I Recreated an Edwardian Dress (Part 2): Fashion Plate Skirt & Final Reveal

Edwardian Threads
5 followers
3 Video Views·Mar 25, 2025
This idea started in December when a friend suggested we challenge each other to recreate a fashion plate. After searching through a bunch of pictures we settled on these two Edwardian dresses. This video is part two of the process.
Welcome back.
This is part two of me making
this fashion plate.
So my last video, if you didn't see it, I made the bodice and
now we are starting on the skirt.
And hopefully it's easier than the bodice.
We'll see. It's a skirt. I've made millions of skirts, right?
Right. Right.
I am using Truly Victorian's trumpet skirt pattern with the round length and pleated back.
I'm cutting out a pattern for a skirt.
And I can already tell
it's
going to be much longer than I need it.
Oh, the joys of being short.
I don't really want to take it out of the middle because of the way that it trumpets out. All of a sudden
your lines are like this.
And so
I don't know how to fix that.
So I'm just going to take it off the bottom.
It'll be fine. That's what I usually do for my skirts anyway.
Good news. Once I tried on the skirt with the boots that I plan on wearing, it was actually not
that much longer than I need it to be.
Massive ruffle. Hemmed. Now it's time to gather this baby.
Ruffle's done. Mama does twerk. But you know what?
It's on the lining.
So it doesn't even matter.
Make a decorative point to the center back edge at bottom of top stitching.
We'll see if I can even make it through here.
Let alone make it decorative. It's a lot of fabric.
How's that for a decorative point? Can she do it on the other side?
No. Probably not. But let's try. Honestly,
it's not bad.
Expected it to be a whole lot worse.
Okay, I'm a little late today.
So I had a little problem with the skirt.
Somehow
it ended up three inches too big.
I don't know how. I'm blaming user error.
Um
and after I had a little panic about it,
I realized it was actually not that big of a deal because it's gored. So I just took in
each seam
an extra quarter inch and kind of blended it back into that half inch seam allowance.
Worked out perfectly. Now it fits.
And all I have to do is hem it
and put on the trim on the bottom
and then it's all done.
In order to do the hem, I have to make bias tape for the facing and bias strips for
the hem stiffener. They have instructions on how to create a bias
strip using a square.
I've tried this before
from a video. I didn't have success, but let's try it with this drawing.
See if I can make this work.
Magic!
I'm looking at this picture
and
trying to figure out where to place this. I think
this,
if this is two inches here,
this is either supposed to be
an inch and a half
or an inch. So I'm trying to figure this out. So
here's the inch
and then
an inch and a half.
I don't know
if this is supposed to be
half that width or just slightly less than.
Hmm.
When I started making this skirt,
the hem ended up being much
longer
than I expected it to be.
And I realized that the 10 yards
of velvet ribbon
that I had was not going to be enough.
So I ordered more.
It came in yesterday.
It's out in the mailbox.
But the mailbox door is broken
and I can't get into it.
So I can't finish the skirt.
The mailing man saved me.
Okay, let's finish this up. Um, I was going to do
three inches,
but then when I saw it, I was like, no, I think that's too
close.
So
I think
five inches is
probably closer to what it should be.
So I'm gonna do this five inches apart from this middle one.
And yeah, that's all that I have to do.
The last thing I did was I added
two hooks and two eyes to the back of the bodice and skirt to keep the bodice in place when it is being worn.
It's done.
You know, when I made the bodice, I wasn't quite too sure whether I liked it or not.
But I just put it on and
I
love it.
I'm hoping this weekend if it doesn't rain,
maybe we can have a picnic and have like a ridiculously cute video. We'll see.
So
If you liked this video, please like and subscribe and comment and if you didn't see
the first part of me making the bodice, I have linked that down below
and I will see you in the next one.
