Stop hand-watering your garden beds - drip irrigation does the work for you, and it's easier to install than you think. In this step-by-step guide I'll show you everything you need to install a drip irrigation system from scratch - from laying the drip line to connecting the fittings and setting your timer. No plumbing experience needed.
Links marked with * are affiliate links - I may earn a small commission if you purchase through them at no extra cost to you.
By the end of this video you'll be able to: ✅ Set up a complete drip irrigation system in an afternoon ✅ Water your garden automatically without waste or runoff ✅ Save hours of hand-watering every week
Drip irrigation delivers water directly to plant roots, reducing evaporation and keeping plants healthier than overhead watering. It works for vegetable gardens, raised beds, flower beds, and any water-wise home garden - and once it's set up, your garden waters itself.
💬 Questions about your setup? Leave a comment below - I read every one.
HOW CAN YOU SUPPORT US? ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ This is how we make our living and it would be a pleasure if you support us! Get our Merchandise from: https://icultivate-shop.fourthwall.com/en-aud
G'day, welcome to iCultivate, my name's Steve. Here in Australia, and I know in many other
locations around the world as well, we've recently been suffering from some extreme
heat events. And those heat events have been playing havoc with our garden. Now when we have
this sort of thing happen, one thing that we need to ensure is that our plants continue to get enough
water. So I'm going to be looking at today one way in which we can do that. I'm going to be
The situation for this particular garden is exacerbated quite a bit, because as you can see,
the actual garden itself is directly below the eaves of this building. This means even when we
get good rain, it doesn't necessarily mean that this garden bed will also get that rain. So that
means that these plants actually suffer quite a bit, even when there's plenty of water. So I need
to make sure that these plants are getting enough water to meet their needs. To do that, I'm going
to need a few pieces of equipment. The first of those is this brown hose that you can see here.
This is a drip line hose. Now you can usually find them in any gardening supply place, and they are
not really that expensive. So I'd encourage you to go and look for them in your local gardening
supply retail outlet. Just keep in mind, they do come in a number of different diameters.
Generally speaking, I would prefer that mine was larger than this, but I was given this, and
I'm just going to make do for these purposes. The second thing you're going to probably need is a
timer, because you don't want to be going out and turning the tap on and then off each time you want
to actually have the watering system running. So this particular timer, again, this is quite a cheap
version, just runs on a battery, and I can set the time that the water flow begins and then ends.
And we'll talk more about that as we get further into this video. The last thing that I'm going to
use is, you can see here, I've made up using some heavy gauged wire, some staples, and I'm going to
use these staples to hold down the drip line in place so that it doesn't move. So let's get into
installing this. First of all, it's worth having a look at this soil. Now even though we, in just the last
two days, we've had more than 100 mils, or four inches if you prefer, of rain, the soil that is here
is still quite dry. So my fear is, because this soil has been protected from the rain and therefore
been quite dry for a long period of time, that it may have become hydrophobic. So I may have to treat
the soil with a solution to help with water absorption as well as installing this system.
But we'll have a look at that as time goes on and see how we go. For the moment though, I'm just going
to clear back the mulch and that will give me a path or a track along which I can put the system
in place. So let's go on with that. So you can see here now that I've cleared an area into which I'm
going to place the drip line hose. So as you can see, what I'm doing now is just lying out the line
approximately, making sure that there's no kinks in it, and I'll come back once I've got it laid
out approximately and then I'll put the staples in to hold it in place. So as you can see, I'm now
placing the... see that kink that just occurred there? I have to actually make sure that those
kinks don't stay. I'm actually going to use these staples to help shape the pipe so that the kink
does not stay. Okay, so I'm happy now that that kink is not going to occur again.
And so you can now see that I've got the drip line hose actually laid out within this garden bed
here, stapled down by staples that I made just from a thick gauge wire. But importantly, you
will notice that right there is the end and the end is open. It's not closed off. So the death
of any drip line watering system is material getting into the line and clogging it up. Once
that happens, you might as well replace it. So the whole idea is to flush it out from time to time.
To do that, you just need to open up the end and run the water through it without the end being
sealed off. The other thing that you absolutely must have in a drip line watering system is a
filter at the tap. So the whole idea is that that filter captures any material that passes from the
tap through the water into the hose. It captures it before it gets into the hose. So you will need
to make sure that you check that filter from time to time. This is that filter right here.
Okay, so let's now turn it on and see whether there's any leaks in any place along the system
where there shouldn't be, and also that the water is flowing freely all the way through to the end.
So far so good. Let's go and have a look further along the line. Okay, so clearly the water is
flowing out the end, and you can see a few little drips starting to occur here.
Let's plug up the end and see if the flow from the drip points increases. Okay, so I think you
can probably see the drips are actually starting to increase. Okay, so look, I'm pretty happy with
that. So all I really need to do now is to cover back up the drip line with the mulch and then set
the timer so that it runs for the desired length of time each day, or perhaps each week, depending
upon the sort of garden bed you're watering. And there we have it, a drip line watering system in
this garden bed, a garden bed that typically does not get a lot of water even when we get good rain.
The other thing to remember is that water loss from the soil is minimized by this watering system.
Firstly, the amount of water that is added is kept to a minimum, and secondly, because it's
underneath the mulch, water loss by evaporation is minimized. So as a reward for those of you who
have stuck it out this long, I'm going to give you some pro tips for the installation and then the use
of your own drip irrigation system. So the first pro tip is make sure that you flush out your lines
before you actually clamp it off at the end and run it for the first time. If there is any soil
or grit inside that line, that soil or grit is going to clog up the actual drip points. So save
yourself some hassle right from the word go and ensure that you flush out the line. The second
pro tip is make sure that you have a pressure regulator in your system. You can see mine just
down here. This is really important because the pressure that comes directly from the tap
is most likely going to be much greater than that which your system is designed to cope with.
So make sure you get that pressure regulator in place. And my final pro tip for this video about
drip irrigation systems is make sure that you use pegs or perhaps staples like you saw me do earlier
to actually staple down or hold down the hose along the length of your watering area. You'll
find that when the drip system kicks in and the pressure moves through the hose that that will
have the effect of moving the hose and so over a period of time that can actually displace the hose
and perhaps even cause weakness in points where there are joints. So make sure for this final tip
that you actually fix your line down using staples or perhaps pegs of some type. Now I hope you have
got something from this video and you've enjoyed it. Can I please ask you to go to the thumbs up
and give us a thumbs up and don't forget subscribe to this channel and go to our
website iCultivate.net and become a member of the community. Thanks for watching.