducks.
We haven't had a problem yet but I'm mindful of the fact that that might not always be the case.
Currently this door here is the only access for us and our chickens into the chicken house
and we have to open and close it every day and that sometimes is problematic. So what we're
going to look at is an automatic door system for this chicken house. So let's have a look.
And as per the set time for our door, here they come. You know we couldn't be happier with this.
We set it to open in the morning and the chickens are able to come out and it then automatically
closes at night and we don't have to worry about predators and any other problems occurring with
our chickens and ducks. So we couldn't be happier with our automatic chicken door from Omelette.
If you'd like to know more there's a link down below but stay with us on this video and you will
see its full installation and exactly how easy that process is. For some time now I've been doing
some research into automatic chicken door openers and this is the one I've come up with. It's the
auto door by Omelette. Now in the interest of transparency I just want to let you know
Omelette have provided me with this door for the purpose of putting into my chicken house
but I have not been paid for anything else. So this is my honest review of this product.
So let's have a look at it. So let's take it out of the box. So we've got a very substantial book
of instructions here in a range of different languages which will be very helpful for
this installation. We have here the actual door. This is the controller and we'll look more at that
when we're actually getting the installation completed.
And then there is of course the actual door itself. So this is the Omelette door.
So the first step to our automatic door installation is the assembly of the door
itself. There's a couple of things we have to do but I promise you it's not that difficult.
In a packet there are a number of screws, a gear and a gear retainer. So we have to assemble these
as a part of the door first and then the last thing we have to do is to put these door retainers
in so that the door is actually fixed to the assembly and currently it's not actually fixed.
So we have to assemble it first. So let's get that done. So step one is take the door out
and we have to go to this area here where the gear needs to be installed. So we take these screws out
making sure that we keep these very secure and then with this section removed we can then
add the gear. Now it's important to ensure that it is installed all the way down and then we can
add this retainer that Omelette provide with it. With that retainer in place and the gear in place
we then screw that back down into place being very careful not to over tighten the screws.
The next step is to put the door into the fully open position making sure that it slots into the
gear that we've just installed. Flip it over and then we need to put the door retainers into place.
And then firm down with the screws. There's one at the top and one at the bottom. So now we have
the door fully assembled ready for its installation. It will be going here so what I will need to do
is to mark out where the hole in the wall will need to be cut and then we can go from there.
So I'm going to cut that hole now and we'll come back in a tick. So with our door assembled our
hole cut we now need to attach the door to the wall in the appropriate position and mark some
points where we need to drill to fasten the door to the wall. So with our holes drilled top and
bottom we can then use the fasteners provided by Omelette to attach to the wall. Now the next step
in our Omelette automatic door installation is the actual controller itself. The controller has a
light meter in the front here and if we open up the cover we can see the control panel here as
well. So the first step is to remove the screws from the front and then to take off the back and
I've already removed the screws and add our batteries. So I'm going to do that and then we
need to install the actual connecting cable. There is a cable retainer here that we have to remove
first so I'll do that. Plug in our cable and then route the cable around through this
weather seal at the bottom here. Put the retainer back in place ensuring of course that we don't
over tighten the screws and then we can attach our back plate back on. So you can see that we've
now got the controller in place. The main thing you need to be mindful of when it comes to choosing
the location for your controller is that it does receive suitable natural sunlight because if
you're going to set it up so that it opens and closes the door based upon sunlight you need to
ensure that it is actually able to detect what the natural light is at the time. I would also
recommend that you put it at a location that is convenient for you as the owner to use rather than
having to be down low and so on. So with this all now installed I just need to fasten back my cables
so that they're out of the way and don't get hooked up on anything and it's just now a matter
of setting up the door to open up as per your own requirements. Now the Omlet door comes with
three options for how it is controlled. The first is a manual open and close. The second is closing
and opening based upon a specific time within the day and the third is based upon light. Now
there are some really good detailed instructions within the actual instruction booklet on how you
do each of those things. I'm going to go with setting it up based upon a specific time of the
day. So you can see now that we've got our Omlet automatic door installed. If I hold the OK button
what will happen is I can manually close the door and you can see that it is now closing
and likewise if I hold the OK button again again it will now start to open up. So we have this
ability to manually open and close even though I've set this now to open and close based upon
a specific time within the day. Opening in the morning at about six o'clock and closing in the
evening at about 8 pm. So with this now fully installed I can certainly say that it was a
simple process to get it into our chicken house. I'm now looking forward to seeing how our chickens
will actually respond to having this door opening in the morning and closing in the evening without
us actually having to do that for them. But I'm expecting that that will be quite an easy and a
good process for them. So I certainly would recommend this product to you. If you would like
to have a further look at this go to the link that you will find down below this video
and have a look for yourself. Now I hope you've enjoyed this video. Can I ask you please to give
us a thumbs up, subscribe to this channel and go to our website iCultivate.net
and become a member of the community. Thanks for watching.