How to Make Your Own Surf Weights - Save Money Pouring Your Own

The Lawless Tide
42 followers
2 Video Views·Mar 24, 2025
How to make your own surf weights - save money pouring your own. Surf fishing weights are an expensive tool if you really think think about what they are. Its a hunk of lead that you cast into the ocean. Instead of paying retail price for surf weights why not invest an affordable amount of money in the tools to make your own surf fishing weights.
If you like to surf fish then more than likely you use surf fishing weights whether that's pyramid
sinkers or claw or spider weights. So you probably purchased them at a tackle store or walmart or
even ordered them online. So you probably realize that for just a hunk of lead they're pretty
expensive. As you can see here you're gonna pay about eight dollars for an eight ounce spider
weight. So if you purchase 12 weights then you're already at about a hundred dollars and for right
around a hundred dollars you can get everything you need to make your own weights. So I'm going
to show you how to make your own surf fishing weights. You can actually save a lot of money
by pouring your own weights. To pour your own weights you got to have three things. You have
to have lead, you have to have something to melt it with, and then you have to have molds to make
the weights. Prices for lead melters range from fifty to eighty to a hundred dollars and most
weight molds come in at just under fifty dollars a piece. So for a hundred bucks you could have a
lead melter and a weight mold which is the same price you would pay if you purchased about 12
eight ounce claw sinkers. I purchased all of my lead equipment from Do It Molds online store.
They have just about any mold for any weight you could ever want online but today we're going to be
concentrating on spider or claw weights. So first I'm going to go over a few safety tips and then
the equipment that you need to make these weights and then you can actually watch me make a couple.
So let's get started. There's basically four things you need to follow safety wise when you're pouring
these lead weights or lures. You always want to have eyewear, eye protection. Obviously you want
gloves. You also want to wear a long sleeve and long pants while you're doing this because there
are it's happened to me a few times where you get a small splash and something shoots out
a little spot of lead that'll burn you good. So you want to make sure you got long pants,
long shirt on. Also you want to do it in a well ventilated area. Vapor that comes off of the lead
is very toxic. You don't want to breathe it. You don't want anybody in your family breathing it so
make sure your best bet is just to do it outside or in a really well ventilated room but I would
suggest doing it outside only. Okay tools you're going to need. You're going to have to have pliers.
They don't have to be anything fancy. You just want at least two pairs so if you need to
manipulate two pieces at the same time you can. Needle nose are really good for making your claws.
You can get a very small sharp bend in them with the needle nose pliers. Come in a lot real handy.
You're going to need a mold. I use eight the eight ounce a lot for my surf fishing shark rigs
so I pour a lot of eight ounce weights. You're also going to need stainless steel or galvanized
wire for the claws and you're going to need a smelter or lead melter. You can get those online.
I give a Bass Pro. They range anywhere from 50 to 150 dollars but the people I've talked to they last
forever so it's a pretty good investment and last you're going to need lead. Now let's talk about
where you can find lead at. There's a lot of places you can get free lead. A dentist office
they use it in their the film that they use to take pictures of your teeth. Call them up and
ask them if they have any and they'll just give it to you. Wheel weights although they're not as
common as they used to be. Lead wheel weights are still around. You can stop by auto shops, tire shops.
A lot of times they'll have them. They'll just let you have it free. Pharmacies that deal with
radioactive medicine they have what's called isochores where they take the radioactive
medicine and they literally drop it in a bucket of solid lead. There's a hole cut out. They stick
the medicine in it and then they put a lead cap on it. Well after they use those a couple times they
dispose of those and they wait till all the radioactive material is depleted from it and
then they get rid of them. Pick those up for free too a lot of times. Doctors offices anywhere that
they do x-rays is always going to have lead. If you can find an old doctor's office that used to
do x-rays they'll have lead lined walls. If they're tearing it down you can ask them if you can have
lead you can get enough lead for five lifetimes from a doctor's office like that. Car batteries
are also a source of lead but it's kind of a dangerous process to remove lead from car batteries
so I would research that pretty intensely before you take that on. Scrap yards but usually the
scrap yards are going to make you pay for it. You can buy lead online from lead dealers. Fast Pro Shop
or Cabela's places like that they'll sell lead ingots online. You can buy those or the bulk lead
sellers like I said online are going to be cheaper than buying retail lead. Put your mind to it you
can find free lead. It's around you just got to search a while and put in the effort to find it.
Okay first thing I like to do is preheat the mold so you want this mold to be warm
when you pour in your lead because you'll get crinkles and wrinkles in the actual pour
so I like to heat it once and fill it up each time. There's one and then
there's two. Just leave that in there a minute let the heat sink into it. I've got all my wires
it's better just have them all pre-cut and bent and ready to use before you start because once
you start pouring you don't want to stop and have to take a break to cut more wire. After it's
preheated just pull them out and drop them back in and then you want to close this back while
you're getting stuff ready so it holds in more heat. All right we got two links here with all
these wires coming out it's a lot easier to just pour one size at a time as you can see there's a
five and a half and an eight and I'm doing eight today because that's mainly what I do when I
use my cast out rigs for sharks. So what you do you see how I got that one fitted in there
and then you want to slip that one right on top there just like that. Now that I've got them both
held right there I've got to shut this you'll see how they all fit see how it's closed all the way
there's no gap all the wires are sticking out. So I'm just going to take this and line it up
under the spout get the glove back on all lined up ready so
there you go pretty simple all you want to do on this you don't want to cut you don't want to cut
these with cutters it leaves a real sharp edge on there if you use cutters so while it's still warm
just grab that with pliers and then wiggle it back and forth comes off and leaves a pretty smooth
surface there so drop that back in left over you can always reuse everything all the lead
got one forward all right I'll do another one for you here real fast and these do have to be
different lengths because as you can see this one's going to be higher up than this one is
and it's always better to make your wires too long than it is too short because you can always
cut more off but you can't add any back on got that shut okay no gaps
line her up
so I showed you all the prices that these range online so if you can find your lead for free
and basically you've got to buy the wire a mold and the melter
and if you use quite a few weights a year it'll be well worth your time and money to just make your
